2 layers81 × 28.5 mm
4 layers45.1 × 45.1 mm
SuperPower uC KiCad
SuperPower/Artemis2All hardware designs and products you can find in this repository is licensed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal
- Size
- 45.1 × 45.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 99
- Nets
- 65
- Pads
- 290
- Tracks, vias
- 569, 92
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Feb 2021
- Updated
- 6 May 2022
Overview
SuperPower uC KiCad is an open-source printed circuit board by SuperPower, from the SuperPower/Artemis repository on GitHub. It is a 4-layer board of 45.1 × 45.1 mm with 99 parts on 65 nets, routed with 569 tracks and 92 vias.
It is built around the FP6291LR, ME6210A33PG and FS312F-G, with the FS8205A, IP4220CZ6 and PCA9557PW among its other parts. Its parts include 28 capacitors, 25 resistors, 12 ICs, 10 transistors and 6 connectors.
Main components
12
FP6291LR
SOT-23-6-40℃~+85℃ 1 190uA 2.5A 2.6V~6V 800kHz~1.2MHz Adjustable Boost Boost Built-in No Overcurrent Protection、Adjustable current limiting SOT-23-6 DC-DC Converters ROHSTECH PUBLICDC-DC Converters
ME6210A33PG
SOT-89-25℃~+85℃ 1 1.6uA 18V 200mV@(200mA) 3.3V 500mA Fixed Positive Short Circuit Protection SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsFS312F-G
SOT-23-6-40℃~+85℃ 1 2.9V 2V~4.275V 3uA Lithium Battery Not supported Protection IC SOT-23-6 Battery Management ROHSFortune SemiconBattery ManagementFS8205A
SOT-23-6-55℃~+150℃ 1.2V 1.5W 2 N-Channel 20V 31.5mΩ@2.5V 466pF 5.7nC@4.5V 58pF 65pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETsIP4220CZ6
SOT-23-60.3pF 15V 300W@8/20us 5V 80nA ESD IEC 61000-4-5 Unidirectional SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
PCA9557PW
TSSOP-16-40℃~+85℃ 10mA 2.3V~5.5V 250nA 400kHz 8 8 I2C、SMBus No Interrupt Output Open-drain Reset function、Cascading and address extension TSSOP-16 I/O Expanders ROHSNXP SemiconductorsI/O Expanders
PCF8563T/5
SO-8-40℃~+85℃ 0.25uA 1V~5.5V Battery low-voltage detection、Programmable clock output、Alarm function、Countdown timer I2C Yes SO-8 Real Time Clocks ROHSNXP SemiconductorsReal Time Clocks
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
XC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
B5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky Diodes
SKRKAEE020
SMD,3.9x2.9mm-40℃~+85℃ 1.6N 12V 2.9mm 200,000 Cycles 2mm 3.9mm 50mA Round Button SMD(SMT) Tab SPST-NO Surface Mount,Vertical SMD,3.9x2.9mm Tactile Switches ROHSALPSALPINETactile Switches
README
README.mdSuperPower
Here you should find the best power supplies for your low-power projects. Because of different requirements for an Raspberry Pi and micro-controllers like the ESP32 we split the project into two boards, one for the Raspberry Pi (SuperPower-Rpi) and one for micro-controllers (SuperPower-uC) with low power.
SuperPower-Rpi for Raspberry Pi
SuperPower-uC for micro-controllers and low-power devices
Licence
All hardware designs and products you can find in this repository is licensed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal
Relevant links
Parts
99| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 1µF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C10, C11, C12, C13, C21, C22, C23, C27 |
| 10 | 0.1µF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C6, C7, C8, C9, C24, C25, C26, C29 |
| 10 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R9, R13, R14, R15, R23, R24, R25, R26 |
| 7 | 22µF | Capacitor_SMD:C_0805_2012Metric | C15, C16, C17, C18, C19, C20, C28 |
| 6 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q7, Q8, Q11 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R11, R12, R19, R20 |
| 4 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q5, Q6, Q9, Q10 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_ISO7380 | H1, H3, H5, H6 |
| 3 | 180k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R6, R16 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R10 |
| 2 | B5819W | Diode_SMD:D_SOD-123 | D3, D4 |
| 2 | ME6210A33P | Package_TO_SOT_SMD:SOT-89-3 | U11, U12 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 1 | 2.4k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R22 |
| 1 | 24k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R18 |
| 1 | 32.768KHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R21 |
| 1 | 39k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R17 |
| 1 | 6.8µH | Inductor_SMD:L_Bourns_SRP7028A_7.3x6.6mm | L1 |
| 1 | Battery connector | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | CHRG_Jumper | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | External NTC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | FP6291LR | Package_TO_SOT_SMD:SOT-23-6 | U10 |
| 1 | FS312F-G | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | FS8205A | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U2 |
| 1 | IP4220CZ6 | Package_SO:TSOP-6_1.65x3.05mm_P0.95mm | U15 |
| 1 | Jumper 5v enable | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP4 |
| 1 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP6 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP5 |
| 1 | LC709203FQH-01TWG | Package_DFN_QFN:WDFN-8-1EP_4x3mm_P0.65mm_EP2.4x1.8mm | U3 |
| 1 | LC709203FXE | Package_CSP:WLCSP-9_3x3_1.76x1.6mm | U13 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | LOGO | lowcostStack:logo-superpower-Artemis | G*** |
| 1 | PCA9557PW | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U5 |
| 1 | PCF8563T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | RTC bypass | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | SKRKAEE020 | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | Solar in | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J4 |
| 1 | TP4056 | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP4 |
| 1 | Thermistor | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | J2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J3 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23 | U8 |
| 1 | jumper | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP3 |
| 1 | regulator board | Connector_PinSocket_2.54mm:PinSocket_1x13_P2.54mm_Vertical | J8 |
Questions
How big is the SuperPower uC KiCad PCB?
It measures 45.1 × 45.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SuperPower uC KiCad use?
99 parts, built around the FP6291LR, ME6210A33PG, FS312F-G and FS8205A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SuperPower uC KiCad KiCad files?
From the SuperPower/Artemis repository on GitHub, at the commit this page was made from: the board is artemis-board/SuperPower-uC-KiCad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SuperPower uC KiCad design in my own project?
Its repository states no licence, so its author keeps all rights: ask SuperPower before reusing the design.
Similar boards
- 2 layers100 × 100 mm
Mcu
cs2dsb/coffee_assistant
Free and open source software distributed under the terms of both the [MIT License][lm] and the [Apache License 2.0][la].
168 parts10Apache-2.0 - 6 layers83.5 × 56 mm
- 4 layers65 × 100 mm
PGR
Projeto-Guarda-Rios/PCB
O repositório para a PCB do Projeto Guarda Rios! Inclui todos os ficheiros relacionados com a PCB!
188 parts2MIT - 4 layers10.4 × 12.3 mm
Lipo protection board
ikatkov/lipo-protection-board
There are two version, one is single layer and rectangular, the other is double layers, long and narrow.
9 parts - 2 layers39 × 55.8 mm
Battery
RocketScientist26/Quadruped-Hardware
Main, Battery protection and Servo PCBs for Quadruped robot
295 partsMIT - 2 layers112.9 × 49.1 mm
- 2 layers
8-ball badge
tylercrumpton/magic-8-badge
An Open Source CircuitPython-compatible PCB badge that can (maybe) tell the future!
90 parts2