

Swallow IO SDRAM
Swallow SDRAM and power measurement board
- Size
- 30 × 140 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 80
- Pads
- 280
- Tracks, vias
- 1,398, 102
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 7 Mar 2016
- Updated
- 7 Mar 2016
Overview
Swallow IO SDRAM is an open-source printed circuit board by swallow-project, from the swallow-project/swallow-board-io-sdram repository on GitHub. It is a 2-layer board of 30 × 140 mm with 50 parts on 80 nets, routed with 1,398 tracks and 102 vias.
It is built around the MAX4378TASD+, AD7266BCP and 74LS574N, with the 74LVC1G00, 74LVC1G02Z and SN74CBTD3306D among its other parts. Its parts include 19 connectors, 12 ICs, 6 capacitors, 2 resistors and 2 diodes.
Main components
6MAX4378TASD+
SOIC-14-40℃~+125℃ 0V~28V 20V/V 2MHz 4 SOIC-14 Current Sense Amplifiers ROHSMaxim Integrated (Analog Devices)Current Sense AmplifiersAD7266BCP
LFCSP-32-VQ(5x5)-40℃~+125℃ 12 1LSB 1MHz~32MHz 2.3mA 2.7V~5.25V 2MHz 3 70dB Built-in External Multiplexers、Simultaneous sampling SAR SPI Yes LFCSP-32-VQ(5x5) Analog to Digital Converters (ADC) ROHSAnalog DevicesAnalog To Digital Converters (ADC)74LS574N
-0ns 0℃~+70℃ 1 2.6mA 20ns 24mA 28ns@5V,45pF 35MHz 4.75V~5.25V 74LS Series 8 D-Type Rising Edge Tri-State - Flip Flops ROHSRochester Electronics, LLCFlip Flops74LVC1G00
SOT-353-40℃~+105℃ 1 1.65V~5.5V 1.7V、2V 2 2.3V、3.8V 32mA 32mA 450mV、550mV 4ns@5.5V,50pF 4uA 700mV、800mV 74LVC Local shutdown mode NAND Gate SOT-353 Logic Gates ROHSWuxi I-core ElecLogic Gates74LVC1G02Z
SOT-553-5-40℃~+125℃ 1 1.65V~5.5V 1.7V~2V 1.7ns@5V,50pF 2 200uA 3.4V~3.8V 32mA 32mA 550mV~800mV 700mV~800mV 74LVC Series NOR Gate SOT-553-5 Logic Gates ROHSDiodes IncorporatedLogic GatesSN74CBTD3306D
SOIC-8-40℃~+85℃ 4.5V~5.5V Single Supply SOIC-8 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, Decoders
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MOUNTING_HOLE | Mounting_Hole-3mm | H1, H2, H3, H4 |
| 2 | 100n | SM0603 | C3, C5 |
| 2 | 10k | R_CAY-16 | U8, U11 |
| 2 | 10u | SM1206 | C4, C6 |
| 2 | 470n | SM0805 | C1, C2 |
| 2 | 74LS574 | SO20L | U3, U6 |
| 2 | DUAL_LED-RG-OLS-136UR_SYG | LED_BiColour-1206 | D1, D2 |
| 2 | MAX4378T | TSSOP14 | U1, U2 |
| 1 | +5V_In | PIN_ARRAY_1 | P15 |
| 1 | 0R | SM0805 | R2 |
| 1 | 0R39 | SM0805 | R1 |
| 1 | 1-bits_1 | PIN_ARRAY_4x1 | P18 |
| 1 | 1-bits_2 | PIN_ARRAY_2X1 | P19 |
| 1 | 2k | YC124-JR | U7 |
| 1 | 74LVC1G00 | SOT353 | U5 |
| 1 | 74LVC1G02 | SOT353 | U9 |
| 1 | A Power | PIN_ARRAY_2X1 | P2 |
| 1 | AD7266 | TQFP32 | U4 |
| 1 | ADC_DOUTA_Bypass | PIN_ARRAY_2X1 | P17 |
| 1 | ADC_DOUTB_Bypass | PIN_ARRAY_2X1 | P16 |
| 1 | CONN_1 | PIN_ARRAY_1 | P11 |
| 1 | Cores_B | PIN_ARRAY_3X1 | P8 |
| 1 | Cores_MB | PIN_ARRAY_2X1 | P7 |
| 1 | Cores_MT | PIN_ARRAY_3X1 | P6 |
| 1 | Cores_T | PIN_ARRAY_2X1 | P1 |
| 1 | DRAM-8MX8X4 | TSSOP-54 | U10 |
| 1 | LOGO | LOGO-Project-word | G*** |
| 1 | LOGO | LOGO-Swallow_bird-0.6 | G*** |
| 1 | LOGO | LOGO-swallow-word | G*** |
| 1 | Power | PIN_ARRAY_2X1 | P4 |
| 1 | Power2 | PIN_ARRAY_2X1 | P12 |
| 1 | SDRAM_Disable | PIN_ARRAY_2X1 | P10 |
| 1 | SN74CBTD3306 | SO8E | U12 |
| 1 | Swallow_RST_N_G | PIN_ARRAY_3X1 | P14 |
| 1 | Swallow_V2_Core2_I/O | pin_array_8x2 | P5 |
| 1 | UoB_Logo | UoB_logo_sm-20 | G*** |
| 1 | VAA_Link | PIN_ARRAY_2X1 | P13 |
| 1 | VIO | PIN_ARRAY_3X1 | P9 |
| 1 | Vdd_Swallow | PIN_ARRAY_2X1 | P3 |
| 1 | u-logo_0.1in-inverted | u-logo_0.1in-inverted | G*** |
Similar boards
- 2 layers100 × 100 mm

- 4 layers72.6 × 170 mm

OpenJBOD RP2040
OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.
129 parts87CERN-OHL-P-2.0 - 2 layers172 × 107.7 mm

- 2 layers

- 2 layers65.6 × 41.4 mm

- 2 layers58.3 × 15 mm

Vape light
sbyd-space/vape-light
An educational DIY kit for converting a disposable vape into a rechargeable flashlight
46 parts4CERN-OHL-P-2.0 - 4 layers170.2 × 92 mm

CM4 JBOD Control Board
ApplePie420/OpenJBOD-CM4
This project is heavily inspired by the work of TheGuyDanish, specifically his OpenJBOD thingamajig.
78 parts3 - 2 layers34.3 × 33.4 mm

Breakout
yyzkevin/PicoPCMCIA-Breakout
The PicoPCMCIA External I/O uses Hirose ST-series connectors, chosen for their compact size and robust locking mechanism.
22 parts3
Questions
How big is the Swallow IO SDRAM PCB?
It measures 30 × 140 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Swallow IO SDRAM use?
50 parts, built around the MAX4378TASD+, AD7266BCP, 74LS574N and 74LVC1G00. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Swallow IO SDRAM KiCad files?
From the swallow-project/swallow-board-io-sdram repository on GitHub, at the commit this page was made from: the board is Swallow_IO_SDRAM.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Swallow IO SDRAM design in my own project?
Its repository states no licence, so its author keeps all rights: ask swallow-project before reusing the design.