

Schematic MD
SurugaElec. 2ch MD © 2025 by SurugaElectric is licensed under CC BY-SA 4.0
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 195
- Nets
- 164
- Pads
- 863
- Tracks, vias
- 1,322, 748
- Pours
- 33
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 May 2025
- Updated
- 20 May 2025
Overview
Schematic MD is an open-source printed circuit board by SurugaElectric, from the SurugaElectric/md_pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 100 × 100 mm with 195 parts on 164 nets, routed with 1,322 tracks and 748 vias.
It is built around the UCC21520DW, TPS5430DDA and 74HC04D, with the MAX3051EKA, XC6206P332MR-G and SQJ886EP-T1_GE3 among its other parts. Its parts include 71 resistors, 61 capacitors, 20 diodes, 10 ICs and 10 connectors. It belongs with the STM32 boards of this library.
Main components
6UCC21520DW
SOIC-16-300mil-40℃~+125℃@(Ta) 1.4mA 100kV/us 12ns 16ns 2 33ns 33ns 3V~18V 4A 5700V 6A 9.2V~25V Dead-time control Half-Bridge MOSFET、IGBT SOIC-16-300mil Isolators - Gate Drivers ROHSTexas InstrumentsIsolators - Gate DriversTPS5430DDA
ESOP-8-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters74HC04D
SOP-14-40℃~+125℃ 1 1.5V~4.2V 1.9V、3.7V、5.2V 100mV、400mV、400mV 14ns@6V,50pF 2V~6V 2uA 5.2mA 5.2mA 500mV~1.8V 6 74HC SOIC-14 Inverters ROHSNexperiaInvertersMAX3051EKA
UncategorisedMaxim Integrated ProductsXC6206P332MR-G
UncategorisedUnknown makerSQJ886EP-T1_GE3
SO-8-4-55℃~+175℃ 1 N-channel 184pF 2.5V 2.922nF 356pF 4.5mΩ@10V 40V 55W 60A 65nC@10V N-Channel SO-8-4 MOSFETs ROHSVishay IntertechnologyMOSFETs
README
README.mdSurugaElec. 2ch MD © 2025 by SurugaElectric is licensed under CC BY-SA 4.0
Parts
195| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4, C13, C18, C21, C22, C23, C24, C25, C28, C29, C30, C35, C36, C37 +7 |
| 20 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R3, R5, R6, R10, R11, R12, R13, R14, R25, R26, R64, R65, R66, R67, R68 +4 |
| 15 | D_Schottky | Diode_SMD:D_SOD-123F | D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 |
| 12 | 20k | Resistor_SMD:R_0402_1005Metric | R30, R34, R35, R36, R37, R41, R46, R50, R51, R52, R53, R57 |
| 8 | 10 | Resistor_SMD:R_0805_2012Metric | R32, R33, R38, R39, R48, R49, R54, R55 |
| 8 | 10uF | Capacitor_SMD:C_1210_3225Metric | C31, C32, C33, C34, C45, C46, C47, C48 |
| 8 | 33pF | Capacitor_SMD:C_0402_1005Metric | C26, C27, C38, C39, C40, C41, C52, C53 |
| 8 | 51 | Resistor_SMD:R_0402_1005Metric | R28, R29, R42, R43, R44, R45, R58, R59 |
| 8 | SQJ886EP-T1_GE3 | RDC_footprint:Infineon_PG-TDSON-8_6.15x5.15mm_thermalvia | Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9 |
| 6 | 0 | Resistor_SMD:R_0402_1005Metric | R15, R16, R17, R18, R19, R20 |
| 4 | 0.1 | Resistor_SMD:R_1206_3216Metric | R31, R40, R47, R56 |
| 4 | 330uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C9, C10, C11, C12 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 4 | UCC21520DW | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U4, U5, U6, U7 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric | R4, R70, R71 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6, C57, C58 |
| 2 | 0.01uF | Capacitor_SMD:C_0603_1608Metric | C55, C60 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R23, R24 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C54, C59 |
| 2 | 15uH | Inductor_SMD:L_Sunlord_SWPA5040S | L2, L3 |
| 2 | 18pF | Capacitor_SMD:C_0402_1005Metric | C14, C15 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C16, C17 |
| 2 | 220uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C56, C61 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R21, R22 |
| 2 | CAN_Bus | Connector_JST:JST_XA_S04B-XASK-1_1x04_P2.50mm_Horizontal | J1, J2 |
| 2 | SW_Push | RDC_footprint:TVBP06-B043 | SW3, SW4 |
| 2 | TPS5430DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U8, U10 |
| 2 | XT60 | Connector_AMASS:AMASS_XT60PW-F_1x02_P7.20mm_Horizontal | J9, J10 |
| 1 | 1.2k | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric | R60 |
| 1 | 18k | Resistor_SMD:R_0402_1005Metric | R62 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R63 |
| 1 | 3.9k | Resistor_SMD:R_0402_1005Metric | R61 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | 600@100MHz | Resistor_SMD:R_0805_2012Metric | L1 |
| 1 | 74HC04 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | Conn_02x01 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_02x07_Odd_Even | RDC_footprint:JTAG_box_connector | J5 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | LOGO | RDC_footprint:suruden_logo | G*** |
| 1 | MAX3051 | Package_TO_SOT_SMD:SOT-23-8 | U1 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_Card:microSD_HC_Hirose_DM3D-SF | J4 |
| 1 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | Rotaly_encoder_1 | Connector_JST:JST_XA_S05B-XASK-1_1x05_P2.50mm_Horizontal | J6 |
| 1 | Rotaly_encoder_2 | Connector_JST:JST_XA_S05B-XASK-1_1x05_P2.50mm_Horizontal | J7 |
| 1 | STM32F405RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | SW_DIP_x04 | Button_Switch_SMD:SW_DIP_SPSTx04_Slide_Copal_CHS-04B_W7.62mm_P1.27mm | SW2 |
| 1 | SW_SPDT | RDC_footprint:SS-12D | SW1 |
| 1 | XC6206P332MR-G | Package_TO_SOT_SMD:SOT-23-3 | U9 |
| 1 | XT60 | Connector_AMASS:AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J8 |
The 194 most common of 195 parts.
Questions
How big is the Schematic MD PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Schematic MD use?
195 parts, built around the UCC21520DW, TPS5430DDA, 74HC04D and MAX3051EKA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Schematic MD KiCad files?
From the SurugaElectric/md_pcb repository on GitHub, at the commit this page was made from: the board is schematic_MD.kicad_pcb and its schematic 24-12V_StepDown_DCDC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Schematic MD design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 100 mm

- 4 layers65 × 56 mm

- 2 layers160 × 100 mm

Base
florolf/lab-automation
Plugs into relay and can be used to provide switchable 5V USB power to downstream devices.
83 parts1 - 2 layers100 × 100 mm

- 2 layers100 × 100 mm

Schematic PWR
SurugaElectric/pwr_pcb
SurugaElec. Power supply board © 2025 by SurugaElectric is licensed under CC BY-SA 4.0
127 partsCC-BY-SA-4.0 - 2 layers43.1 × 43.5 mm

- 4 layers231 × 67 mm

- 2 layers94.5 × 228 mm
