Skip to the content
4 layers54.3 × 40.5 mmMcu dataa, the printed circuit board in 3D

A custom 4-layer PCB designed in KiCad for an MCU-based data logger system. This project integrates a microcontroller, power management, programming interface, and peripheral connections into a compact and efficient PCB…

Size
54.3 × 40.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
29
Nets
39
Pads
117
Tracks, vias
504, 39
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
25 Jun 2026
Updated
25 Jun 2026

Overview

Mcu dataa is an open-source printed circuit board by sreelekshmih2006-maker, from the sreelekshmih2006-maker/mcu_dataa repository on GitHub. It is a 4-layer board of 54.3 × 40.5 mm with 29 parts on 39 nets, routed with 504 tracks and 39 vias.

It is built around the ATMEGA328P-AU and DS1337S+T&R. Its parts include 7 resistors, 5 capacitors, 4 ICs, 4 connectors and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

MCU Data Logger PCB

A custom 4-layer PCB designed in KiCad for an MCU-based data logger system. This project integrates a microcontroller, power management, programming interface, and peripheral connections into a compact and efficient PCB layout.

Features

  • 4-layer PCB design
  • Dedicated Ground and Power planes
  • Surface Mount Device (SMD) components
  • Microcontroller-based architecture
  • Programming and debugging interface (ICSP)
  • Optimized signal routing
  • Compact PCB layout

Project Structure

text
├── mcu_dataa.kicad_pro      # KiCad project file
├── mcu_dataa.kicad_sch      # Schematic
├── mcu_dataa.kicad_pcb      # PCB layout
├── Libraries/               # Custom libraries (if any)
└── README.md

Software Used

  • KiCad 10
  • Git
  • GitHub

This repository contains the design files for educational and development purposes.

Parts

29
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_2.1mmH1, H2, H3, H4
310KResistor_SMD:R_0805_2012MetricR1, R2, R6
20.1UCapacitor_SMD:C_0805_2012MetricC1, C4
222PFCapacitor_SMD:C_0805_2012MetricC2, C3
224LC1025-I_SM24LC1025-I_SM:SOIC127P794X202-8NU3, U4
2330Resistor_SMD:R_0805_2012MetricR5, R7
24.7kResistor_SMD:R_0805_2012MetricR3, R4
2Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2, J3
2LEDLED_SMD:LED_0805_2012MetricD1, D2
1100nCapacitor_SMD:C_0805_2012MetricC5
116MHZCrystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSolderingY2
132.768hzCrystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSolderingY1
1ATMEGA328P-AUATMEGA328P-AU:QFP80P900X900X120-32NU1
1BatteryConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalBT1
1Conn_01x09_PinConnector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ1
1Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ4
1DS1337S_DS1337S_:SOIC127P600X175-8NU2

Similar boards

  • 2 layers50.2 × 31.2 mmMCU Datalogger, the printed circuit board in 3D

    MCU Datalogger

    futureshocked/KLP4e_MCU-Datalogger

    This is the repository for the "MCU Datalogger" project.

    31 parts138MIT
  • 2 layers42.7 × 24.4 mmBACEE, the printed circuit board in 3D

    BACEE

    futureshocked/KicadLikeAPro-Project-3-BACEE

    This is one of the PCB projects from the Kicad Like a Pro book. It contains a two and four layer board that implements an Arduino clone with external EEPROM and a clock.

    20 parts19MIT
  • 4 layers49.3 × 34.1 mmDattalogger Board, the printed circuit board in 3D

    Dattalogger Board

    DevMajed/DataLogger-Board

    Hardware PCB Design for AVR-based Datalogger using KiCAD

    30 parts4
  • 2 layers41.4 × 27.7 mmDuinoClone, the printed circuit board in 3D

    DuinoClone

    ARHollisSr/DuinoClone

    Arduino Clone with extended EEPROM

    20 parts1MIT
  • 4 layers50 × 30 mmDatalogger v1, the printed circuit board in 3D

    Datalogger v1

    GildardoRestrepo/course_electronics_design

    Repositorio de actividades entregables del curso de diseño electrónico. UPB 2026-02

    35 parts1MIT
  • 2 layers52.2 × 34.4 mmMCU DataLoggerPCB, the printed circuit board in 3D

    MCU DataLoggerPCB

    lologog/MCU_DataLogger

    A microcontroller-based device for logging and storing data from external sensors. The data is saved to EEPROM memory for later retrieval and analysis

    30 parts1MIT
  • 2 layers51.4 × 38.7 mmLayout (2 Layer), the printed circuit board in 3D

    Layout (2 Layer)

    VishwanathKambalyal/MCU-Data-Logger

    Data logger

    30 parts1

Questions

How big is the Mcu dataa PCB?

It measures 54.3 × 40.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Mcu dataa use?

29 parts, built around the ATMEGA328P-AU and DS1337S+T&R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mcu dataa KiCad files?

From the sreelekshmih2006-maker/mcu_dataa repository on GitHub, at the commit this page was made from: the board is mcu_dataa.kicad_pcb and its schematic connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mcu dataa design in my own project?

Its repository states no licence, so its author keeps all rights: ask sreelekshmih2006-maker before reusing the design.