2 layers95.9 × 112.6 mm
2 layers145.3 × 101.1 mm
StevePico6592
stevegg/Pico6502A variation of Ben Eater's 6502
- Size
- 145.3 × 101.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 88
- Pads
- 317
- Tracks, vias
- 1,461, 42
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 Aug 2023
- Updated
- 11 Oct 2023
Overview
StevePico6592 is an open-source printed circuit board by stevegg, from the stevegg/Pico6502 repository on GitHub. It is a 2-layer board of 145.3 × 101.1 mm with 36 parts on 88 nets, routed with 1,461 tracks and 42 vias.
It is built around the SB140. Its parts include 12 capacitors, 6 ICs, 6 connectors, 5 resistors and 3 diodes. It belongs with the FPGA and CPLD boards of this library.
Main components
1Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 1uF | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 2 | SB140 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2, D3 |
| 1 | 1.843 | Crystal:Crystal_HC52-8mm_Vertical | Y1 |
| 1 | 1m | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 20pF | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C13 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 28C256 | Package_DIP:DIP-28_W15.24mm | U2 |
| 1 | CLK SELECT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | CXO_DIP14 | Oscillator:Oscillator_DIP-14 | X1 |
| 1 | CY62256-70PC | Package_DIP:DIP-28_W15.24mm | U3 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J3 |
| 1 | FTDI Connector | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | FTDI Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | GAL16V8 | Package_DIP:DIP-20_W7.62mm_Socket_LongPads | U7 |
| 1 | GPIOA | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J2 |
| 1 | GPIOB | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J1 |
| 1 | LED | LED_THT:LED_D3.0mm_Clear | D1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | W6551 | Package_DIP:DIP-28_W15.24mm_Socket_LongPads | U6 |
| 1 | W65C02S | Package_DIP:DIP-40_W15.24mm_Socket_LongPads | U1 |
| 1 | W65C22S | Package_DIP:DIP-40_W15.24mm_Socket_LongPads | U4 |
The 35 most common of 36 parts.
Questions
How big is the StevePico6592 PCB?
It measures 145.3 × 101.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the StevePico6592 use?
36 parts, built around the SB140. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the StevePico6592 KiCad files?
From the stevegg/Pico6502 repository on GitHub, at the commit this page was made from: the board is hardware/StevePico6502/StevePico6592.kicad_pcb and its schematic hardware/StevePico6502/StevePico6592.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the StevePico6592 design in my own project?
Its repository states no licence, so its author keeps all rights: ask stevegg before reusing the design.
Similar boards
- 2 layers146 × 134.6 mm
Raven68k rev2
jkuituni/Raven68k
A repository for all the hardware and software development related files for a 68000 based single board computer
78 parts5 - 2 layers100 × 120 mm
PartyLine80
etherkit/PartyLine80
A cheap and cheerful 80 meter QRP CW radio made from all discrete components
194 parts4 - 2 layers88.5 × 74.5 mm
- 2 layers100 × 70 mm
- 2 layers221 × 179 mm
- 2 layers148 × 175 mm
- 2 layers214.2 × 149.5 mm
Eater deluxe
el-puerro/eater-deluxe
6502-based homebrew computer based on eater.net/6502
39 parts1CC-BY-4.0