4 layers77.7 × 41 mm
2 layers136 × 104.8 mm
Fcp control pcb
supermileage/fcp-control-pcb- Size
- 136 × 104.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 98
- Nets
- 123
- Pads
- 510
- Tracks, vias
- 963, 161
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Dec 2022
- Updated
- 19 Mar 2023
Overview
Fcp control pcb is an open-source printed circuit board by supermileage, from the supermileage/fcp-control-pcb repository on GitHub. It is a 2-layer board of 136 × 104.8 mm with 98 parts on 123 nets, routed with 963 tracks and 161 vias.
It is built around the ADC1283IPT, L01Z050S05 and ZXGD3003E6, with the AS78L05RTR-G1, LM311DRG and AONR21321 among its other parts. Its parts include 17 connectors, 16 capacitors, 11 ICs, 9 resistors and 7 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6
ADC1283IPT
TSSOP-16-40℃~+125℃ 1.2LSB 12 2.7V~5.5V 50kHz 640uA 73dB 8 800kHz~3.2MHz Built-in External Multiplexers、Synchronous triggering No Not supported SAR SPI TSSOP-16 Analog to Digital Converters (ADC) ROHSSTMicroelectronicsUncategorisedL01Z050S05
--10℃~+80℃ 50A 5V - Current Sensors ROHSTamura CorporationCurrent Sensors
ZXGD3003E6
SOT23-640V, 5A, Gate DriverDiodes IncorporatedUncategorised
AS78L05RTR-G1
SOT-89-40℃~+125℃@(Tj) 1 1.8V@(100mA) 100mA 30V 3mA 40uV 5V 62dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal Shutdown Positive SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedDropout Regulators(LDO)
LM311DRG
SOP-80℃~+70℃ 1 1.7nA 1.7nA 2.4mA 200ns 2mV 36V 5V~30V TTL、CMOS ±15V SOP-8 Comparators ROHSHANSCHIP semiconductorComparators
AONR21321
DFN-8(3x3)-55℃~+150℃ 1 P-Channel 1.18nF 1.3V 155pF 16.5mΩ@10V 24A 30V 34nC@10V DFN-8(3x3) MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.mdfcp-control-pcb
Parts
98| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1k | Package_SO:SOIC-16_4.55x10.3mm_P1.27mm | RN5, RN6, RN7, RN8 |
| 4 | 3.3k | Package_SO:SOIC-16_4.55x10.3mm_P1.27mm | RN1, RN2, RN3, RN4 |
| 4 | ADC1283 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U7, U8, U9, U10 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C14, C16 |
| 3 | 1.5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R9 |
| 3 | 10 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C7, C10 |
| 3 | Conn_01x10_Male | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_10-G-3.5_1x10_P3.50mm_Vertical | J13, J14, J15 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D7, D8, D9 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 3 | Q_NMOS_GDS | Package_TO_SOT_SMD:SOT-89-3_Handsoldering | Q2, Q3, Q4 |
| 2 | 0.1 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C12 |
| 2 | 0.33uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C15 |
| 2 | 1 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 15 pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C11 |
| 2 | 200 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R5 |
| 2 | 560 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R6 |
| 2 | AS78L05RTR-G1 | Package_TO_SOT_SMD:SOT-89-3_Handsoldering | U4, U6 |
| 2 | Conn_01x15_Female | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J1, J2 |
| 2 | D | Diode_SMD:D_PowerDI-5 | D3, D4 |
| 2 | IF E97 | custom:IF-E97 | D5, D6 |
| 2 | R_Potentiometer | custom:TRIM_3361P-1-203GLF | RV1, RV2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 47 uH | Inductor_SMD:L_Coilcraft_LPS4018 | L1 |
| 1 | AONR21321 | custom:TRANS_AONR21321 | Q1 |
| 1 | AnalogPower | Connector_Molex:Molex_Mini-Fit_Jr_5569-02A2_2x01_P4.20mm_Horizontal | J17 |
