
Boost converter V1
anurag5197/KiCad-PCB-Projects
A collection of PCB designs created in KiCad as part of my electronics engineering coursework and self-learning.

Boost Converter V1 is a DC–DC step-up power converter designed to increase a lower input voltage to a higher regulated output voltage. This project focuses on practical power electronics design, component selection, and PCB layout using industry-standard tools.
Boost Converter V1 is an open-source printed circuit board by sujitkumar05-pcb, from the sujitkumar05-pcb/Boost-Converter-V1 repository on GitHub. It is a 2-layer board of 47 × 24.4 mm with 15 parts on 6 nets, routed with 50 tracks and 3 vias.
It is built around the XL6009 and SS34. Its parts include 4 capacitors, 4 connectors, 1 resistor, 1 diode and 1 inductor. It belongs with the power boards of this library.
Step-up (Boost) DC–DC converter topology Compact and optimized PCB layout Designed with reliability and efficiency in mind Suitable for low-voltage to high-voltage applications Versioned design (V1 – initial stable release)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1, J2, J3, J4 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 1 | 1K | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 220uF /50V | Capacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mm | C4 |
| 1 | 33uH | Inductor_SMD:L_12x12mm_H8mm | L1 |
| 1 | 47uF /50V | Capacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mm | C1 |
| 1 | 50K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | SS34 | Diode_SMD:D_SMA | D1 |
| 1 | XL6009 | XL6009:DPAK170P1435X465-6N | VR1 |
The 13 most common of 15 parts.

anurag5197/KiCad-PCB-Projects
A collection of PCB designs created in KiCad as part of my electronics engineering coursework and self-learning.

Hirusha785/DC-DC-Boost-Converter-PCB
⚡ A compact DC-DC boost converter PCB designed in KiCad using the XL6009 regulator. Includes schematic, PCB layout, and 3D model for power electronics learning and prototyping. 🔧

hiteshpanigrahi/XL6009-Boost-Converter
This is a custom-designed DC-DC boost converter PCB built around the XL6009 switching regulator IC. It’s capable of efficiently stepping up voltage from as low as 5V up to 32V, delivering up to 4A of output current with…

kumaritanya939-create/DC-DC-Boost-Converter
Designed and developed a DC-DC Boost Converter PCB to efficiently step up low input voltage to a higher regulated output voltage.
NBER08/StartrackerOrion-Hardware
A repo on my project of making a DIY startracker for my astrophotography desires.

Noraiz963/Boost-Converter-
A DC-DC boost converter designed in KiCad, built around the XL6009 adjustable boost converter IC steps up a lower input DC voltage to a higher, adjustable output voltage.


VikramR3/Boost_Converter_V1
XL6009 adjustable DC-DC step-up converter. Designed in KiCad 9.
It measures 47 × 24.4 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the XL6009 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sujitkumar05-pcb/Boost-Converter-V1 repository on GitHub, at the commit this page was made from: the board is Boost Converter V1.kicad_pcb and its schematic Boost Converter V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask sujitkumar05-pcb before reusing the design.