Skip to the content
2 layers29.4 × 40.1 mmCircus agent, the printed circuit board in 3D

Circus agent

ashleyjr/Circus
Full screenGitHub.kicad_pcb
Size
29.4 × 40.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
66
Nets
50
Pads
172
Tracks, vias
609, 45
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
24 Jun 2018
Updated
13 Jan 2019

Overview

Circus agent is an open-source printed circuit board by ashleyjr, from the ashleyjr/Circus repository on GitHub. It is a 2-layer board of 29.4 × 40.1 mm with 66 parts on 50 nets, routed with 609 tracks and 45 vias.

It is built around the C8051F850-C-GU, TSOP38438 and PMV65XPEA, with the IRLML6244TRPBF and M20-9990345 among its other parts. Its parts include 30 resistors, 16 transistors, 7 capacitors, 6 connectors and 3 ICs.

Main components

5

README

README.md

Circus

Installs

Python 2.7

pip

$ sudo apt-get install python-pip python-dev build-essential

$ sudo pip install --upgrade pip

$ sudo pip install --upgrade virtualenv

$ sudo apt-get install python-tk

matplotlib

$ sudo pip install matplotlib

8051

SDCC

SimplicityStudio

Schematic capture/layout

KiCad

$sudo add-apt-repository --yes ppa:js-reynaud/kicad-4

$sudo apt update

$sudo apt install kicad

Docs

$ sudo apt-get install texlive-latex-base

$ sudo apt-get install texlive-latex-extra

GUI

$ sudo apt-get install libgtk-3-dev

Parts

66
QtyValueFootprintReferences
7PMV65XPEAcircus_agent:PMV65XPEAQ11, Q21, Q41, Q71, Q72, Q81, Q82
6220K, 63mW circus_agent:0402R14, R23, R73, R74, R83, R84
510K, 63mW circus_agent:0402R12, R71, R72, R81, R82
5MMBT2222LT1Gcircus_agent:MMBT2222LT1GQ12, Q73, Q76, Q83, Q86
4DNFcircus_agent:0402R41, R43, R61, R62
4IRLML6244TRPBFcircus_agent:IRLML6244TRPBFQ74, Q75, Q84, Q85
4PowerClipcircus_agent:PowerClipJ61, J62, J63, J64
30Rcircus_agent:0402R22, R63, R91
31Kcircus_agent:0402R1001, R1002, R1003
31uF, 6.3Vcircus_agent:0402C91, C92, C1001
3220Kcircus_agent:0402R42, R44, R45
2100nF, 6.3Vcircus_agent:0402C93, C1002
2M20-9990345circus_agent:M20-9990345J1001, J1002
2Motorcircus_agent:MotorM71, M81
1100Rcircus_agent:0402R13
110Kcircus_agent:0402R92
1120Rcircus_agent:0402R11
1220nF, 6.3Vcircus_agent:0402C21
1330R, 63mW circus_agent:0402R21
133Rcircus_agent:0402R32
139Rcircus_agent:0402R31
14F, 5.5Vcircus_agent:SuperCapC51
1C8051F850-C-GUcircus_agent:C8051F850-C-GUU1001
1KPA-1606CGCK(GREEN)circus_agent:KPAD32
1KPA-1606ECR(RED)circus_agent:KPAD31
1LP3985IM5-2.7/NOPBcircus_agent:LP3985U91
1TSOP38438circus_agent:TSOP38438U21

More from ashleyjr/Circus

1

Similar boards

  • 2 layersDevIos Sensor, the printed circuit board in 3D

    DevIos Sensor

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    7 parts915
  • 2 layers160 × 100 mmScoring prototype board, the printed circuit board in 3D

    Scoring prototype board

    AndrewCraswell/agency

    Native KiCad engineering prototype, separate from the earlier ESP32/tscircuit board. Open usb-scoring-platform.kicadpro in KiCad 10; schematic and PCB are the editable source, with no generator required.

    43 partsMIT
  • 4 layers68.6 × 53.3 mmArduino UNO R4 WiFi, the printed circuit board in 3D

    Arduino UNO R4 WiFi

    sabogalc/KiCad-Arduino-Boards

    A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.

    262 parts95WTFPL
  • 4 layers65 × 100 mmPGR, the printed circuit board in 3D

    PGR

    Projeto-Guarda-Rios/PCB

    O repositório para a PCB do Projeto Guarda Rios! Inclui todos os ficheiros relacionados com a PCB!

    188 parts2MIT
  • 4 layers60 × 90 mm2027Payload, the printed circuit board in 3D

    2027Payload

    Bmcneley/2027Payload

    KiCad project files for 2027 Cy Launch payload PCB.

    96 parts
  • 2 layers290 × 280 mmCm5-guard A, the printed circuit board in 3D

    Cm5-guard A

    Brico-Hams/antenaSatCommrotor

    DUPLEXER 145 / 435 MHz — BNC — 25 W TARGET — REV A

    158 parts
  • 2 layers60 × 30 mmPiaggio Amp Circuit, the printed circuit board in 3D

    Piaggio Amp Circuit

    edWho/Piaggio-Fasts-Forward

    KiCAD test - Op Amp desgin

    20 parts
  • 2 layers53.8 × 85.6 mmPCB design, the printed circuit board in 3D

    PCB design

    pplefan13/display-project

    13 parts

Questions

How big is the Circus agent PCB?

It measures 29.4 × 40.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Circus agent use?

66 parts, built around the C8051F850-C-GU, TSOP38438, PMV65XPEA and IRLML6244TRPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Circus agent KiCad files?

From the ashleyjr/Circus repository on GitHub, at the commit this page was made from: the board is agent/hardware/circus_agent.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Circus agent design in my own project?

Its repository states no licence, so its author keeps all rights: ask ashleyjr before reusing the design.