

ModuleV400
Version 4 of the diyBMS
- Size
- 30 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 28
- Pads
- 103
- Tracks, vias
- 401, 54
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Mar 2019
- Updated
- 25 Oct 2026
Overview
ModuleV400 is an open-source printed circuit board by stuartpittaway, from the stuartpittaway/diyBMSv4 repository on GitHub. It is a 2-layer board of 30 × 50 mm with 42 parts on 28 nets, routed with 401 tracks and 54 vias.
It is built around the ATTINY841-SSU, HMHA2801 and IRLML6244TRPBF, with the SDNT2012X473F4150FTF among its other parts. Its parts include 23 resistors, 4 diodes, 3 capacitors, 2 ICs and 1 transistor. It belongs with the power boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
4ATTINY841-SSU
SOIC-14-40℃~+85℃ 1.7V~5.5V 10bit 12 16MHz 512Byte 512Byte 8 Bit 8KB AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)HMHA2801
SOP-4-1.27mm-55℃~+100℃ 1 1.3V 210mW 3.75kV 3us 3us 400mV@10mA,2mA 50mA 50mA 600% 6V 80% 80V DC Phototransistor SOP-4-1.27mm Transistor, Photovoltaic Output Optoisolators ROHSonsemiTransistor, Photovoltaic Output OptoisolatorsIRLML6244TRPBF
SOT-231 N-channel 1.1V 1.3W 140pF 20V 27mΩ@2.5V 6.3A 700pF 8.9nC@4.5V 98pF SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETsSDNT2012X473F4150FTF
0805-55℃~+125℃ 0.85mm 1.25mm 200mW 200uA 2mW/℃ 2mm 4150K 47kΩ 5s ±1% ±1% 0805 NTC Thermistors ROHSSunlordNTC Thermistors
README
TemperaturePCB/README.mdDIYBMS TEMPERATURE SENSOR BOARD
This is the hardware for a TEMPERATURE SENSOR BOARD. This works with the all-in-one and v450 modules.

KiCAD 7
This design uses KiCAD version 7.0.5. Use the same or newer version for editing and viewing the files. You don't need to install KiCAD if you just wish to build one.
JLCPCB
This design will create a PCB and design files suitable for "almost" full construction at JLCPCB. Some manual soldering will still be required for the connectors and cabling.
Look inside the "export" folder for the relevant production files. Support this project by using JLCPCB referral link https://jlcpcb.com/RSZ when registering for the first time.
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 2R2 1W | Resistors_SMD:R_2512 | R6, R7, R8, R9, R10, R11, R12, R13 |
| 3 | 47K | Resistors_SMD:R_0805_HandSoldering | R15, R20, R21 |
| 2 | 2K2 | Resistors_SMD:R_0805_HandSoldering | R17, R18 |
| 1 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 10K | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 10R | Resistors_THT:R_Axial_Power_L25.0mm_W9.0mm_P27.94mm | R22 |
| 1 | 10uF 10V | Capacitors_SMD:C_0805_HandSoldering | C3 |
| 1 | 1K | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | 2.2uF | Capacitors_SMD:C_0805_HandSoldering | C2 |
| 1 | 220R | Resistors_SMD:R_0805_HandSoldering | R5 |
| 1 | 2K2 | Resistors_SMD:R_0805 | R23 |
| 1 | 402K E96 series (tolerance 1%) | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | 475K E96 series (tolerance 1%) | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | 4K7 | Resistors_SMD:R_0805_HandSoldering | R16 |
| 1 | 510R | Resistors_SMD:R_0805_HandSoldering | R14 |
| 1 | ATtiny841-SSU | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U4 |
| 1 | AVR-ISP-6 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J2 |
| 1 | Battery | Connectors_JST:JST_PH_S2B-PH-K_02x2.00mm_Angled | POWER1 |
| 1 | Blue | LEDs:LED_0805 | D2 |
| 1 | Green | LEDs:LED_0805_HandSoldering | D4 |
| 1 | HMHA2801 | Housings_SSOP:SOP-4_4.4x2.8mm_Pitch1.27mm | U1 |
| 1 | IRLML6244TRPBF | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | LM4040BIM3-2.0/NOPB, 2.048V, SOT-23-3 | TO_SOT_Packages_SMD:SOT-23 | D1 |
| 1 | RED LED | LEDs:LED_0805_HandSoldering | D3 |
| 1 | RX Connector | Connectors_JST:JST_PH_S2B-PH-K_02x2.00mm_Angled | RX1 |
| 1 | Remote temp input 47K @ 25oC | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | SENSOR1 |
| 1 | SDNT2012X473F4150FTF | Resistors_SMD:R_0805_HandSoldering | R19 |
| 1 | TX Connector | Connectors_JST:JST_PH_S2B-PH-K_02x2.00mm_Angled | TX1 |
The 38 most common of 42 parts.
More from stuartpittaway/diyBMSv4
11- 2 layers116 × 75.5 mm

- 4 layers71.1 × 89.6 mm

- 2 layers122.5 × 87.6 mm

- 2 layers61 × 74 mm

- 2 layers30 × 50 mm

- 2 layers30 × 61.3 mm

- 2 layers30 × 61.3 mm

- 2 layers75 × 30 mm

- 2 layers26 × 16.9 mm

- 2 layers10.5 × 83 mm

- 2 layers16 × 29.8 mm

Similar boards
- 2 layers75 × 30 mm

- 4 layers94.5 × 80.5 mm

ReboostV2.1 fixed
fl4p/dcdc-parasitics
KiCad → FastHenry extractor for half-bridge power-stage parasitics (commutation-loop L, common-source inductance, gate-loop L/R) → SPICE subckt + SVG schematic
184 parts - 2 layers79 × 77 mm

- 2 layers112 × 48.8 mm

- 4 layers90.6 × 58.1 mm

EcoApi pcb
EcoApi/EcoApi_BeeHiveMonitoring
describ options with 0R resistors. etc ...
179 parts4GPL-3.0 - 4 layers200 × 100 mm

- 4 layers83 × 55 mm

- 2 layers29.4 × 40.1 mm

Questions
How big is the ModuleV400 PCB?
It measures 30 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ModuleV400 use?
42 parts, built around the ATTINY841-SSU, HMHA2801, IRLML6244TRPBF and SDNT2012X473F4150FTF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ModuleV400 KiCad files?
From the stuartpittaway/diyBMSv4 repository on GitHub, at the commit this page was made from: the board is ModuleV400/v4.kicad_pcb and its schematic ControllerCircuit/ControllerCircuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ModuleV400 design in my own project?
Its repository states no licence, so its author keeps all rights: ask stuartpittaway before reusing the design.