Skip to the content
2 layers76.2 × 63.5 mmSchematic v1, the printed circuit board in 3D

This is the avionics repository for Project Phoenix, a staged rocket for the FAR 1030 competition.

Size
76.2 × 63.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
73
Pads
167
Tracks, vias
161, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
4 Nov 2019
Updated
2 Apr 2020

Overview

Schematic v1 is an open-source printed circuit board by stanford-ssi, from the stanford-ssi/phoenixAV repository on GitHub. It is a 2-layer board of 76.2 × 63.5 mm with 19 parts on 73 nets, routed with 161 tracks and 0 vias.

It is built around the BMP280 and LSM9DS1. Its parts include 5 connectors, 3 resistors, 3 ICs, 3 diodes and 1 transistor. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

2

README

README.md

phoenixAV

This is the avionics repository for Project Phoenix, a staged rocket for the FAR 1030 competition.

Kicad footprints, pcb files for Passion Fruit Orange Guava, and flight code (Teensy 3.6)

Parts

19
QtyValueFootprintReferences
4Conn_01x02_Femalepcb_library:Terminal_blockJ2, J3, J4, J6
31KResistor_SMD:R_0603_1608MetricR1, R2, R3
3LEDpcb_library:ledD1, D2, D3
1BMP280pcb_library:BMP280U3
1BSC012N06NSATMA1pcb_library:TRANS_BSC012N06NSATMA1Q1
1Conn_01x03_FemaleTerminalBlock:TerminalBlock_bornier-3_P5.08mmJ5
1LSM9DS1pcb_library:DOF9_Gyro_LSM9DS1U2
1Teensy3.6pcb_library:Teensy35_36U1

The 15 most common of 19 parts.

Similar boards

  • 2 layers37.8 × 21.5 mmWiflier EXP, the printed circuit board in 3D

    Wiflier EXP

    cnlohr/wiflier

    ESP8266-based Quadcopter Brain

    61 parts92
  • 4 layers57 × 74.3 mmCM4, the printed circuit board in 3D

    CM4

    ybabs/H745FCS

    Quadcopter Flight Controller based on the dual core STM32H745 Microcontroller

    101 parts6
  • 4 layers44 × 65 mmSensorBoard, the printed circuit board in 3D

    SensorBoard

    NoSleepKid/miniRACER

    A highly advanced Raspberry Pi-driven RC Car with highly advanced sensors and custom PCBs.

    46 parts
  • 4 layers160 × 73.2 mmMainPCB, the printed circuit board in 3D

    MainPCB

    doppelgrau/esp32-f9p-io-board

    An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.

    162 parts39
  • 2 layers43 × 43 mmBadge, the printed circuit board in 3D

    Badge

    oshwabadge2020/Badge-PCB

    Open Hardware Summit 2020 wrist-watch badge

    78 parts19
  • 4 layers128 × 184 mmCosmicpi 1.7, the printed circuit board in 3D

    Cosmicpi 1.7

    CosmicPi/CosmicPiV1.7PCB

    PCB for Version 1.7 of the Cosmic Pi Hardware. Incremental changes from V1.6. This design is licensed under the CERN OHL V1.2

    219 parts14
  • 6 layers44 × 118 mm3210retro test, the printed circuit board in 3D

    3210retro test

    DasBasti/NokiaRetroFit

    Retrofitting a Nokia 3210 with modern Processor

    195 parts9Apache-2.0
  • 4 layers35 × 44.6 mmSprite, the printed circuit board in 3D

    Sprite

    space-technologies-at-california/PCBSat

    PCB Satellite Repository

    73 parts9

Questions

How big is the Schematic v1 PCB?

It measures 76.2 × 63.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Schematic v1 use?

19 parts, built around the BMP280 and LSM9DS1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Schematic v1 KiCad files?

From the stanford-ssi/phoenixAV repository on GitHub, at the commit this page was made from: the board is schematic_v1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Schematic v1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask stanford-ssi before reusing the design.