2 layers54 × 54 mm
2 layers
Btctestv0
Starman3787/btc-split-flap1Project to display the value of bitcoin on a split-flap display.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 191
- Pads
- 289
- Tracks, vias
- 393, 120
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Mar 2021
- Updated
- 23 Jan 2024
Overview
Btctestv0 is an open-source printed circuit board by Starman3787, from the Starman3787/btc-split-flap repository on GitHub, published under the MIT licence. It is a 2-layer board with 19 parts on 191 nets, routed with 393 tracks and 120 vias.
It is built around the MIC5353-3.3YMT-TR. It belongs with the STM32 boards of this library.
Main components
1Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | A1363xKTTN-1 | Sensor_Current:Allegro_SIP-4 | U1, U2, U3, U4, U5 |
| 5 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A1, A2, A3, A4, A5 |
| 1 | GL2576-5.0TA5R | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U8 |
| 1 | MIC5353-3.3YMT | Package_DFN_QFN:MLF-6-1EP_1.6x1.6mm_P0.5mm_EP0.5x1.26mm | U7 |
| 1 | STM32F767ZITx | Package_QFP:LQFP-144_20x20mm_P0.5mm | U6 |
The 13 most common of 19 parts.
Questions
What parts does the Btctestv0 use?
19 parts, built around the MIC5353-3.3YMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Btctestv0 KiCad files?
From the Starman3787/btc-split-flap repository on GitHub, at the commit this page was made from: the board is hardware/electronics/teststm/btctestv0/btctestv0.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Btctestv0 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers38 × 35 mm
D1(Motherboard)
BenjaminJAnderson/CUBE
CUBE is a miniature, six-faced OLED display cube built from a stack of custom interconnected PCBs. The current design combines an ESP32-S2 motherboard, five further display boards, a magnet-held 3D-printed frame and…
51 partsMIT - 4 layers65 × 40.1 mm
Aero Zero
ChladpavPy/Aero-Zero
I started this project, because I wanted to build fully autonomous ai drone. When I looked at the flight controllers available on the market, they were full of hardware that I just do not need or just that I could not…
97 parts - 2 layers22.8 × 16 mm
Onizuka
HarkonenBade/onizuka
Psyduck (used in image on the ESP8266 board, due to the pun on ESP->ESP->Psychic) is Trademark & © of Nintendo 1996-2015
30 partsCC-BY-SA-4.0 - 2 layers43.9 × 27.7 mm
- 2 layers50 × 60 mm
Debate Device
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
19 parts915 - 2 layers102.9 × 96.7 mm
ISA adapter
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
19 parts805 - 2 layers60 × 39 mm
