2 layers150 × 100 mm
2 layers28 × 13.8 mm
Panel MainControl Adapter
stefanhepp/eOrganElectronic organ console project.
- Size
- 28 × 13.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 10
- Pads
- 29
- Tracks, vias
- 39, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Oct 2013
- Updated
- 7 Nov 2024
Overview
Panel MainControl Adapter is an open-source printed circuit board by stefanhepp, from the stefanhepp/eOrgan repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 28 × 13.8 mm with 3 parts on 10 nets, routed with 39 tracks and 0 vias.
It belongs with the interfaces and adapters boards of this library.
README
README.mdREADME
This project contains various parts of a midi-organ. The project consists of four main parts:
- The Pedalboard: a 29 note midi foot pedal, mostly ARGO compliant. This odd number of notes was choosen because of size restrictions (I wanted it to fit under my e-piano).
- The organ console: contains stops, a lcd display, and all connectors and hardware to wire it to a PC. Up to three midi keyboards can be used as input devices, as well as the midi pedalboard.
- The organ desk: a framework for all the parts, contains speakers and some additional foot-stops. This is also designed to hold the PC.
- The software: A controller software which allows access to some special features of the hardware and sets up the software synthesizer.
License
Shield: 
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x10 | Connector_PinHeader_2.00mm:PinHeader_1x10_P2.00mm_Vertical | J1, J2 |
| 1 | 10k | Resistor_THT:R_Array_SIP9 | RN1 |
Questions
How big is the Panel MainControl Adapter PCB?
It measures 28 × 13.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panel MainControl Adapter use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel MainControl Adapter KiCad files?
From the stefanhepp/eOrgan repository on GitHub, at the commit this page was made from: the board is boards/Panel-MainControl-Adapter/Panel-MainControl-Adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel MainControl Adapter design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from stefanhepp/eOrgan
12- 2 layers150 × 100 mm
- 2 layers150 × 100 mm
- 2 layers150 × 100 mm
- 2 layers125 × 38.5 mm
- 2 layers150 × 100 mm
- 2 layers110 × 53 mm
- 2 layers150 × 100 mm
- 2 layers142 × 72 mm
- 2 layers95 × 58 mm
- 2 layers
- 2 layers
Similar boards
- 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT