StarlightDescender/tiny-trackerHardware and software for a tiny gps tracker designed for amateur rocketry.
Tiny tracker is an open-source printed circuit board by StarlightDescender, from the StarlightDescender/tiny-tracker repository on GitHub, published under the MIT licence. It is a 4-layer board of 15 × 26.8 mm with 35 parts on 78 nets.
It is built around the MIA-M10Q-00B, BALFHB-WL-01D3 and ANT-916-JJB-RA, with the APTF1616SURKCGKSYKC, B39162B9415K610 and BBGK00160808601Y00 among its other parts. Its parts include 17 capacitors, 6 resistors, 5 ICs, 1 diode and 1 connector. It belongs with the STM32 boards of this library.
Hardware and software for a tiny gps tracker designed for amateur rocketry.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C7, C9, C13 |
| 5 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C11, C12, C14, C16, C17 |
| 2 | 0R | Resistor_SMD:R_0402_1005Metric | R1, R5 |
| 2 | 33p | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 1 | 240R | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 261R | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 270R | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 470n | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 47n | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 50k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 68p | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | ANT-916-JJB-RA | tiny_tracker:XDCR_ANT-916-JJB-RA | AE1 |
| 1 | APTF1616SURKCGKSYKC | tiny_tracker:LED_APTF1616SURKCGKSYKC | D1 |
| 1 | B39162B9415K610 | Filter:Filter_1109-5_1.1x0.9mm | FL1 |
| 1 | BALFHB-WL-01D3 | tiny_tracker:U_BGA8L_CSPG_STM | U2 |
| 1 | BBGK00160808601Y00 | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | DNP | tiny_tracker:PinHeader_1x05_P2.54mm_Vertical_DNP | J2 |
| 1 | MASWSS0176 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U1 |
| 1 | MIA-M10Q-00B | tiny_tracker:LGA_M10Q-00B_UBL | U4 |
| 1 | MLZ2012M150WT000 | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | NCP189CMTW330TAG | tiny_tracker:SON65P200X200X80-7N | U5 |
| 1 | SGGP.12.4.A.02 | tiny_tracker:SGGP124A02 | AE2 |
| 1 | STM32WL55CCUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U3 |
It measures 15 × 26.8 mm and has 4 copper layers, 1.6 mm thick.
35 parts, built around the MIA-M10Q-00B, BALFHB-WL-01D3, ANT-916-JJB-RA and APTF1616SURKCGKSYKC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the StarlightDescender/tiny-tracker repository on GitHub, at the commit this page was made from: the board is v1/Hardware/tracker-transmitter/tiny_tracker.kicad_pcb and its schematic v1/Hardware/tracker-transmitter/tiny_tracker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
antmicro/rdimm-ddr4-tester
Experimental platform built around Xilinx Kintex-7 FPGA for development and customization of RAM controllers supporting RDIMM DDR4 RAM modules used in data centers.
DimitraMTsakiridou/THESIS-UltraLowPower-LoRa-Node
Aiming to address the challenges of remote water quality monitoring and bypass the complexity of standard LoRaWAN networks, this repository contains the from-scratch design, end-to-end implementation, and extensive…
Kev1n8088/MVPGPSTracker
Juno GPS Tracker Repo (Previously named Minimum Viable Product Tracker)
Ilikemining1/ESPWatchS3
ESP32-S3 based smartwatch with CrystalFontz 240x240 1.3in LCD.
OpenDrone-hw/OpenRX
OpenRX open-source ExpressLRS receiver family hub; board sources live in four dedicated hardware repositories.