4 layers45.1 × 45.1 mm
SuperPower uC KiCad
SuperPower/Artemis
All hardware designs and products you can find in this repository is licensed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal
99 parts2
2 layers81 × 28.5 mm
SuperPower uC KiCad
enzexu-cloud/BCIT-project- Size
- 81 × 28.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 81
- Nets
- 95
- Pads
- 320
- Tracks, vias
- 1,015, 118
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Jan 2025
- Updated
- 21 May 2025
Overview
SuperPower uC KiCad is an open-source printed circuit board by enzexu-cloud, from the enzexu-cloud/BCIT-project repository on GitHub. It is a 2-layer board of 81 × 28.5 mm with 81 parts on 95 nets, routed with 1,015 tracks and 118 vias.
It is built around the ESP32-WROOM-32U, CH340G and FP6291LR, with the TCA6408APW, ME6210A33PG and AMS1117-3.3 among its other parts. Its parts include 21 capacitors, 17 resistors, 13 ICs, 7 transistors and 6 connectors. It belongs with the ESP32 boards of this library.
Main components
12
ESP32-WROOM-32U
SMD,19.2x18mm-40℃~+85℃ -97dBm 2.4GHz 20.5dBm 3V~3.6V Bluetooth4.2 ESP32-DOWD UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC、CAN SMD,19.2x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
CH340G
SOP-16-40℃~+85℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
FP6291LR
SOT-23-6-40℃~+85℃ 1 190uA 2.5A 2.6V~6V 800kHz~1.2MHz Adjustable Boost Boost Built-in No Overcurrent Protection、Adjustable current limiting SOT-23-6 DC-DC Converters ROHSTECH PUBLICDC-DC Converters
TCA6408APW
TSSOP-16-40℃~+85℃ 1.65V~5.5V 10mA 1uA 2 200mV 25mA 400kHz 4V 8 I2C、SMBus Interrupt Output Push-Pull Reset function、Cascading and address extension、Built-in LED driver、IO level configurable TSSOP-16 I/O Expanders ROHSTexas InstrumentsI/O Expanders
ME6210A33PG
SOT-89-25℃~+85℃ 1 1.6uA 18V 200mV@(200mA) 3.3V 500mA Fixed Positive Short Circuit Protection SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsFS312F-G
SOT-23-6-40℃~+85℃ 1 2.9V 2V~4.275V 3uA Lithium Battery Not supported Protection IC SOT-23-6 Battery Management ROHSFortune SemiconBattery ManagementFS8205A
SOT-23-6-55℃~+150℃ 1.2V 1.5W 2 N-Channel 20V 31.5mΩ@2.5V 466pF 5.7nC@4.5V 58pF 65pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETs
PCF8563T/5
SO-8-40℃~+85℃ 0.25uA 1V~5.5V Battery low-voltage detection、Programmable clock output、Alarm function、Countdown timer I2C Yes SO-8 Real Time Clocks ROHSNXP SemiconductorsReal Time Clocks
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
XC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.md💫 About Me:
Enze Xu (徐恩泽) is a highly adaptable and analytical Mechatronics & Robotics student at BCIT specializing in automation control and embedded systems. After two years of intensive study, he has gained hands-on experience in PLC programming, circuit design, and microcontroller development, he has built a strong foundation in real-time control and system integration. Skilled in embedded C/ Assembly, hardware/software design, and diagnostics, he excels at developing and troubleshooting automation equipment.
He is passionate about contributing his expertise in automation and embedded technology.
🌐 Socials:
💻 Tech Stack:
📊 GitHub Stats:
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1µF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C8, C9, C14, C15, C19, C20 |
| 8 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 7 | 1µF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C5, C10, C11, C12, C13, C21 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R8, R9, R11, R12 |
| 4 | 10µF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4, C16, C17, C18 |
| 4 | 180k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R13, R14, R16 |
| 3 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q7 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R21 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R10 |
| 2 | 22k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R15, R17 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C6, C7 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q5, Q6 |
| 2 | ME6210A33P | Package_TO_SOT_SMD:SOT-89-3_Handsoldering | U11, U12 |
| 2 | S8050 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q3, Q4 |
| 1 | 1.8k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5 |
| 1 | 12MHZ | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7 |
| 1 | 3.3u | Inductor_SMD:L_Bourns_SRP7028A_7.3x6.6mm | L1 |
| 1 | 32.768KHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 3v3_MCU_I2C | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6 |
| 1 | Battery connector | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J1 |
| 1 | CH340G | Package_SO:SOP-16_4.55x10.3mm_P1.27mm | U5 |
| 1 | CHRG_Jumper | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123 | D4 |
| 1 | ESP32-WROOM32 | RF_Module:ESP32-WROOM-32 | U13 |
| 1 | FP6291LR | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U10 |
| 1 | FS312F-G | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U1 |
| 1 | FS8205A | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U2 |
| 1 | LC709203FQH | Package_DFN_QFN:WDFN-8-1EP_4x3mm_P0.65mm_EP2.4x1.8mm | U3 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | MCU_EN | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP3 |
| 1 | PCF8563T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | SM4007 | Diode_SMD:D_MELF | D3 |
| 1 | Solar in | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J4 |
| 1 | TCA6408A | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U9 |
| 1 | TP4056 | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | Thermistor | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | J2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J3 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23_Handsoldering | U8 |
| 1 | main pin header fight | Connector_PinSocket_2.54mm:PinSocket_1x21_P2.54mm_Vertical | J5 |
| 1 | main pin header left | Connector_PinSocket_2.54mm:PinSocket_1x21_P2.54mm_Vertical | J6 |
Questions
How big is the SuperPower uC KiCad PCB?
It measures 81 × 28.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SuperPower uC KiCad use?
81 parts, built around the ESP32-WROOM-32U, CH340G, FP6291LR and TCA6408APW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SuperPower uC KiCad KiCad files?
From the enzexu-cloud/BCIT-project repository on GitHub, at the commit this page was made from: the board is Ski-Lift Monitoring System/SensorsIot SuperPower master SuperPower-uC/lowcost/SuperPower-uC-KiCad.kicad_pcb and its schematic Ski-Lift Monitoring System/Charging Module/Charging Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SuperPower uC KiCad design in my own project?
Its repository states no licence, so its author keeps all rights: ask enzexu-cloud before reusing the design.
Similar boards
- 4 layers60 × 40 mm
Ftx
SETIatHCRO/Front-Page
Documentation related to the Allen Telescope Array at the Hat Creek Radio Observatory Wiki Link Below
153 parts5 - 6 layers122.6 × 75.9 mm
- 4 layers60 × 40 mm
- 4 layers65 × 100 mm
PGR
Projeto-Guarda-Rios/PCB
O repositório para a PCB do Projeto Guarda Rios! Inclui todos os ficheiros relacionados com a PCB!
188 parts2MIT - 4 layers10.4 × 12.3 mm
Lipo protection board
ikatkov/lipo-protection-board
There are two version, one is single layer and rectangular, the other is double layers, long and narrow.
9 parts - 2 layers39 × 55.8 mm
Battery
RocketScientist26/Quadruped-Hardware
Main, Battery protection and Servo PCBs for Quadruped robot
295 partsMIT - 2 layers112.9 × 49.1 mm
