2 layers100 × 95.3 mm
2 layers444.1 × 151.2 mm
Gh80-3003
evyd13/gh80-series69GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)
- Size
- 444.1 × 151.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 287
- Nets
- 160
- Pads
- 1,075
- Tracks, vias
- 1,488, 216
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Jul 2020
- Updated
- 3 May 2021
Overview
Gh80-3003 is an open-source printed circuit board by evyd13, from the evyd13/gh80-series repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 444.1 × 151.2 mm with 287 parts on 160 nets, routed with 1,488 tracks and 216 vias.
It is built around the ATMEGA32U4 and SRV05-4. Its parts include 131 switches, 114 diodes, 8 capacitors, 7 resistors and 7 inductors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdGH80 series keyboard PCBs for Cherry boards
Please read the license before use. Each board has its own BOM and gerber files included.
These boards have been tested by numerous people, but I cannot guarantee that they work for your board.
I will not help you when you fuck up your soldering work, lol (though I might because I'm just too kind)
Oh by the way, use kicad nightly to open the source files.
GH80-3000 vs GH80-3003
The 3000 is made by someone else, and the 3003 is mine. See it as my take on the same idea.
Parts
287| Qty | Value | Footprint | References |
|---|---|---|---|
| 114 | 1N4148 | Diode_SMD:D_SOD-123 | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +98 |
| 103 | KEYSW | Keeb_switches:CHERRY_PLATE_100H | K1, K10, K11, K100, K101, K102, K103, K104, K106, K108, K109, K110, K110-1, K112, K113, K113-1 +87 |
| 9 | KEYSW | Keeb_switches:CHERRY_PLATE_125H | K60-1, K68, K77-1, K96-1, K97-1, K98-1, K104-1, K105-1, K106-1 |
| 6 | KEYSW | Keeb_switches:CHERRY_PLATE_150H | K23, K63, K69, K99, K105, K107 |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4 |
| 4 | LED | Keeb_switches:CHERRY_MX_LED | L1-1, L2-1, L2-2, L3-1 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric | R3, R4, R6 |
| 3 | LED | Keeb_components:LED_D3.0mm | L1, L2, L3 |
| 3 | USB_mini_micro_B | Keeb_components:USB_Mini_SMD | J2, J3, J4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R5, R7 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | KEYSW | Keeb_switches:CHERRY_PCB_225H | K74, K94 |
| 2 | KEYSW | Keeb_switches:CHERRY_PLATE_175H | K85, K89-1 |
| 2 | KEYSW | Keeb_switches:CHERRY_PCB_200H_V_F | K93, K114 |
| 2 | KEYSW | Keeb_switches:CHERRY_PCB_200H | K53, K111 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | ATmega32U4 | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | Crystal_GND24_Small | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Fuse | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | ISP | Keeb_components:isp_standard | J1 |
| 1 | KEYSW | Keeb_switches:CHERRY_PCB_275H | K83 |
| 1 | KEYSW | Keeb_switches:CHERRY_PCB_625H | K101-1 |
| 1 | KEYSW | Keeb_switches:CHERRY_PCB_200H_V | K72-1 |
| 1 | KEYSW | Keeb_switches:CHERRY_PCB_700H | K89 |
| 1 | LOGO | footprints:logo | G*** |
| 1 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | USB Header | Keeb_components:USB_breakout | J5 |
The 277 most common of 287 parts.
Similar boards
- 2 layers89 × 100 mm
Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!
132 parts388 - 2 layers22.9 × 36.7 mm
Usb2usb
tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware
26 parts152 - 2 layers303.6 × 96.1 mm
- 2 layers114.9 × 77 mm
- 2 layers232.2 × 76.7 mm
- 2 layers373.2 × 131.8 mm
- 2 layers17.8 × 33 mm
Questions
How big is the Gh80-3003 PCB?
It measures 444.1 × 151.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Gh80-3003 use?
287 parts, built around the ATMEGA32U4 and SRV05-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gh80-3003 KiCad files?
From the evyd13/gh80-series repository on GitHub, at the commit this page was made from: the board is GH80-3003_jlc/gh80-3003/gh80-3003.kicad_pcb and its schematic GH80-1800/PCB/gh80-1800.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gh80-3003 design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).