

Usbser
STM32World Development Modules
- Size
- 76.2 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 118
- Pads
- 177
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Jul 2021
- Updated
- 30 Oct 2025
Overview
Usbser is an open-source printed circuit board by STM32World, from the STM32World/hardware repository on GitHub. It is a 2-layer board of 76.2 × 50.8 mm with 17 parts on 118 nets.
It is built around the CP2102N-EK, SRV05-4 and XC6206P332MR. Its parts include 5 capacitors, 3 ICs, 2 resistors, 2 connectors and 1 diode. It belongs with the STM32 boards of this library.
Main components
3CP2102N-EK
-- USB Conversion Modules ROHSSilicon LabsUSB Conversion ModulesSRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)XC6206P332MR
SOT-23-40℃~+85℃@(Ta) 1 1uA 200mA 3.3V 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdstm32world
Documentation is in our wiki: https://stm32world.com/wiki/STM32World
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C4, C5 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | ~ | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1, JP3 |
| 2 | ~ | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2, JP4 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | CP2102N | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U2 |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | STM32WORLD_BASE | stm32world:STM32WORLD_BASE | J2 |
| 1 | XC6206P332MR | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | ~ | stm32world:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | ~ | Diode_SMD:D_SOD-123 | D1 |
More from STM32World/hardware
12- 2 layers76.2 × 50.8 mm

- 2 layers76.2 × 50.8 mm

- 2 layers76.2 × 50.8 mm

- 2 layers76.2 × 50.8 mm

- 4 layers69 × 43.5 mm

- 4 layers70 × 51.5 mm

- 2 layers76.2 × 50.8 mm

- 2 layers76.2 × 50.8 mm

- 2 layers76.2 × 50.8 mm

- 2 layers76.2 × 50.8 mm

- 2 layers76.2 × 50.8 mm

- 2 layers76.2 × 50.8 mm

Similar boards
- 2 layers85 × 56 mm

- 2 layers382 × 160 mm

E80-1800-pcb universal
ebastler/E80-1800
QMK compatible PCB replacement for Cherry G80-1800
451 parts86BSD-2-Clause - 2 layers337.2 × 122.6 mm

- 2 layers337.2 × 122.5 mm

- 2 layers346.1 × 93.7 mm

Sifrl main pcb
ramonimbao/SpaceInvadersFRL
An F-rowless TKL keyboard case, plate, and PCB that uses the HiTek Series 725 switches.
177 parts15 - 2 layers194.3 × 79 mm

- 2 layers87 × 30.8 mm

- 2 layers170 × 120 mm

Questions
How big is the Usbser PCB?
It measures 76.2 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Usbser use?
17 parts, built around the CP2102N-EK, SRV05-4 and XC6206P332MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usbser KiCad files?
From the STM32World/hardware repository on GitHub, at the commit this page was made from: the board is usbser/usbser.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usbser design in my own project?
Its repository states no licence, so its author keeps all rights: ask STM32World before reusing the design.