
Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

4 key PCB project based on https://github.com/ruiqimao/keyboard-pcb-guide
4cap keyboard is an open-source printed circuit board by stef-dhaeseleer, from the stef-dhaeseleer/4key_PCB repository on GitHub. It is a 2-layer board of 64.3 × 38.1 mm with 24 parts on 43 nets, routed with 254 tracks and 34 vias.
It is built around the ATMEGA32U4. Its parts include 8 capacitors, 5 switches, 4 resistors, 4 diodes and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
4 key PCB project based on https://github.com/ruiqimao/keyboard-pcb-guide
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1u | Capacitors_SMD:C_0805_HandSoldering | C3, C4, C5, C6 |
| 4 | D | keyboard_parts:D_SOD123_axial | D1, D2, D3, D4 |
| 4 | KEYSW | keebs:Mx_Alps_100 | K1, K2, K3, K4 |
| 2 | 10k | Resistors_SMD:R_0805_HandSoldering | R1, R2 |
| 2 | 22 | Resistors_SMD:R_0805_HandSoldering | R3, R4 |
| 2 | 22p | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 1 | 1u | Capacitors_SMD:C_0805_HandSoldering | C8 |
| 1 | 4.7u | Capacitors_SMD:C_0805_HandSoldering | C7 |
| 1 | ATmega32U4 | Housings_QFP:PQFP-44_10x10mm_Pitch0.8mm | U1 |
| 1 | SW_PUSH | Buttons_Switches_SMD:SW_SPST_TL3342 | SW1 |
| 1 | USB_mini_micro_B | keyboard_parts:USB_miniB_hirose_5S8 | J1 |
| 1 | XTAL_GND | user:crystal_FA238-TSX3225 | X1 |

joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware



evyd13/gh80-series
GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)



It measures 64.3 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the ATMEGA32U4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the stef-dhaeseleer/4key_PCB repository on GitHub, at the commit this page was made from: the board is 4cap_keyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask stef-dhaeseleer before reusing the design.