
Boost converter V1
anurag5197/KiCad-PCB-Projects
A collection of PCB designs created in KiCad as part of my electronics engineering coursework and self-learning.

Designed and developed a DC-DC Boost Converter PCB to efficiently step up low input voltage to a higher regulated output voltage. Created the schematic, PCB layout, and validated the design through simulation and testing using KiCad/Altium Designer.
Boost Converter is an open-source printed circuit board by kumaritanya939-create, from the kumaritanya939-create/DC-DC-Boost-Converter repository on GitHub. It is a 2-layer board of 59.5 × 35.5 mm with 14 parts on 6 nets, routed with 40 tracks and 103 vias.
It is built around the XL6009 and SS34. Its parts include 4 capacitors, 4 connectors, 1 resistor, 1 diode and 1 inductor. It belongs with the power boards of this library.
Designed and developed a DC-DC Boost Converter PCB to efficiently step up low input voltage to a higher regulated output voltage. Created the schematic, PCB layout, and validated the design through simulation and testing using KiCad/Altium Designer.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1, J2, J3, J4 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 1 | 1K | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 220uF/50v | Capacitor_THT:C_Radial_D8.0mm_H7.0mm_P3.50mm | C4 |
| 1 | 33uH | Inductor_SMD:L_12x12mm_H8mm | L1 |
| 1 | 47uF/50V | Capacitor_THT:C_Radial_D8.0mm_H7.0mm_P3.50mm | C1 |
| 1 | 50K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | SS34 | Diode_SMD:D_SMA | D1 |
| 1 | XL6009 | XL6009:DPAK170P1435X465-6N | VR1 |
The 13 most common of 14 parts.

anurag5197/KiCad-PCB-Projects
A collection of PCB designs created in KiCad as part of my electronics engineering coursework and self-learning.

Hirusha785/DC-DC-Boost-Converter-PCB
⚡ A compact DC-DC boost converter PCB designed in KiCad using the XL6009 regulator. Includes schematic, PCB layout, and 3D model for power electronics learning and prototyping. 🔧

hiteshpanigrahi/XL6009-Boost-Converter
This is a custom-designed DC-DC boost converter PCB built around the XL6009 switching regulator IC. It’s capable of efficiently stepping up voltage from as low as 5V up to 32V, delivering up to 4A of output current with…
NBER08/StartrackerOrion-Hardware
A repo on my project of making a DIY startracker for my astrophotography desires.

Noraiz963/Boost-Converter-
A DC-DC boost converter designed in KiCad, built around the XL6009 adjustable boost converter IC steps up a lower input DC voltage to a higher, adjustable output voltage.


sujitkumar05-pcb/Boost-Converter-V1
Boost Converter V1 is a DC–DC step-up power converter designed to increase a lower input voltage to a higher regulated output voltage.

VikramR3/Boost_Converter_V1
XL6009 adjustable DC-DC step-up converter. Designed in KiCad 9.
It measures 59.5 × 35.5 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the XL6009 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kumaritanya939-create/DC-DC-Boost-Converter repository on GitHub, at the commit this page was made from: the board is Boost Converter.kicad_pcb and its schematic Boost Converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kumaritanya939-create before reusing the design.