sullyjason/interactiles1Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.
Interactiles Module Neopixel is an open-source printed circuit board by sullyjason, from the sullyjason/interactiles repository on GitHub. It is a 2-layer board of 134.8 × 82.4 mm with 30 parts on 35 nets, routed with 348 tracks and 10 vias.
Its parts include 4 connectors, 1 resistor, 1 diode and 1 switch. It belongs with the lEDs and displays and home automation and IoT boards and the ESP32 boards of this library.
3×5 grid of TL1 NeoPixel switches (7.5mm² each). 4-layer board with MCP23017 I/O expander mounted directly on the underside. Pinout is non-obvious due to space constraints — refer to schematic.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | PLB_RGB_SW | SilvansFootprintLibrary:PLB-N1PRGB-GTW-AI | RGB_SW1, RGB_SW2, RGB_SW3, RGB_SW4, RGB_SW5, RGB_SW6, RGB_SW7, RGB_SW8, RGB_SW9, RGB_SW10, RGB_SW11, RGB_SW12, RGB_SW13, RGB_SW14, RGB_SW15 |
| 8 | MountingHole_M3 | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4, H5, H6, H7, H8 |
| 1 | 330ohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | PINHD_1x15_Male | Connector_FFC-FPC:TE_1-84952-6_1x16-1MP_P1.0mm_Horizontal | J3 |
| 1 | PINHD_1x15_Male | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J2 |
| 1 | PINHD_1x2_Female | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | SW_SPST | Button Switch SMD:SW_DPDT_CK_JS202011JCQN | SW1 |
| 1 | Screw_Terminal_2_P3.50mm | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J1 |
It measures 134.8 × 82.4 mm and has 2 copper layers, 1.6 mm thick.
30 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sullyjason/interactiles repository on GitHub, at the commit this page was made from: the board is Button_Modules/Large/Module_Large/Interactiles_Module_Neopixel.kicad_pcb and its schematic 2x2 Interactiles/PCB/Controller PCB/RGB 2x2 with WS2811.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sullyjason before reusing the design.
sullyjason/interactiles
Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.
sullyjason/interactiles
Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.
sullyjason/interactiles
Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.
sullyjason/interactiles
Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.
sullyjason/interactiles
Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.
sullyjason/interactiles
Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.
sullyjason/interactiles
Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.
sullyjason/interactiles
Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
