

Golf club draft
- Size
- 99 × 39.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 79
- Pads
- 214
- Tracks, vias
- 229, 41
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Sep 2024
- Updated
- 13 Dec 2024
Overview
Golf club draft is an open-source printed circuit board by squirtledude, from the squirtledude/ece445Notebook repository on GitHub. It is a 2-layer board of 99 × 39.3 mm with 36 parts on 79 nets, routed with 229 tracks and 41 vias.
It is built around the CP2104EK, ESP32-S3-WROOM-1-N8 and LTC4060EFE#PBF. Its parts include 12 resistors, 7 capacitors, 3 transistors, 2 ICs and 2 diodes. It belongs with the ESP32 boards of this library.
Main components
3CP2104EK
-- USB Conversion Modules ROHSSilicon LabsUSB Conversion ModulesESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLTC4060EFE#PBF
TSSOP-16-EP-40℃~+85℃ 1~4 2A 4.5V~10V Charging IC Nickel-Metal Hydride Battery、Ni-Cd Battery Support TSSOP-16-EP Battery Management ROHSAnalog DevicesBattery Management
README
README.mdece445Notebook
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R6, R7, R8, R9, R10, R11, R12 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 2 | Conn_01x04_Socket | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | FSR_IO1, FSR_V1 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 2 | PNP | Connector_PinSocket_1.27mm:PinSocket_1x03_P1.27mm_Vertical | Q1, Q3 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 1.5nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 698 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | AZ1117-1.8 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | 1V8LR1 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | 3V3LR1 |
| 1 | CP2104 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U2 |
| 1 | Conn_01x03_Socket | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | BATTIO1 |
| 1 | Conn_01x05_Socket | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | IMU_IO1 |
| 1 | D_Schottky | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LTC4060EFE | Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm | BATTCHARGER1 |
| 1 | NPN | Connector_PinSocket_1.27mm:PinSocket_1x03_P1.27mm_Vertical | Q2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
More from squirtledude/ece445Notebook
1- 2 layers36 × 33 mm

Similar boards
- 2 layers98.7 × 60.2 mm

Any Screen Touch Screen AnchorMod
Sakhiyuvio/Any-Screen-to-Touch-Screen
Making any screen of any device to become touch-screen. Utilizing UWB transceivers for location distinction with triangulation and TWR algorithms. Our pen enclosure communicates to host device via Bluetooth HID.
46 parts - 2 layers50 × 56 mm

ESP
vadymtaranenko/ESP32-S3-DevBoard
Custom development board oparta na ESP32-S3 z wbudowanym czujnikiem IMU
59 parts - 2 layers97.5 × 81.7 mm

Autonomous Gardening Rover v2
rct4/Autonomous-Soil-Monitoring-Rover
The autonomous soil monitoring rover is a project that aims to assist commercial farmers and personal gardeners by introducing an automated solution to monitoring soil data.
39 parts - 2 layers72 × 42 mm

NRF24 jammer
W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.
51 parts1kMIT - 2 layers59.2 × 41 mm

- 2 layers108 × 95.3 mm

Blue Wizard
wizarddata/Blue-Wizard-Mod
Bluetooth Controller for the Kinesis Advantage line of keyboards using the BlueMicro firmware
47 parts38 - 2 layers67.6 × 14 mm

Double oh
heyspacebuck/double-oh
A WiFi-enabled power supply in a AA battery form factor, designed for sex toys
54 parts37 - 2 layers82.5 × 140 mm

QCamPCR
GaudiLabs/qPocketPCR
Quantitative PCR machine detecting fluorescence using a camera
113 parts22GPL-3.0
Questions
How big is the Golf club draft PCB?
It measures 99 × 39.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Golf club draft use?
36 parts, built around the CP2104EK, ESP32-S3-WROOM-1-N8 and LTC4060EFE#PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Golf club draft KiCad files?
From the squirtledude/ece445Notebook repository on GitHub, at the commit this page was made from: the board is boards/golf_club_draft-2024-10-13_175920/golf_club_draft.kicad_pcb and its schematic boards/golf_club_draft-2024-10-13_175920/golf_club_draft.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Golf club draft design in my own project?
Its repository states no licence, so its author keeps all rights: ask squirtledude before reusing the design.