

STM32F103C8T6
- Size
- 39 × 32.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 50
- Pads
- 130
- Tracks, vias
- 198, 26
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Jul 2026
- Updated
- 30 Jul 2026
Overview
STM32F103C8T6 is an open-source printed circuit board by sukanraj51, from the sukanraj51/STM32F103C8TX-PCB-Design repository on GitHub. It is a 2-layer board of 39 × 32.5 mm with 31 parts on 50 nets, routed with 198 tracks and 26 vias.
It is built around the AMS1117-3.3. Its parts include 12 capacitors, 5 resistors, 4 connectors, 2 ICs and 1 diode. It belongs with the STM32 boards of this library.
Main components
1Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nf | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C8 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J3, J4 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | 1K5 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 1uf | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C11, C12 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 10uf | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 16Hz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1K5 | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 1k5 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | BOOT |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J1 |
Similar boards
- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

- 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the STM32F103C8T6 PCB?
It measures 39 × 32.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the STM32F103C8T6 use?
31 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32F103C8T6 KiCad files?
From the sukanraj51/STM32F103C8TX-PCB-Design repository on GitHub, at the commit this page was made from: the board is STM32F103C8T6.kicad_pcb and its schematic STM32F103C8T6.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32F103C8T6 design in my own project?
Its repository states no licence, so its author keeps all rights: ask sukanraj51 before reusing the design.