2 layers181.6 × 107.3 mm
2 layers70.8 × 108.5 mm
Sequencer
sphawes/diySynth14- Size
- 70.8 × 108.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 55
- Pads
- 142
- Tracks, vias
- 201, 8
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Jul 2019
- Updated
- 4 Jul 2019
Overview
Sequencer is an open-source printed circuit board by sphawes, from the sphawes/diySynth repository on GitHub. It is a 2-layer board of 70.8 × 108.5 mm with 39 parts on 55 nets, routed with 201 tracks and 8 vias.
It is built around the NE556. Its parts include 10 diodes, 8 resistors, 7 connectors, 5 capacitors and 2 ICs.
Main components
1Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | D_ALT | Diode_SMD:D_SOD-523 | D1, D2, D3, D4, D5, D6 |
| 5 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8, R9, R10, R11, R12 |
| 4 | 50K | stephen:slidePot | P1, P2, P3, P4 |
| 4 | LED | LED_THT:LED_D5.0mm | D7, D8, D9, D10 |
| 4 | SW_SPDT | stephen:PVA1_EE_H2_1.2NV2 | B1, B2, B3, B4 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C5 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 1K | Potentiometer_THT:Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV2 |
| 1 | 220R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 220uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4 |
| 1 | 4017 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | 50K | Potentiometer_THT:Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV1 |
| 1 | 5K6 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | 680R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | CV | stephen:molex_stereo_3.5mm_jack | J2 |
| 1 | C_Small | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | Conn_02x08_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J3 |
| 1 | LOGO | stephen:stephenEmblemBigger | G*** |
| 1 | NE556 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | OUT | stephen:molex_stereo_3.5mm_jack | J1 |
More from sphawes/diySynth
2- 2 layers34.9 × 69.9 mm
Similar boards
- 4 layers184.2 × 169.5 mm
- 2 layers100 × 77.5 mm
- 2 layers100 × 77.5 mm
- 4 layers163 × 174.4 mm
Gd rev3b
baldengineer/Mega-IIe
Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!
440 parts33MIT - 4 layers330.2 × 215.9 mm
- 2 layers134.6 × 106.4 mm
Renovation ssi 2001
roybaer/renovation_ssi_2001
Innovation SSI-2001 replica that can be built without vintage components
95 parts26 - 2 layers88.9 × 63.5 mm
AlpenglowSMTGarden
AlpenglowIndustries/Alpenglow_SMTGarden_PCB
A fun kit with lots of blinky lights and 555 timers that gives you lots of practice with different sizes of surface mount components
155 parts11MIT - 2 layers99.1 × 79.4 mm
Questions
How big is the Sequencer PCB?
It measures 70.8 × 108.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sequencer use?
39 parts, built around the NE556. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sequencer KiCad files?
From the sphawes/diySynth repository on GitHub, at the commit this page was made from: the board is sequencer/pcb/sequencer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sequencer design in my own project?
Its repository states no licence, so its author keeps all rights: ask sphawes before reusing the design.