2 layers96.6 × 82.8 mm
2 layers104.5 × 95.5 mm
Starpie
stairmoss/starbie- Size
- 104.5 × 95.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 27
- Pads
- 46
- Tracks, vias
- 151, 8
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 7 Nov 2026
- Updated
- 7 Nov 2026
Overview
Starpie is an open-source printed circuit board by stairmoss, from the stairmoss/starbie repository on GitHub. It is a 2-layer board of 104.5 × 95.5 mm with 6 parts on 27 nets, routed with 151 tracks and 8 vias.
It is built around the DHT11. Its parts include 2 ICs, 2 connectors and 2 switches. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3305B | SW1, SW2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical_SMD_Pin1Right | J2 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | XIAO-ESP32-C3-SMD | Imported Parts:XIAO-ESP32-C3-SMD | U1 |
Questions
How big is the Starpie PCB?
It measures 104.5 × 95.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Starpie use?
6 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Starpie KiCad files?
From the stairmoss/starbie repository on GitHub, at the commit this page was made from: the board is pcb/starpie.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Starpie design in my own project?
Its repository states no licence, so its author keeps all rights: ask stairmoss before reusing the design.
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5