
Iasis
hydazz/iasis
An optional Raspberry Pi Compute Module 5 carrier for Iasis. It plugs into the main board's HubPD population and carries Ethernet, NVMe storage, an accessory USB-C port and a service USB-C port.

Kicad files for the urban steering PCB
UrbanSteering is an open-source printed circuit board by supermileage, from the supermileage/UrbanSteeringPCB repository on GitHub. It is a 2-layer board of 144 × 100 mm with 50 parts on 67 nets, routed with 678 tracks and 135 vias.
It is built around the MCP2562-H/P, 74HC595PW and 74HC597D. Its parts include 17 resistors, 7 connectors, 6 switches, 3 capacitors and 3 ICs. It belongs with the STM32 boards of this library.

The steering wheel for the UBC Supermileage Urban Concept electric vehicle is designed to steer the vehicle, provide information to the driver, and allow the driver to control the vehicle. This repo contains the design files for the printed circuit board at the core of the steering wheel.
Some features of this PCB:





Found on Notion
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R14, R15, R16, R17 |
| 6 | 68 | Resistor_SMD:R_0805_2012Metric | R6, R7, R9, R10, R11, R12 |
| 6 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 12v | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP4 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 3v3 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP3 |
| 1 | 5v | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP5 |
| 1 | 74HC595PW | Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm | U2 |
| 1 | 74HC597D | Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm | U3 |
| 1 | CAN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | TP1 |
| 1 | CAN_term | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Fuse | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP6 |
| 1 | HAZARDS | LP11EE1NCSYG:LP11EE1NCSYG | S6 |
| 1 | HORN | LP11EE1NCSYG:LP11OA1TCSYY | S1 |
| 1 | INDICATORS | M2013TXG13DA:M2013TXG13DA | S2 |
| 1 | Joystick | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | LIGHTS | LP11EE1NCSYG:LP11EE1NCSYG | S5 |
| 1 | LOGO | Supermileage_PCB:Logo_bitmap | SUPERMILEAGE |
| 1 | MCP2562 | footprints:MCP2562FD-H&slash_P | U1 |
| 1 | Main_conn | Connector_Molex:705510007 | J2 |
| 1 | Proxim | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP2 |
| 1 | Proximity_sensor | Connector_Molex:705510003 | J9 |
| 1 | RUN/STOP | LP11EE1NCSYG:LP11EE1NCSYG | S3 |
| 1 | STM32L432 | schematic:STM32L432 | J4 |
| 1 | Screen_Left | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J5 |
| 1 | Screen_Right | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | WIPERS | LP11EE1NCSYG:LP11EE1NCSYG | S4 |

hydazz/iasis
An optional Raspberry Pi Compute Module 5 carrier for Iasis. It plugs into the main board's HubPD population and carries Ethernet, NVMe storage, an accessory USB-C port and a service USB-C port.

Keitark/fc-rom-vomitter
Wi-Fi NROM development cartridge for Famicom: ESP32-S3, SRAM, KiCad, firmware, fabrication evidence, and an experimental NES variant.

robinolejnik/bosch-kf163-control
Replacement PLL PCB for Bosch KF83/KF163/KF453 radios

alpyen/zynq-gbcartreader
Embedded Software Development project to read & write GameBoy cartridges.




It measures 144 × 100 mm and has 2 copper layers, 1.6 mm thick.
50 parts, built around the MCP2562-H/P, 74HC595PW and 74HC597D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the supermileage/UrbanSteeringPCB repository on GitHub, at the commit this page was made from: the board is UrbanSteering.kicad_pcb and its schematic UrbanSteering.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask supermileage before reusing the design.