| 1 | ArduinoVCCPower | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Arduino_Nano_Every | Module:Arduino_Nano | A1 |
| 1 | BPump | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | TP15 |
| 1 | BigPump | Connector_Molex:Molex_Mini-Fit_Jr_5569-02A2_2x01_P4.20mm_Horizontal | J11 |
| 1 | CAPACITOR | custom:VP0265540000G | J3 |
| 1 | CHARGER | Connector_Molex:Molex_Mini-Fit_Jr_5569-02A2_2x01_P4.20mm_Horizontal | J7 |
| 1 | COMP+ | TestPoint:TestPoint_Pad_4.0x4.0mm | TP10 |
| 1 | COMP- | TestPoint:TestPoint_Pad_4.0x4.0mm | TP9 |
| 1 | COMP_OUT | TestPoint:TestPoint_Pad_4.0x4.0mm | TP11 |
| 1 | Current_Mode | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | DISCHARGER | Connector_Molex:Molex_Mini-Fit_Jr_5569-02A2_2x01_P4.20mm_Horizontal | J6 |
| 1 | ExtraAnalogs | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J16 |
| 1 | FUELCELL | custom:VP0265540000G | J4 |
| 1 | Fuse | custom:3586KTR | F1 |
| 1 | GND | TestPoint:TestPoint_Pad_4.0x4.0mm | TP17 |
| 1 | I_FC | TestPoint:TestPoint_Pad_4.0x4.0mm | TP4 |
| 1 | I_MOTOR | TestPoint:TestPoint_Pad_4.0x4.0mm | TP5 |
| 1 | L01Z050S05 | custom:L01Z050S05 | IC1 |
| 1 | LM311DR | custom:SOIC127P599X175-8N | U2 |
| 1 | LPump | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | TP14 |
| 1 | LimiterBypass | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | LittlePump | Connector_Molex:Molex_Mini-Fit_Jr_5569-02A2_2x01_P4.20mm_Horizontal | J10 |
| 1 | MAX15462AB | Package_DFN_QFN:TDFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.2mm | U1 |
| 1 | OUT0 | Connector_Molex:Molex_Mini-Fit_Jr_5569-02A2_2x01_P4.20mm_Horizontal | J12 |
| 1 | OUT0 | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | TP16 |
| 1 | SAFETY_TX | TestPoint:TestPoint_Pad_4.0x4.0mm | TP7 |
| 1 | TLI4971-A050T5-U-E0001 | Package_SON:Infineon_PG-TISON-8-5 | U3 |
| 1 | TLMTR_TX | TestPoint:TestPoint_Pad_4.0x4.0mm | TP8 |
| 1 | VCC | TestPoint:TestPoint_Pad_4.0x4.0mm | TP3 |
| 1 | V_CAP | TestPoint:TestPoint_Pad_4.0x4.0mm | TP13 |
| 1 | V_FC | TestPoint:TestPoint_Pad_4.0x4.0mm | TP12 |
| 1 | ZXGD3003E6 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
Similar boards
- 2 layers70.1 × 74.8 mm
- 4 layers86.9 × 91.9 mm
- 4 layers43 × 61 mm
Accelerometer controller
Miqeo/Vibration_sensor_node
Self contained accelerometer and gyroscope sensor accessible wirelessly and able to capture the data.
63 partsCC0-1.0 - 4 layers100 × 65 mm
- 4 layers100 × 100 mm
CM4IOv5
NBence0/JedlikBots
Welcome to the official GitHub page of JedlikBots! 🎓🤖 We are the dedicated team of software development and robotics students from the Jedlik Ányos Technical School in Győr, Hungary.
226 parts - 6 layers149.4 × 124.8 mm
Low noise power probe panel
blinken/power-rail-probe
Low-noise oscilloscope power rail probe
245 parts101 - 2 layers81.1 × 45.3 mm
Questions
How big is the Fcp control pcb PCB?
It measures 136 × 104.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fcp control pcb use?
98 parts, built around the ADC1283IPT, L01Z050S05, ZXGD3003E6 and AS78L05RTR-G1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fcp control pcb KiCad files?
From the supermileage/fcp-control-pcb repository on GitHub, at the commit this page was made from: the board is fcp-control-pcb/fcp-control-pcb.kicad_pcb and its schematic fcp-control-pcb/current_sensing.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fcp control pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask supermileage before reusing the design.