

Stm32f401 devboard
stm32f401
- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 49
- Pads
- 201
- Tracks, vias
- 512, 43
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Aug 2021
- Updated
- 26 May 2026
Overview
Stm32f401 devboard is an open-source printed circuit board by syabyr, from the syabyr/stm32f401ccu6_devboard repository on GitHub. It is a 4-layer board of 50 × 50 mm with 31 parts on 49 nets, routed with 512 tracks and 43 vias.
It is built around the LM1117-3.3. Its parts include 10 capacitors, 7 resistors, 4 connectors, 3 switches and 2 ICs. It belongs with the microcontroller boards boards and the STM32 boards of this library.
Main components
1README
README.mdstm32f401ccu6_devboard
stm32f401
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R7 |
| 5 | 15p | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4, C5, C10 |
| 4 | 1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6, C7, C8, C9 |
| 3 | SW_Push | mybays_connector:turtlekey | SW1, SW2, SW3 |
| 2 | Conn_02x12_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | J2, J5 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D3 |
| 1 | 0 | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 2.2u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 1 | 32.768K | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | CORTEX-DEBUGGER | mybays_connector:debugger_2x05_P1.27mm_Vertical | CON1 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | STM32F401CCUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | USB_C | mybays_connector:USB_C | J1 |
More from syabyr/stm32f401ccu6_devboard
1- 2 layers53 × 21 mm

Similar boards
- 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers52.5 × 36.6 mm

ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
52 parts453 - 2 layers95.2 × 57.2 mm

- 2 layers189.5 × 204.9 mm

SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!
749 parts292GPL-2.0 - 4 layers121.9 × 109.2 mm

Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
300 parts227 - 4 layers113.5 × 105.5 mm

Multistepper
eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32
243 parts208 - 2 layers275 × 103 mm

- 2 layers43 × 34.3 mm

Questions
How big is the Stm32f401 devboard PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Stm32f401 devboard use?
31 parts, built around the LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm32f401 devboard KiCad files?
From the syabyr/stm32f401ccu6_devboard repository on GitHub, at the commit this page was made from: the board is stm32f401_devboard.rev2/stm32f401_devboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm32f401 devboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask syabyr before reusing the design.