

SafetyPCB
FCP Safety Board
- Size
- 63.5 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 85
- Nets
- 73
- Pads
- 282
- Tracks, vias
- 570, 36
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Mar 2022
- Updated
- 26 Sep 2023
Overview
SafetyPCB is an open-source printed circuit board by supermileage, from the supermileage/FCP_Safety_Board repository on GitHub. It is a 2-layer board of 63.5 × 63.5 mm with 85 parts on 73 nets, routed with 570 tracks and 36 vias.
It is built around the ATMEGA328P-AU, CH340C and LTST-C191TBKT-5A, with the ECS-160-18-5PX-CKM-TR among its other parts. Its parts include 20 resistors, 18 capacitors, 13 connectors, 12 diodes and 8 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersLTST-C191TBKT-5A
0603-20℃~+80℃ 120mW 130° 15mcd 2.8V 468nm 470nm~475nm 5mA Blue Discrete Diode Water Clear 0603 LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteECS-160-18-5PX-CKM-TR
HC-49S-SMD-20℃~+70℃ 16MHz 18pF 40Ω ±10ppm ±10ppm HC-49S-SMD Crystals ROHSECSCrystals
Parts
85| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C1, C2, C3, C4, C5, C6, C7, C8, C10, C11, C13, C14, C15, C16, C17 +1 |
| 8 | ~ | 1719750002:MOLEX_1719750002 | J1, J1, J2, J2, J4, J4, J5, J5 |
| 8 | ~ | Resistor_SMD:R_0603_1608Metric | R1, R1, R2, R2, R3, R3, R4, R4 |
| 8 | ~ | SOT95P237X111-3N:SOT95P237X111-3N | Q1, Q1, Q2, Q2, Q3, Q3, Q4, Q4 |
| 7 | RC0603DR-07270KL | Resistor_SMD:R_0603_1608Metric | R7, R8, R9, R10, R11, R12, R13 |
| 7 | ~ | S1M:DIOM4325X250N_Safety | D1, D1, D2, D2, D3, D4, D4 |
| 3 | LTST-C191TBKT-5A | LED_SMD:LED_0201_0603Metric | LED3, LED4, LED5 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 2 | 5-1437565-0 | 5-1437565-0:SW_5-1437565-0 | S1, S2 |
| 2 | ~ | footprints:1422037-2 | K1, K2 |
| 2 | ~ | 0154010:FUSE_0154010.DRL | F1, F1 |
| 2 | ~ | LM1117IMPX-5:SOT230P700X180-4N | U1, U1 |
| 2 | ~ | Connector_Molex:Molex_Micro-Fit_3.0_43045-0200_2x01_P3.00mm_Horizontal | J3, J3 |
| 1 | 1.2K | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | 1.5K | Resistor_SMD:R_0805_2012Metric | R18 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C12 |
| 1 | 1719750003 | 1719750003:MOLEX_1719750003 | J7 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F2 |
| 1 | 560 Ohms | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | ATMEGA328P-AU | ATMEGA328P-AU:QFP80P900X900X120-32N | IC1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | ECS-160-18-5PX-CKM-TR | ECS-160-18-5PX-CKM-TR:XTAL_ECS-160-18-5PX-CKM-TR | Y1 |
| 1 | Header 3X2 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | P2 |
| 1 | IF-D96F | IFE91A:OPTO-RECEIVER | U$1 |
| 1 | NetTie10 | Safety.PcbLib:NetTie | NT1 |
| 1 | USB | Connector_USB:USB_Micro-B_Molex_47346-0001 | J6 |
| 1 | green | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | orange | LED_SMD:LED_0805_2012Metric | D6 |
More from supermileage/FCP_Safety_Board
2- 2 layers64.2 × 63.5 mm

- 2 layers63.5 × 63.5 mm

Similar boards
- 2 layers169.9 × 190.9 mm

- 2 layers75 × 66 mm

- 2 layers150 × 150 mm

BoardGame
jkordek1/Man-Don-t-Get-Angry-Board-game
"Man don't get mad" - electronic board game
218 parts5 - 2 layers68.9 × 23 mm

- 2 layers110 × 100 mm

Jbc miniregler
KarlZeilhofer/htl-loetregler-mini
Einfacher Regler für JBC Lötspitzen der Serie T210, T245 und T470, Weller RT-Spitzen und TS100-Spitzen sollten auch funktionieren.
180 parts2MIT - 2 layers80 × 29.5 mm

- 2 layers98.4 × 99.5 mm

Arduino usb c
wszeto9/2_679_PCB
PCB Project for 2.679 which is then used in my 2.007 Competition Robot
161 parts1 - 4 layers62 × 60.8 mm

Pcbcax
7bwiiza/Robot-creation
Uni project of a 3D model of a 5dof robot using Solidedge and motor control using KiCAD and MATLAB
58 parts
Questions
How big is the SafetyPCB PCB?
It measures 63.5 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SafetyPCB use?
85 parts, built around the ATMEGA328P-AU, CH340C, LTST-C191TBKT-5A and ECS-160-18-5PX-CKM-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SafetyPCB KiCad files?
From the supermileage/FCP_Safety_Board repository on GitHub, at the commit this page was made from: the board is drafts_from_2022-2023/SafetyPCB/SafetyPCBV2/SafetyPCB.kicad_pcb and its schematic drafts_from_2022-2023/SafetyPCB/BabySheet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SafetyPCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask supermileage before reusing the design.