
Boost converter V1
anurag5197/KiCad-PCB-Projects
A collection of PCB designs created in KiCad as part of my electronics engineering coursework and self-learning.

XL6009 adjustable DC-DC step-up converter. Designed in KiCad 9.
Boost Converter V1 is an open-source printed circuit board by VikramR3, from the VikramR3/Boost_Converter_V1 repository on GitHub, published under the MIT licence. It is a 2-layer board of 50.2 × 21.7 mm with 13 parts on 6 nets, routed with 57 tracks and 3 vias.
It is built around the XL6009 and SS34. Its parts include 4 capacitors, 4 connectors, 1 resistor, 1 IC and 1 diode. It belongs with the power boards of this library.
A 2-layer PCB that steps a low DC input up to a higher adjustable output using an XL6009 switching regulator: a 33 µH inductor and SS34 Schottky do the switching, and a 50 kΩ trimmer sets the feedback divider so the output voltage is dialled in by hand. Designed in KiCad 9.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1, J2, J3, J4 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 220uF/50V | Capacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mm | C4 |
| 1 | 33uH | Inductor_SMD:L_12x12mm_H8mm | L1 |
| 1 | 47uF/50V | Capacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mm | C1 |
| 1 | 50k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | SS34 | Diode_SMD:D_SMA | D1 |
| 1 | XL6009 | easyeda2kicad:TO-263-5_L10.2-W8.6-P1.70-LS14.4-TL | U1 |

anurag5197/KiCad-PCB-Projects
A collection of PCB designs created in KiCad as part of my electronics engineering coursework and self-learning.

Hirusha785/DC-DC-Boost-Converter-PCB
⚡ A compact DC-DC boost converter PCB designed in KiCad using the XL6009 regulator. Includes schematic, PCB layout, and 3D model for power electronics learning and prototyping. 🔧

hiteshpanigrahi/XL6009-Boost-Converter
This is a custom-designed DC-DC boost converter PCB built around the XL6009 switching regulator IC. It’s capable of efficiently stepping up voltage from as low as 5V up to 32V, delivering up to 4A of output current with…

kumaritanya939-create/DC-DC-Boost-Converter
Designed and developed a DC-DC Boost Converter PCB to efficiently step up low input voltage to a higher regulated output voltage.
NBER08/StartrackerOrion-Hardware
A repo on my project of making a DIY startracker for my astrophotography desires.

Noraiz963/Boost-Converter-
A DC-DC boost converter designed in KiCad, built around the XL6009 adjustable boost converter IC steps up a lower input DC voltage to a higher, adjustable output voltage.


sujitkumar05-pcb/Boost-Converter-V1
Boost Converter V1 is a DC–DC step-up power converter designed to increase a lower input voltage to a higher regulated output voltage.
It measures 50.2 × 21.7 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the XL6009 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the VikramR3/Boost_Converter_V1 repository on GitHub, at the commit this page was made from: the board is Boost_Converter_V1.kicad_pcb and its schematic Boost_Converter_V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).