

Hakkit badusb
- Size
- 40.7 × 18.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 56
- Pads
- 134
- Tracks, vias
- 360, 20
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 27 Sep 2026
- Updated
- 1 Oct 2026
Overview
Hakkit badusb is an open-source printed circuit board by stefanlft, from the stefanlft/hakkit-badusb-board repository on GitHub. It is a 2-layer board of 40.7 × 18.8 mm with 19 parts on 56 nets, routed with 360 tracks and 20 vias.
It is built around the RP2040, W25Q16JVSSIQ and TF-01A, with the WS2812B among its other parts. Its parts include 6 capacitors, 5 resistors, 3 ICs, 1 diode and 1 connector. It belongs with the RP2040 boards of this library.
Main components
4RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q16JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHTF-01A
SMD1.85mm Connector and Ejector MicroSD Card (TF Card) Push-Push With Locating Pins SMD SD Card / Memory Card Connector ROHSHRO ElectronicsSD Card / Memory Card ConnectorWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10kR | Resistor_SMD:R_0603_1608Metric | R2, R6 |
| 2 | 27R | Resistor_SMD:R_0603_1608Metric | R1, R5 |
| 2 | C10nF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | C15pF | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 1 | 1MR | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | C10uF | Capacitor_SMD:CP_Elec_5x3 | C3 |
| 1 | C1uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | Crystal 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | LT1962-3.3 | Package_SO:MSOP-8_3x3mm_P0.65mm | U3 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | TF-01A | TF-01A:TF-01A | MICRO_SD1 |
| 1 | USB_A | Connector_USB:USB_A_Connfly_DS1098_Horizontal | J3 |
| 1 | W25Q16JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U4 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2 |
Similar boards
- 2 layers285 × 94.6 mm

- 2 layers21 × 49.5 mm

- 4 layers64.2 × 66.2 mm

- 4 layers68 × 75 mm

- 2 layers80 × 90 mm

Macro keypad
johnppilli/macro-keypad
Custom USB-C mechanical macro keypad - KiCad PCB design around an RP2040
70 parts - 2 layers91.3 × 105.4 mm

- 4 layers95.5 × 54 mm

- 2 layers35.9 × 62.7 mm

Rp2040-memcard
sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.
60 parts241
Questions
How big is the Hakkit badusb PCB?
It measures 40.7 × 18.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hakkit badusb use?
19 parts, built around the RP2040, W25Q16JVSSIQ, TF-01A and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hakkit badusb KiCad files?
From the stefanlft/hakkit-badusb-board repository on GitHub, at the commit this page was made from: the board is hakkit_badusb.kicad_pcb and its schematic hakkit_badusb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hakkit badusb design in my own project?
Its repository states no licence, so its author keeps all rights: ask stefanlft before reusing the design.