2 layers100 × 50 mm
2 layers100 × 100 mm
Simple logic full
Justinius/LogicDemoBoardPCB for simple logic demo
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 20
- Pads
- 98
- Tracks, vias
- 195, 17
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 31 Dec 2019
- Updated
- 1 Jan 2020
Overview
Simple logic full is an open-source printed circuit board by Justinius, from the Justinius/LogicDemoBoard repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 100 × 100 mm with 36 parts on 20 nets, routed with 195 tracks and 17 vias.
It is built around the 74LVC1G00, 74LVC1G02Z and 74LVC1G04Z, with the 74LVC1G08Z, 74LVC1G32Z and 74LVC1G86Z among its other parts. Its parts include 10 resistors, 8 capacitors, 8 diodes, 6 ICs and 3 switches.
Main components
6
74LVC1G00
SOT-353-40℃~+105℃ 1 1.65V~5.5V 1.7V、2V 2 2.3V、3.8V 32mA 32mA 450mV、550mV 4ns@5.5V,50pF 4uA 700mV、800mV 74LVC Local shutdown mode NAND Gate SOT-353 Logic Gates ROHSWuxi I-core ElecLogic Gates
74LVC1G02Z
SOT-553-5-40℃~+125℃ 1 1.65V~5.5V 1.7V~2V 1.7ns@5V,50pF 2 200uA 3.4V~3.8V 32mA 32mA 550mV~800mV 700mV~800mV 74LVC Series NOR Gate SOT-553-5 Logic Gates ROHSDiodes IncorporatedLogic Gates74LVC1G04Z
SOT-553-40℃~+125℃ 1 1 1.65V~5.5V 1.7V~2V 200uA 32mA 32mA 5ns@5V,50pF 700mV~800mV 74LVC SOT-553 Inverters ROHSDiodes IncorporatedInverters74LVC1G08Z
SOT-553-5-40℃~+125℃ 1 1.65V~5.5V 1.7V、2V 2 2.4V、3.8V 32mA 32mA 4ns@5V,50pF 550mV、800mV 700mV、800mV 74LVC Series AND Gate SOT-553-5 Logic Gates ROHSDiodes IncorporatedLogic Gates74LVC1G32Z
SOT-553-5-40℃~+125℃ 1 1.65V~5.5V 1.7V~2V 1.7ns@5V,50pF 32mA 32mA 74LVC Series OR Gate SOT-553-5 Logic Gates ROHSDiodes IncorporatedLogic Gates74LVC1G86Z
SOT-553-5-40℃~+125℃ 1 1.65V~5.5V 1.7V~2V 10uA 2 32mA 32mA 5.5ns@5V,50pF 700mV~800mV 74LVC Series XOR Gate SOT-553-5 Logic Gates ROHSDiodes IncorporatedLogic Gates
README
README.mdLogicDemoBoard
PCB for simple logic demo
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100 | Resistors_SMD:R_0603_HandSoldering | R3, R4, R5, R6, R7, R8, R9, R10 |
| 8 | LED_Small | LEDs:LED_0805_HandSoldering | D1, D2, D3, D4, D5, D6, D7, D8 |
| 6 | .1u | Capacitors_SMD:C_0603_HandSoldering | C3, C4, C5, C6, C7, C8 |
| 2 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C1, C2 |
| 2 | 10k | Resistors_SMD:R_0603_HandSoldering | R1, R2 |
| 2 | SW_Push | Buttons_Switches_SMD:SW_SPST_PTS645 | SW2, SW3 |
| 1 | 2032_3V | Battery_Holders:Keystone_3034_1x20mm-CoinCell | BT1 |
| 1 | 74LVC1G00 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U3 |
| 1 | 74LVC1G02 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U5 |
| 1 | 74LVC1G04 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U1 |
| 1 | 74LVC1G08 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | 74LVC1G32 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U4 |
| 1 | 74LVC1G86 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U6 |
| 1 | SW_SPDT | Buttons_Switches_SMD:SW_SPDT_CK-JS102011SAQN | SW1 |
More from Justinius/LogicDemoBoard
1Similar boards
- 4 layers622.7 × 375.7 mm
- 4 layers116.8 × 59.7 mm
- 2 layers30 × 140 mm
Swallow IO SDRAM
swallow-project/swallow-board-io-sdram
Swallow SDRAM and power measurement board
50 parts - 2 layers98.6 × 49.8 mm
Sch
SL-RU/svelotracker
Device for bicycle. It will show current position, track, speed, compass, direction to the destination or to start. It can save the track and etc
106 parts1 - 4 layers100 × 100 mm
- 2 layers51.4 × 61 mm
- 4 layers152 × 122.5 mm
Controller board
PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.
93 parts2CERN-OHL-S-2.0 - 2 layers88.8 × 76 mm
Questions
How big is the Simple logic full PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Simple logic full use?
36 parts, built around the 74LVC1G00, 74LVC1G02Z, 74LVC1G04Z and 74LVC1G08Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Simple logic full KiCad files?
From the Justinius/LogicDemoBoard repository on GitHub, at the commit this page was made from: the board is Simple_logic_full.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Simple logic full design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).