

FirstPass
- Size
- 181.6 × 107.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 19
- Pads
- 67
- Tracks, vias
- 112, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 4 Jul 2019
- Updated
- 4 Jul 2019
Overview
FirstPass is an open-source printed circuit board by sphawes, from the sphawes/diySynth repository on GitHub. It is a 2-layer board of 181.6 × 107.3 mm with 20 parts on 19 nets, routed with 112 tracks and 0 vias.
It is built around the TL072. Its parts include 9 resistors, 4 connectors, 2 capacitors, 2 ICs and 1 switch.
Main components
1Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R6 |
| 2 | 470 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R9 |
| 1 | +12v | Connectors:BARREL_JACK | J3 |
| 1 | -12v | Connectors:BARREL_JACK | J4 |
| 1 | 1.5M | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 1.8K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 10nF | Capacitors_SMD:C_0805_HandSoldering | C2 |
| 1 | 1nF | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 24K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 5.6K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 620 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | CEM3340 | Housings_DIP:DIP-16_W7.62mm_Socket_LongPads | U2 |
| 1 | COARSE | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | RV2 |
| 1 | CVJACK | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J1 |
| 1 | OUT | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J2 |
| 1 | SW_DPDT_x2 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | SW1 |
| 1 | TL072 | Housings_DIP:DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | TRIM | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | RV1 |
More from sphawes/diySynth
2- 2 layers70.8 × 108.5 mm

- 2 layers34.9 × 69.9 mm

Similar boards
- 2 layers148 × 84.5 mm

Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
259 parts410 - 2 layers39.6 × 99.1 mm

ESP32-Eurorack Audio
ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module
128 parts260 - 4 layers121.9 × 109.2 mm

Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
300 parts227 - 2 layers58 × 110 mm

- 2 layers37 × 113.9 mm

- 2 layers111.3 × 106.4 mm

Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171 - 2 layers27.9 × 101.6 mm

MFOS Eight Stage Phase Shifter - Main
mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules
105 parts166MIT - 2 layers85.1 × 62.2 mm

Mic extension board
StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
75 parts146
Questions
How big is the FirstPass PCB?
It measures 181.6 × 107.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FirstPass use?
20 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FirstPass KiCad files?
From the sphawes/diySynth repository on GitHub, at the commit this page was made from: the board is cem3340VCO/pcb/firstPass.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the FirstPass design in my own project?
Its repository states no licence, so its author keeps all rights: ask sphawes before reusing the design.