
MicrasPCB
Team-Micras/MicrasPCB
Micras micromouse PCBs as code: Zener circuits, KiCad layouts, CI checks and a design portal

Gpio expander is an open-source printed circuit board by steinkohl, from the steinkohl/esp32-ethernet-main-pcb repository on GitHub. It is a 2-layer board of 64 × 77.7 mm with 45 parts on 75 nets, routed with 390 tracks and 338 vias.
It is built around the ESP32-S3-WROOM-1-N8, L6981N33DR and TPS4H160AQPWPRQ1, with the MPZ2012S221A among its other parts. Its parts include 12 capacitors, 10 connectors, 8 diodes, 4 resistors and 4 ICs. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 60V 1A | Diode_SMD:D_SOD-323_HandSoldering | D1, D2, D3, D4, D5, D6, D7, D8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 4.7uF | Capacitor_SMD:C_1206_3216Metric | C11, C12, C14 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric | C1, C5 |
| 2 | 1uF 10V | Capacitor_SMD:C_0805_2012Metric | C3, C6 |
| 2 | 22uF | Capacitor_SMD:C_1210_3225Metric | C4, C9 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9, J10 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J7 |
| 2 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4, J5 |
| 2 | Conn_01x06 | Connector_Samtec_HPM_THT:Samtec_HPM-06-05-x-S_Straight_1x06_Pitch5.08mm | J2, J3 |
| 2 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | TPS4H160AQPWPRQ1 | footprints:IC_TPS4H160AQPWPRQ1 | U3, U4 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 33uH | Inductor_SMD:L_Coilcraft_MSS1038T-XXX | L1 |
| 1 | 4.7uH | Inductor_SMD:L_Coilcraft_XAL4030-XXX | L4 |
| 1 | Conn_01x04 | Connector_Samtec_HPM_THT:Samtec_HPM-04-05-x-S_Straight_1x04_Pitch5.08mm | J6 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J8 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U2 |
| 1 | L6981N33DR | beecon:SO-8_L4.9-W3.9-P1.27-LS6.0-BL | U1 |
| 1 | MPZ2012S221A | Inductor_SMD:L_TDK_MLZ2012_h0.85mm | L3 |

Team-Micras/MicrasPCB
Micras micromouse PCBs as code: Zener circuits, KiCad layouts, CI checks and a design portal



joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

bitaxeorg/bitaxeGamma
Bitaxe based on the BM1370 from the S21 Pro


It measures 64 × 77.7 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the ESP32-S3-WROOM-1-N8, L6981N33DR, TPS4H160AQPWPRQ1 and MPZ2012S221A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the steinkohl/esp32-ethernet-main-pcb repository on GitHub, at the commit this page was made from: the board is gpio-expander.kicad_pcb and its schematic dc-dc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask steinkohl before reusing the design.