Tiny tracker
StarlightDescender/tiny-tracker
Hardware and software for a tiny gps tracker designed for amateur rocketry.
Juno GPS Tracker Repo (Previously named Minimum Viable Product Tracker)
MVPGPSTracker is an open-source printed circuit board by Kev1n8088, from the Kev1n8088/MVPGPSTracker repository on GitHub. It is a 2-layer board of 20 × 38 mm with 16 parts on 43 nets, routed with 158 tracks and 34 vias.
It is built around the MAX-M10S, ANT-916-JJB-RA and LQG15HS47NJ02D. Its parts include 4 ICs, 3 resistors, 2 capacitors and 2 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H2, H4 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 10R 0.25W | Resistor_SMD:R_0402_1005Metric | R54 |
| 1 | 10nF X7R | Capacitor_SMD:C_0402_1005Metric | C43 |
| 1 | ANT-916-JJB-RA | FCU2025Lib:XDCR_ANT-916-JJB-RA | E1 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | LOGO | LOGO | G*** |
| 1 | LQG15HS47NJ02 | Inductor_SMD:L_0402_1005Metric | FB2 |
| 1 | MAX-M10S | RF_GPS:ublox_MAX | U1 |
| 1 | MS5607-02BA | Package_LGA:LGA-8_3x5mm_P1.25mm | U6 |
| 1 | UFL | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J5 |
| 1 | WioSX1262 | FCU2025Lib:Wio-SX1262 | U8 |
| 1 | XIAO-MG24-SMD | xiao:XIAO-MG24-SMD | U2 |
StarlightDescender/tiny-tracker
Hardware and software for a tiny gps tracker designed for amateur rocketry.


Kev1n8088/OshTelemega
The Mega3080 FCU is an evolved clone of the Altus Metrum Telemega. Using the same firmware (meaning the same sensor suite), the primary developments are: - USB-C - Wago style spring terminals - Better GPS RF routing…



idlehandsdev/pps-watch
An extremely accurate watch that doesn't tell time.

crnicholson/StratoSoar-MK2
StratoSoar is an engineering project that aims to be able to fly a glider (dropped from a high-altitude balloon), down to any selected coordinates.
It measures 20 × 38 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the MAX-M10S, ANT-916-JJB-RA and LQG15HS47NJ02D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Kev1n8088/MVPGPSTracker repository on GitHub, at the commit this page was made from: the board is MVPGPSTracker.kicad_pcb and its schematic MVPGPSTracker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Kev1n8088 before reusing the design.