4 layers70 × 40 mm
S11639-01 SPIboard
drmcnelson/S11639-01-Linear-CCD-PCB-and-Code
PCB and Code (Teensy 4) for the Hamamatsu S11639-01 Linear CCD with 16 bit ADC and SPI interface
61 parts15
2 layers
Piximatrix pmod
sweeneyal/piximatrix- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 35
- Pads
- 128
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Aug 2024
- Updated
- 20 May 2025
Overview
Piximatrix pmod is an open-source printed circuit board by sweeneyal, from the sweeneyal/piximatrix repository on GitHub, published under the MIT licence. It is a 2-layer board with 18 parts on 35 nets.
It is built around the 74LVC1T45GW,125-JSM. Its parts include 14 ICs and 2 connectors.
Main components
1Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 74LVC1T45GW_125 | 74LVC1T45Gw_125:TSSOP6_SOT363-2_NEX | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14 |
| 2 | PMOD-Device-x2-Type-1A-GPIO | pmod-conn_6x2:pmod_pin_array_6x2 | PMOD1, PMOD2 |
| 1 | Conn_01x04 | Connector_Molex:Molex_KK-396_A-41791-0004_1x04_P3.96mm_Vertical | J2 |
| 1 | Conn_02x08_Odd_Even | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J1 |
Similar boards
- 4 layers67.4 × 35.4 mm
- 2 layers53 × 29 mm
Abrd
andijcr/a-kicad-demo-board
quick demo board done to test some of the upcoming Kicad 6 features
17 parts - 4 layers32.5 × 29.3 mm
- 2 layers
- 2 layers27.9 × 16.5 mm
- 2 layers42.7 × 13.7 mm
Stm32-mini12864
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
18 parts1.1kGPL-3.0 - 2 layers41.2 × 46.6 mm
Questions
What parts does the Piximatrix pmod use?
18 parts, built around the 74LVC1T45GW,125-JSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Piximatrix pmod KiCad files?
From the sweeneyal/piximatrix repository on GitHub, at the commit this page was made from: the board is kicad/piximatrix_pmod/piximatrix_pmod.kicad_pcb and its schematic kicad/piximatrix_pmod/piximatrix_pmod.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Piximatrix pmod design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).