Tiny tracker
StarlightDescender/tiny-tracker
Hardware and software for a tiny gps tracker designed for amateur rocketry.

Telemetry box 01 is an open-source printed circuit board by ZakharSergeevich, from the ZakharSergeevich/telemetry_box_pcb repository on GitHub. It is a 4-layer board of 66.8 × 44 mm with 76 parts on 152 nets, routed with 467 tracks and 355 vias.
It is built around the A9G, BGU8019X and ADP150ACBZ-2.8-R7, with the SGGP.12.4.A.02, STBC08PMR and TC2050-IDC-NL among its other parts. Its parts include 42 capacitors, 9 resistors, 7 ICs, 6 inductors and 4 connectors. It belongs with the nRF52 and nRF5x boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0.1u | Capacitor_SMD:C_0201_0603Metric | C3, C4, C5, C8, C15, C17, C22, C24, C25, C26, C29, C31, C41 |
| 7 | 10u | Capacitor_SMD:C_0402_1005Metric | C16, C20, C23, C27, C30, C42, C43 |
| 7 | 22u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C6, C7, C44, C45, C46 |
| 4 | 1u | Capacitor_SMD:C_0402_1005Metric | C21, C28, C37, C38 |
| 2 | 100k | Resistor_SMD:R_0201_0603Metric | R2, R3 |
| 2 | 10k | Resistor_SMD:R_0201_0603Metric | R10, R11 |
| 2 | 10uH | Inductor_SMD:L_0603_1608Metric | L3, L5 |
| 2 | 12 | Capacitor_SMD:C_0201_0603Metric | C11, C12 |
| 2 | 2 | Capacitor_SMD:C_0201_0603Metric | C13, C14 |
| 2 | 5.1k | Resistor_SMD:R_0201_0603Metric | R13, R14 |
| 2 | TC2050-IDC | TAG_CONNECT_2050:CONN_TC2050-IDC_TGC | J5, J6 |
| 1 | +BATT | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP15 |
| 1 | 0 | Resistor_SMD:R_0201_0603Metric | R4 |
| 1 | 0.5 | Capacitor_SMD:C_0201_0603Metric | C10 |
| 1 | 0.8 | Capacitor_SMD:C_0201_0603Metric | C9 |
| 1 | 100 | Capacitor_SMD:C_0201_0603Metric | C18 |
| 1 | 12401832E402A | 12401832E402A:AMPHENOL_12401832E402A | J4 |
| 1 | 12nH | Inductor_SMD:L_0402_1005Metric | L6 |
| 1 | 15nH | Inductor_SMD:L_0402_1005Metric | L4 |
| 1 | 200k | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | 2k | Resistor_SMD:R_0201_0603Metric | R12 |
| 1 | 3.3 | Capacitor_SMD:C_0402_1005Metric | C39 |
| 1 | 4.7nH | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 47 | Capacitor_SMD:C_0201_0603Metric | C32 |
| 1 | 470nH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | 78646-3001 | 78646-3001:MOLEX_78646-3001 | J1 |
| 1 | 820 | Capacitor_SMD:C_0201_0603Metric | C19 |
| 1 | A9G | A9G:A9 | U2 |
| 1 | ABS04W-32.768KHZ-4-D2-T5 | ABS04W-32.768KHZ-4-D2-T5:XTAL_ABS04W-32.768KHZ-4-D2-T5 | Y2 |
| 1 | ADP150ACBZ-2.8-R7 | ADP150ACBZ-2.8-R7:CB_4_3_ADI | U7 |
| 1 | BGU8019 | BGU8019:SOT1232 | U6 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | GND_BATT | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP16 |
| 1 | NC | Capacitor_SMD:C_0402_1005Metric | C36 |
| 1 | NRF_RX | TestPoint:TestPoint_Pad_D2.0mm | TP6 |
| 1 | NRF_TX | TestPoint:TestPoint_Pad_D2.0mm | TP7 |
| 1 | PCS.68.A | RF:PCS.68.A | A2 |
| 1 | SGGP.12.4.A.02 | SGGP.12.4.A.02:SGGP.12.4.A.02 | U5 |
| 1 | SLW-108645-4A-RA-D | SLW-108645-4A-RA-D:SW_SLW-108645-4A-RA-D | S1 |
| 1 | STBC08PMR | STBC08PMR:SON95P300X300X100-7N | U3 |
| 1 | TPS7A2633DRVR | TPS7A2633DRVR:SON65P200X200X80-7N | U4 |
| 1 | nRF52840 | Package_DFN_QFN:Nordic_AQFN-73-1EP_7x7mm_P0.5mm | U1 |
StarlightDescender/tiny-tracker
Hardware and software for a tiny gps tracker designed for amateur rocketry.


Romeo-Lorenzo/DIY_Electromechanical_SmartWatch
I decided to mìhave my own take at a quartz watch by using two Miyota 2035 watch movements and a custom made case and PCB.

cnlohr/esp32_tracker
DO NOT USE THIS PROJECT - ESP32 Tracker with the TS4231



tuna-f1sh/entree
Entree is a USB-C CAN interface designed to fully support CANnectivity - gets the CAN party started!
It measures 66.8 × 44 mm and has 4 copper layers, 1.6 mm thick.
76 parts, built around the A9G, BGU8019X, ADP150ACBZ-2.8-R7 and SGGP.12.4.A.02. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ZakharSergeevich/telemetry_box_pcb repository on GitHub, at the commit this page was made from: the board is telemetry_box_01/telemetry_box_01.kicad_pcb and its schematic telemetry_box_01/telemetry_box_01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ZakharSergeevich before reusing the design.