2 layers65 × 56.5 mm
SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
122 parts600
2 layers0.5 × 24.1 mm
it is a pcb badge with 20 programable leds use kicad to acces the pcb files
- Size
- 0.5 × 24.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 8
- Pads
- 62
- Tracks, vias
- 321, 62
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 Jun 2018
- Updated
- 26 Sep 2019
Overview
Badge is an open-source printed circuit board by superhasduper, from the superhasduper/PCB-badge repository on GitHub, published under the MIT licence. It is a 2-layer board of 0.5 × 24.1 mm with 27 parts on 8 nets, routed with 321 tracks and 62 vias.
It is built around the ATTINY85-20SU. Its parts include 20 diodes, 1 capacitor, 1 IC, 1 connector and 1 switch. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdPCB-badge
it is a pcb badge with 20 programable leds use kicad to access the pcb files
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | LED | LEDs:LED_1206_HandSoldering | D1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4 |
| 1 | ATTINY85-20SU | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | AVR-ISP-6 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | CON1 |
| 1 | Battery_Cell | Battery_Holders:Keystone_3000_1x12mm-CoinCell | BT1 |
| 1 | CP | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | LOGO | badge:logo robot | G*** |
| 1 | SW_Push | Buttons_Switches_SMD:SW_SPST_FSMSM | SW1 |
The 26 most common of 27 parts.
Questions
How big is the Badge PCB?
It measures 0.5 × 24.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Badge use?
27 parts, built around the ATTINY85-20SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Badge KiCad files?
From the superhasduper/PCB-badge repository on GitHub, at the commit this page was made from: the board is badge/badge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Badge design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers18.8 × 8.1 mm
Dell charger emulator
KivApple/dell-charger-emulator
Emulator of original Dell charger using ATTINY85
6 parts154 - 2 layers14 × 17.3 mm
- 2 layers43.9 × 29 mm
C64Saver2-addon
bwack/C64-Saver-bwack
C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.
43 parts124 - 2 layers61 × 36.8 mm
- 2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers134.3 × 140 mm
- 2 layers50 × 25 mm
LoRa Environmental Sensors
spielhuus/LoRa-Environmental-Sensors
ATtiny85 based LoRa atmospheric sensor board with BME280
5 parts28