Skip to the content
2 layers50.8 × 20.3 mmEthernet pmod, the printed circuit board in 3D

Ethernet PHY PMOD (Microchip LAN8720A PHY)

Size
50.8 × 20.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
29
Pads
114
Tracks, vias
264, 18
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
29 May 2022
Updated
29 May 2022

Overview

Ethernet pmod is an open-source printed circuit board by swetland, from the swetland/ethernet-pmod repository on GitHub. It is a 2-layer board of 50.8 × 20.3 mm with 26 parts on 29 nets, routed with 264 tracks and 18 vias.

It is built around the LAN8720A-CP. Its parts include 12 resistors, 9 capacitors, 3 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

readme.md

Ethernet PMOD v2

This PCB is a PMOD (FPGA development board peripheral module) for the Microchip LAN8720A PHY, to enable 10/100M Ethernet connectivity.

It is configured to accept the necessary 50MHz clock from the FPGA, and exchanges data using the RMII standard. A secondary header provides access to the MDIO/MDC lines to allow access to the management interface.

I have manufactured 10 of these using JLCPCB's PCB fabrication and assembly service (manually soldering the two throw-hole components myself) and have used this PMOD successfully with Litex / LiteETH / VexRiscv on a Muse Lab iCE Sugar Pro FPGA board.

This project is licensed under the CERN OHL P v2 Permissive Open Hardware License.

Design Files and Resources

Original design files are here: kicad/

Schematic in PDF format here: export/ethernet-pmod-v2-schematic.pdf

Gerbers and CSV files used for a successful JLCPCB order, under export/jlcpcb/

Documentation on the Microchip LAN8720A: https://www.microchip.com/en-us/product/LAN8720A

Pictures

final assembled pmod

pmod in use

PMOD Connector Layout

pmod connector

Parts

26
QtyValueFootprintReferences
410KResistor_SMD:R_0402_1005MetricR8, R9, R10, R11
449.9Resistor_SMD:R_0402_1005MetricR1, R2, R3, R4
30.01uFCapacitor_SMD:C_0402_1005MetricC1, C2, C3
21uFCapacitor_SMD:C_0402_1005MetricC4, C5
21uFCapacitor_SMD:C_0603_1608MetricC6, C7
2270Resistor_SMD:R_0402_1005MetricR6, R7
10.022uFCapacitor_SMD:C_0402_1005MetricC9
11.5KResistor_SMD:R_0402_1005MetricR12
112.1KResistor_SMD:R_0402_1005MetricR5
1470pFCapacitor_SMD:C_0402_1005MetricC8
1Ferrite BeadInductor_SMD:L_0805_2012MetricFB1
1LAN8720APackage_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalViasU1
1MDIOConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ3
1PMODFrotzNet:PMOD_Peripheral_Conn_2x06_P2.54mm_VerticalJ1
1RJ45_AMP_RJMG1Connector_RJ:RJ45_Amphenol_RJMG1BD3B8K1ANRJ2

Similar boards

  • 2 layers85 × 56 mmHB RF ETH, the printed circuit board in 3D

    HB RF ETH

    alexreinert/PCB

    Some of my PCBs

    96 parts104
  • 4 layers110 × 110 mmSmoothiev2-prime, the printed circuit board in 3D

    Smoothiev2-prime

    Smoothieware/Smoothieboard2

    Hardware files for the Smoothieboard v2, and extension boards

    453 parts71
  • 4 layers102.6 × 107.3 mmPro rev1, the printed circuit board in 3D

    Pro rev1

    TheRetroWeb/PicoPOST

    RPi Pico based POST (Power-On Self Test) Diagnostic Card

    136 parts58
  • 4 layers160 × 73.2 mmMainPCB, the printed circuit board in 3D

    MainPCB

    doppelgrau/esp32-f9p-io-board

    An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.

    162 parts39
  • 2 layers40 × 68 mmMULTIGW, the printed circuit board in 3D

    MULTIGW

    nuclearcat/ESP32ETH

    Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible

    32 parts30LGPL-2.1
  • 4 layers85 × 56 mmNano, the printed circuit board in 3D

    Nano

    EnzoRF/nanoberry

    Single-board computer based on i.MX6 ULL

    229 parts21GPL-3.0
  • 2 layers66 × 86 mmRemora, the printed circuit board in 3D

    Remora

    alexthomazo/remora

    Contrôleur fil pilote permettant de contrôler 7 zones et un relai.

    112 parts5

Questions

How big is the Ethernet pmod PCB?

It measures 50.8 × 20.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ethernet pmod use?

26 parts, built around the LAN8720A-CP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ethernet pmod KiCad files?

From the swetland/ethernet-pmod repository on GitHub, at the commit this page was made from: the board is kicad/ethernet-pmod.kicad_pcb and its schematic kicad/ethernet-pmod.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ethernet pmod design in my own project?

Its repository states no licence, so its author keeps all rights: ask swetland before reusing the design.