2 layers150 × 100 mm
2 layers95 × 58 mm
ToeStudEncoder
stefanhepp/eOrganElectronic organ console project.
- Size
- 95 × 58 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 47
- Pads
- 131
- Tracks, vias
- 274, 32
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Oct 2013
- Updated
- 7 Nov 2024
Overview
ToeStudEncoder is an open-source printed circuit board by stefanhepp, from the stefanhepp/eOrgan repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 95 × 58 mm with 29 parts on 47 nets, routed with 274 tracks and 32 vias.
It is built around the ATMEGA48-20PI, L7805 and BC547. Its parts include 7 connectors, 6 capacitors, 6 resistors, 3 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA48-20PI
PDIP-28-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 23 256Byte 4KB 512Byte 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC)Microchip TechnologyMicrocontrollers (MCU/MPU/SOC)
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)
README
README.mdREADME
This project contains various parts of a midi-organ. The project consists of four main parts:
- The Pedalboard: a 29 note midi foot pedal, mostly ARGO compliant. This odd number of notes was choosen because of size restrictions (I wanted it to fit under my e-piano).
- The organ console: contains stops, a lcd display, and all connectors and hardware to wire it to a PC. Up to three midi keyboards can be used as input devices, as well as the midi pedalboard.
- The organ desk: a framework for all the parts, contains speakers and some additional foot-stops. This is also designed to hold the PC.
- The software: A controller software which allows access to some special features of the hardware and sets up the software synthesizer.
License
Shield: 
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H4 |
| 3 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R6 |
| 2 | 100nF | Capacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mm | C1, C2 |
| 1 | 100nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C6 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C5 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R5 |
| 1 | 330nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C3 |
| 1 | 33uF | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C4 |
| 1 | 4k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2 |
| 1 | 6N137 | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | ATmega48-20P | Package_DIP:DIP-28_W7.62mm | U1 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | Controller | SnapEDA:SWITCHCRAFT_DMD6FRA111 | J9 |
| 1 | Heatsink_Pad | Custom_Heatsinks:Heatsink_Aavid_TO-220_H12.7mm | HS1 |
| 1 | ISP | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | MIDI In | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | MIDI Out | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Swell | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | ToeLeft | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 1 | ToeRight | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J4 |
Questions
How big is the ToeStudEncoder PCB?
It measures 95 × 58 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ToeStudEncoder use?
29 parts, built around the ATMEGA48-20PI, L7805 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ToeStudEncoder KiCad files?
From the stefanhepp/eOrgan repository on GitHub, at the commit this page was made from: the board is boards/ToeStudEncoder/ToeStudEncoder.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ToeStudEncoder design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from stefanhepp/eOrgan
12- 2 layers150 × 100 mm
- 2 layers150 × 100 mm
- 2 layers150 × 100 mm
- 2 layers125 × 38.5 mm
- 2 layers150 × 100 mm
- 2 layers110 × 53 mm
- 2 layers150 × 100 mm
- 2 layers142 × 72 mm
- 2 layers
- 2 layers
- 2 layers142.1 × 72.1 mm
Similar boards
- 2 layers
- 2 layers100 × 80 mm
- 2 layers
BinaryClock
tomlonca/SnP-BinaryClock
This project is about designing and implementing a binary clock using an AtMega48 microcontroller and a custom PCB.
17 parts - 2 layers100 × 160 mm
EinTaktReset
michAtEl/Bonsai-Modellcomputer
Es gibt auch eine Simulation des Lerncomputers (https://bonsai.pinyto.de/), die im digitalen Informatik-Schulbuch http://inf-schule.de verwendet wird.
45 parts2GPL-3.0 - 2 layers132.1 × 45.7 mm
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers167.8 × 200.6 mm
Random Jazz Generator
telec16/modular-synth
Little side project, don't expect much updates.
132 parts16 - 2 layers117.5 × 56.4 mm
DIY Oxygen Analyzer
ashishkumarpardeshi/DIY_Oxygen_Analyzer
This repository is for Design and Development of DIY Oxygen Analyzer Prototyping Board, Writing Code and Calibration.
42 parts11 - 2 layers100 × 50 mm
