Skip to the content
2 layers45.9 × 25.6 mmSensor V1.2, the printed circuit board in 3D
Size
45.9 × 25.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
44
Pads
120
Tracks, vias
126, 12
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
8 Jul 2020
Updated
9 Oct 2022

Overview

Sensor V1.2 is an open-source printed circuit board by Squantor, from the Squantor/PPG_sensor_research repository on GitHub, published under the MIT licence. It is a 2-layer board of 45.9 × 25.6 mm with 36 parts on 44 nets, routed with 126 tracks and 12 vias.

It is built around the DMG1012T. Its parts include 7 resistors, 4 connectors, 3 capacitors, 1 IC and 1 transistor. It belongs with the sensors and measurement boards of this library.

Main components

1

README

electronics/Sensor_V1.0/README.md

PPG sensor hardware Version 1.0

After making a raw prototype where some tests have been done it is time to make a PCB version.

HSI (Hardware Software Interface)

This applies to a project that has a embedded software component. Describe what each pin/bus does, what it is connected to, what its function is and some "safe" behaviour when starting up.

TODO's

Still some things need to be done:

  • Further filling in this project description.
  • schematic entry
  • PCB layout
  • Review with one night in between
  • Produce at OSHPARK
  • Assemble
  • Test & characterise
  • update Readme.md with pictures and BOM

BOM

This is a list of hardware components. If just mentioned a generic component like a 1K 0402 resistor, just name it as such, free to substitute. If you need some special integrated IC's show some sources like Mouser, Digikey, Farnell, or LCSC

  • SFH2440 Photodiode
  • Shine through PCB mount LEDs

Pictures

Measurement results

Parts

36
QtyValueFootprintReferences
2100SquantorRcl:R_0402_handR1, R2
21KSquantorRcl:R_0402_handR10, R11
2TBDSquantorRcl:R_0402_handR3, R4
100SquantorTestPoints:TestPoint_hole_H04R07TP11
101SquantorTestPoints:TestPoint_hole_H04R07TP12
106SquantorTestPoints:TestPoint_hole_H04R07TP4
107SquantorTestPoints:TestPoint_hole_H04R07TP5
114SquantorTestPoints:TestPoint_hole_H04R07TP3
115SquantorTestPoints:TestPoint_hole_H04R07TP6
117SquantorTestPoints:TestPoint_hole_H04R07TP7
119SquantorTestPoints:TestPoint_hole_H04R07TP8
11uSquantorRcl:C_0402C1
120SquantorTestPoints:TestPoint_hole_H04R07TP1
120210217SquantorLabels:Label_GenericN2
121SquantorTestPoints:TestPoint_hole_H04R07TP9
122SquantorTestPoints:TestPoint_hole_H04R07TP2
123SquantorTestPoints:TestPoint_hole_H04R07TP10
14.7KSquantorRcl:R_0402_handR8
14n7SquantorRcl:C_0805+0603C9
1DMG1012SquantorIC:SOT23-3Q1
1DevBoardUartInputConnector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_HorizontalJ5
1Ferrite_BeadSquantorRcl:L_0402FB3
1JLCJLCJLCJLCSquantorLabels:Label_GenericN3
1LED_VBUSSquantorSpecial:solder_jumper_2way_noconnJP6
1LED_VDDSquantorSpecial:solder_jumper_2way_noconnJP2
1OHWLOGOSymbol:OSHW-Symbol_6.7x6mm_SilkScreenN1
1PPG_sensorSquantorOpto:PPG_sensor_front_universalU1
1Proto_1pinSquantorProto:proto-SMD-0127-08X06-P010X020+pinJ3
1TBDSquantorRcl:C_0402C2
1notes:SquantorLabels:Label_Note_mediumN4
1nuclone_small_leftSquantorConnectorsNamed:nuclone_small_leftJ1
1nuclone_small_rightSquantorConnectorsNamed:nuclone_small_rightJ2
1p14SquantorTestPoints:TestPoint_hole_H04R07TP13

More from Squantor/PPG_sensor_research

3
  • 2 layers45.9 × 25.6 mmSensor V1.0, the printed circuit board in 3D

    Sensor V1.0

    Squantor/PPG_sensor_research

    55 parts4MIT
  • 2 layers45.9 × 25.6 mmSensor V1.1, the printed circuit board in 3D

    Sensor V1.1

    Squantor/PPG_sensor_research

    44 parts4MIT

Similar boards

  • 2 layers135 × 100 mmHotPlate V1.0, the printed circuit board in 3D

    HotPlate V1.0

    aitesam961/Reflow_Hotplate

    A reflow Hotplate for DIY SMD assembly

    89 parts23GPL-3.0
  • 4 layersBldc, the printed circuit board in 3D

    Bldc

    maruta/Compact-SimpleFOC-Board

    Design file of Compact SimpleFOC Controller Board

    66 parts23MIT
  • 4 layers94.3 × 52.8 mmJetbot mini, the printed circuit board in 3D

    Jetbot mini

    NVIDIA-AI-IOT/jetbot_mini

    While developing the schematic and layout designs, I used some footprints from SnapEDA; in order to avoid dealing with licensing issues, I will not redistribute those files on this Github and instead link to where you…

    188 parts23
  • 2 layers95.3 × 69.9 mmPi compute device, the printed circuit board in 3D

    Pi compute device

    marcbperez/pi-compute-device

    A portable device built with the Raspberry Pi Compute module.

    67 parts11Apache-2.0
  • 6 layers44.5 × 36 mmDefcon-34-v3, the printed circuit board in 3D

    Defcon-34-v3

    bunnie/dc34-core-hw

    Core module hardware design

    187 parts10CERN-OHL-W-2.0
  • 4 layers99.2 × 94.2 mmESP32 ind EVB V3, the printed circuit board in 3D

    ESP32 ind EVB V3

    gmarocco/ESP32indEVB

    ESP32indEVB

    271 parts4
  • 4 layers100 × 95 mmPCK Controller, the printed circuit board in 3D

    PCK Controller

    PecaJosef/PCK-CNC

    PCK-CNC is an open-source CNC router designed to offer precision, reliability, and affordability. This machine combines high-performance features with an accessible design that caters to both beginners and CNC…

    278 parts3GPL-3.0
  • 2 layers50 × 63 mmZenith Development Board, the printed circuit board in 3D

    Zenith Development Board

    zenitheesc/Zenith-Development-Board

    The Zenith Development Board was developed to serve as a first project for the new members of the group.

    69 parts3MIT

Questions

How big is the Sensor V1.2 PCB?

It measures 45.9 × 25.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sensor V1.2 use?

36 parts, built around the DMG1012T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sensor V1.2 KiCad files?

From the Squantor/PPG_sensor_research repository on GitHub, at the commit this page was made from: the board is electronics/Sensor_V1.2/Sensor_V1.2.kicad_pcb and its schematic electronics/LED_DET_cluster_V0.1/LED_DET_cluster_V0.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sensor V1.2 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).