2 layers96.6 × 82.8 mm
2 layers109.2 × 63.5 mm
Serverlüfter
SpitfireXP/ServerFan- Size
- 109.2 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 42
- Pads
- 72
- Tracks, vias
- 123, 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Oct 2024
- Updated
- 4 Jan 2025
Overview
Serverlüfter is an open-source printed circuit board by SpitfireXP, from the SpitfireXP/ServerFan repository on GitHub. It is a 2-layer board of 109.2 × 63.5 mm with 12 parts on 42 nets, routed with 123 tracks and 3 vias.
It is built around the DHT11. Its parts include 11 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.md- Belüftung eines Serverschranks mit Lüftern die noch rumlagen
- Display zur Anzeige von Temperaturen und Lüfterstufe
- Encoder zum Einstellen der Solltemparatur
- 3D-Druck gehäuse um es in den Schrank zu verbauen (In Arbeit)
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | TTL | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2, J3 |
| 1 | ARDUINO_PRO_MINI | ARDUINO_PRO_MINI:MODULE_ARDUINO_PRO_MINI | U1 |
| 1 | Anschluss | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | DC-DC IN+ | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J8 |
| 1 | DC-DC IN- | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J9 |
| 1 | DC-DC OUT+ | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J10 |
| 1 | DC-DC OUT- | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J11 |
| 1 | DHT11 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | Display | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Encoder | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Relais | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
Questions
How big is the Serverlüfter PCB?
It measures 109.2 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Serverlüfter use?
12 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Serverlüfter KiCad files?
From the SpitfireXP/ServerFan repository on GitHub, at the commit this page was made from: the board is PCB/Serverlüfter/Serverlüfter.kicad_pcb and its schematic PCB/Serverlüfter/Serverlüfter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Serverlüfter design in my own project?
Its repository states no licence, so its author keeps all rights: ask SpitfireXP before reusing the design.
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5