
LM80C R6
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

DIY Sound Voltex Controller Firmware
Sdvx con is an open-source printed circuit board by storycraft, from the storycraft/diy-sdvx-con repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 57.2 × 62.2 mm with 14 parts on 45 nets, routed with 82 tracks and 11 vias.
It is built around the ULN2803A. Its parts include 5 connectors and 1 IC. It belongs with the RP2040 boards of this library.
DIY SDVX Controller Firmware for RP235X microcontroller family.
thumbv8m.main-none-eabihf target)To build and flash firmware, use the following command on workspace root:
cargo xtask flash --releaseThe firmware source code is licensed under GPL-2.0.
The PCB design is licensed under CC BY-NC-ND.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | Keys | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | Keys GND | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | Knobs | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | LOGO | test2 | G*** |
| 1 | LOGO | LOGO | G*** |
| 1 | LOGO | qr-code | Github |
| 1 | Leds | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | Leds VCC | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | Pico 2 | Module:RaspberryPi_Pico_SMD_HandSolder | A1 |
| 1 | ULN2803A | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U3 |

leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

OverInvented/Flippy
The code needed to build a mechanical 7-segment display that uses electromagnets to display characters


crgarcia12/electronics-homeassistant-lightscontroll
A smart lighting controller PCB that integrates seamlessly with ESPHome and Home Assistant while maintaining full compatibility with traditional mechanical switches.




It measures 57.2 × 62.2 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the ULN2803A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the storycraft/diy-sdvx-con repository on GitHub, at the commit this page was made from: the board is pcb/sdvx-con.kicad_pcb and its schematic pcb/sdvx-con.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).