2 layers32 × 28 mm
2 layers
HC32F005C6UA QMI8658
sullivan986/sullivan_hardware1Project for hardware design.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 44
- Pads
- 147
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 3 Sep 2026
- Updated
- 6 Nov 2026
Overview
HC32F005C6UA QMI8658 is an open-source printed circuit board by sullivan986, from the sullivan986/sullivan_hardware repository on GitHub, published under the MIT licence. It is a 2-layer board with 31 parts on 44 nets.
It is built around the CH343P, WAFER-GH1.25-4PWB and WAFER-GH1.25-2PWB. Its parts include 15 capacitors, 7 resistors, 5 ICs, 2 switches and 1 connector.
Main components
3
CH343P
TQFN-16-EP(3x3)-40℃~+85℃ 3.3V、5V 3mA 6Mbps 90uA USB 2.0 USB to UART TQFN-16-EP(3x3) USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
WAFER-GH1.25-4PWB
SMD,P=1.25mm,卧贴-25℃~+85℃ 1 1.25mm 125V 1A 1x4P 4 4.35mm 4P 5mm 8.25mm Auxiliary Solder Pin Beige Brass GH LCP Surface Mount, Right Angle Tin SMD,P=1.25mm,卧贴 Wire To Board Connector ROHSXUNPUWire To Board Connector
WAFER-GH1.25-2PWB
SMD,P=1.25mm,卧贴-25℃~+85℃ 1 1.25mm 125V 1A 1x2P 2 2P 4.35mm 5.75mm 5mm Auxiliary Solder Pin Beige Brass GH LCP Surface Mount, Right Angle Tin SMD,P=1.25mm,卧贴 Wire To Board Connector ROHSXUNPUWire To Board Connector
README
README.mdsullivan_hardware
Some open-source hardware designed by Kicad.
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Library:C_0402_1005Metric | C3, C5, C9, C11, C12, C13, C15, C16, C17 |
| 3 | 10k | Library:R_0402_1005Metric | R3, R6, R7 |
| 3 | 1u | Library:C_0402_1005Metric | C6, C7, C8 |
| 3 | 5.1k | Library:R_0402_1005Metric | R1, R2, R4 |
| 2 | 4.7u | Library:C_0402_1005Metric | C10, C14 |
| 2 | BTN | Library:SW-SMD_2P-TS24CA | SW1, SW2 |
| 1 | 10u | Library:C_0402_1005Metric | C4 |
| 1 | 1k | Library:R_0402_1005Metric | R5 |
| 1 | CH343P | Library:WCH_QFN-16-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U4 |
| 1 | HC32F005C6UA | Library:QFN-20_L3.0-W3.0-P0.40-BL-EP1.7 | U1 |
| 1 | QMI8658B_C5380158 | Library:LGA-14_L3.0-W2.5-P0.50-TL | U2 |
| 1 | TLV75733PDRVR | Library:TDFN-6_L2.0-W2.0-P0.65-TL-EP | U3 |
| 1 | TYPE-C 16PIN 2MD(073) | Library:USB-C-SMD_TYPE-C-16PIN-2MD-073 | USB2 |
| 1 | WAFER-GH1.25-2PWB | Library:CONN-TH_2P-P1.25_XUNPU_WAFER-GH1.25-2PWB | CN1 |
| 1 | WAFER-GH1.25-4PWB | Library:CONN-SMD_4P-P1.25_XUNPU_WAFER-GH1.25-4PWB | U5 |
More from sullivan986/sullivan_hardware
1Similar boards
- 4 layers85 × 113 mm
- 4 layers
MotorCAN
chairlesengi/MotorCAN
CANBus based FOC motor driver board designed for drone gimbal motors
68 partsMIT - 2 layers34 × 46 mm
- 2 layers312.5 × 122.3 mm
- 2 layers148.6 × 192.2 mm
Badge
NuttyShell/NuttyBadge
NuttyBadge: A NuttyShell crafted multi-tool. Opensourced Hardawre and Software
169 parts31GPL-3.0 - 4 layers39 × 40.5 mm
WirelessJLink V3S
hkustenterprize/RM2025-Wireless-JLink
Wireless JLink-OB based on Allwinner V3S
147 parts30GPL-3.0 - 6 layers100 × 120 mm
Astra piNas
jlcjak/astra_piNas
Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.
176 parts30 - 2 layers87.4 × 20.3 mm
UINIO MCU ESP32S3
uinika/UINIO-MCU-ESP32S3
the Evaluation Board base on ESP32-S3 with Xtensa® Dual-Core 32-bit LX7.
48 parts13
Questions
What parts does the HC32F005C6UA QMI8658 use?
31 parts, built around the CH343P, WAFER-GH1.25-4PWB and WAFER-GH1.25-2PWB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HC32F005C6UA QMI8658 KiCad files?
From the sullivan986/sullivan_hardware repository on GitHub, at the commit this page was made from: the board is main_controller/HC32F005C6UA_QMI8658/HC32F005C6UA_QMI8658.kicad_pcb and its schematic main_controller/HC32F005C6UA_QMI8658/HC32F005C6UA_QMI8658.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HC32F005C6UA QMI8658 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).