

Nrf51822 devboard
- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 47
- Pads
- 177
- Tracks, vias
- 390, 34
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Mar 2021
- Updated
- 2 Dec 2025
Overview
Nrf51822 devboard is an open-source printed circuit board by syabyr, from the syabyr/nrf51_proj repository on GitHub. It is a 4-layer board of 50 × 50 mm with 34 parts on 47 nets, routed with 390 tracks and 34 vias.
It is built around the LM1117-3.3. Its parts include 14 capacitors, 4 connectors, 3 inductors, 2 ICs and 2 switches. It belongs with the microcontroller boards boards and the nRF52 and nRF5x boards of this library.
Main components
1README
README.mdnrf51
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380 | H1, H2, H3, H4 |
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C10, C11, C12 |
| 2 | 12p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6, C7 |
| 2 | 12pf | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C4 |
| 2 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J2, J3 |
| 2 | SW_Push | mybays_connector:turtlekey | SW1, SW2 |
| 1 | 1.0p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2 |
| 1 | 1.5p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1 |
| 1 | 10nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L2 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 1n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C13 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14 |
| 1 | 2.2n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8 |
| 1 | 2.2p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5 |
| 1 | 3.3nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1 |
| 1 | 32.768 | Crystal:Crystal_SMD_G8-2Pin_3.2x1.5mm_HandSoldering | Y1 |
| 1 | 4.7nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L3 |
| 1 | 47n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9 |
| 1 | Antenna | RF_Antenna:Johanson_2450AT43F0100 | AE1 |
| 1 | CORTEX-DEBUGGER | mybays_connector:debugger_2x05_P1.27mm_Vertical | CON1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | R_Small_US | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | microusb | mybays_connector:USB_Micro-B_Wuerth_629105150521_CircularHoles | J1 |
| 1 | nRF51x22-QFxx | Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mm | U1 |
More from syabyr/nrf51_proj
2- 4 layers50 × 50 mm

- 2 layers

Similar boards
- 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers52.5 × 36.6 mm

ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
52 parts453 - 2 layers95.2 × 57.2 mm

- 2 layers189.5 × 204.9 mm

SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!
749 parts292GPL-2.0 - 4 layers121.9 × 109.2 mm

Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
300 parts227 - 4 layers113.5 × 105.5 mm

Multistepper
eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32
243 parts208 - 2 layers275 × 103 mm

- 2 layers43 × 34.3 mm

Questions
How big is the Nrf51822 devboard PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Nrf51822 devboard use?
34 parts, built around the LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nrf51822 devboard KiCad files?
From the syabyr/nrf51_proj repository on GitHub, at the commit this page was made from: the board is devboard/nrf51822_devboard.rev2/nrf51822_devboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nrf51822 devboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask syabyr before reusing the design.