4 layers69 × 31 mm
Silver
Foalyy/silver-kicad
Kicad project for the Silver open-source, long-range camera remote control
96 parts18GPL-3.0
2 layers
Delfini booster board buddy
SPECNOW/buddy4SPEC Robot
- Copper layers
- 2
- Thickness
- 2 mm
- Parts
- 151
- Nets
- 156
- Pads
- 444
- Tracks, vias
- 63, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Dec 2013
- Updated
- 13 Apr 2026
Overview
Delfini booster board buddy is an open-source printed circuit board by SPECNOW, from the SPECNOW/buddy repository on GitHub. It is a 2-layer board with 151 parts on 156 nets, routed with 63 tracks and 0 vias.
It is built around the R-783.3-1.0, TMP275AID and LM7812, with the TXB0104, TPS2112APW and IRF9540NS among its other parts. Its parts include 51 resistors, 42 connectors, 31 capacitors, 7 ICs and 7 transistors.
Main components
6
R-783.3-1.0
SIP,11.5x7.5mm1 1A 3.3V 3W 4.75V~18V 90% SIP,11.5x7.5mm Isolated Power Modules ROHSRECOM PowerIsolated Power Modules
TMP275AID
SOIC-8-40℃~+125℃ 100nA 12bit 2.7V~5.5V 220ms I2C、SMBus ±0.5℃ SOIC-8 Temperature Sensors ROHSTexas InstrumentsTemperature Sensors
LM7812
TO-263TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIUncategorisedTXB0104
UncategorisedTexas Instruments
TPS2112APW
TSSOP-8-40℃~+85℃ 1 120mΩ 2.8V~5.5V 750mA Active High High Side Switch TSSOP-8 Power Distribution Switches ROHSTexas InstrumentsMonitors & Reset Circuits
IRF9540NS
TO-263MOSFETsMinos
README
README.mdbuddy
SPEC Robot
Clark Was able to clone this repository located at git@github.com:SPECNOW/buddy.git
ADC Module
- Uses ADC and nHET modules
- Using 6 channels on ADC with nHET1_8 as the Triggger
- nHET PWM set for nHET1_8 @ 50% Duty Cycle @ 1 kHz
- Last 10 samples are reported by print ADC info
Parts
151| Qty | Value | Footprint | References |
|---|---|---|---|
| 51 | R | Resistors_SMD:R_0603_HandSoldering | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +35 |
| 19 | C_Small | Capacitors_SMD:C_0603_HandSoldering | C1, C2, C10, C11, C14, C15, C16, C19, C21, C23, C24, C25, C26, C27, C28, C29 +3 |
| 9 | CONN_01X03 | Connectors_Samtec:SL-103-X-XX_1x03 | P1, P8, P9, P11, P12, P13, P15, P18, P25 |
| 7 | CONN_01X01 | Connectors_Samtec:SL-101-X-XX_1x01 | P22, P23, P24, P26, P27, P28, P32 |
| 6 | CONN_01X03 | Connectors_JST:JST_PH_B3B-PH-K_03x2.00mm_Straight | P19, P20, P21, P29, P30, P31 |
| 5 | 2N7002 | digikey-footprints:TO-92-3 | Q1, Q2, Q3, Q4, Q7 |
| 5 | Screw_Terminal_1x04 | Connectors_Phoenix:PhoenixContact_MC-G_04x3.50mm_Angled | J1, J2, J3, J4, J7 |
| 4 | 1792229 | 1792229:PHOENIX_1792229 | J5, J6, J8, J9 |
| 4 | CONN_02X10 | Connectors_Samtec:SDL-120-X-XX_2x10 | P4, P5, P6, P7 |
| 4 | Fuse_Small | digikey-footprints:0603 | F1, F2, F3, F4 |
| 4 | LED | digikey-footprints:LED_3mm_Radial | D1, D2, D3, D4 |
| 3 | CONN_01X02 | Connectors_Samtec:SL-102-X-XX_1x02 | P14, P16, P17 |
| 3 | CP_Small | Capacitors_SMD:C_0603_HandSoldering | C18, C20, C22 |
| 3 | TEST_1P | Connectors:Pin_d1.0mm_L10.0mm | W1, W2, W3 |
| 2 | 0.1u | Capacitors_SMD:C_0603_HandSoldering | C30, C31 |
| 2 | CONN_01X04 | Pin_Headers:Pin_Header_Angled_1x04_Pitch2.54mm | P33, P34 |
| 2 | CONN_01X05 | Connectors_Samtec:SL-105-X-XX_1x05 | P2, P3 |
| 2 | CP1_Small | Capacitors_THT:CP_Radial_D6.3mm_P2.50mm | C5, C6 |
| 2 | CP_Small | Capacitors_THT:CP_Radial_D6.3mm_P2.50mm | C3, C12 |
| 2 | CP_Small | Capacitors_THT:CP_Radial_D10.0mm_P2.50mm_P5.00mm | C4, C13 |
| 2 | Ferrite_Bead_Small | Resistors_SMD:R_1210_HandSoldering | L1, L2 |
| 2 | IRF9540N | TO_SOT_Packages_THT:TO-220-3_Vertical | Q5, Q6 |
| 2 | T90-Relay | 1-1393209-2:RELAY_1-1393209-2 | U2, U6 |
| 1 | CP1_Small | Capacitors_THT:CP_Radial_D10.0mm_P2.50mm_P5.00mm | C17 |
| 1 | LM7812 | TO-220 | U4 |
| 1 | R-783.3-1.0 | TO-220 | U5 |
| 1 | TMP275 | digikey-footprints:SOIC-8_W3.9mm | U1 |
| 1 | TXB0104 | digikey-footprints:TSSOP-14_W4.4mm | U7 |
| 1 | tps2112a | digikey-footprints:TSSOP-8_W4.4mm | U3 |
Questions
What parts does the Delfini booster board buddy use?
151 parts, built around the R-783.3-1.0, TMP275AID, LM7812 and TXB0104. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Delfini booster board buddy KiCad files?
From the SPECNOW/buddy repository on GitHub, at the commit this page was made from: the board is hardware/kiCad_buddyBooster_board/delfini_booster_board_buddy.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Delfini booster board buddy design in my own project?
Its repository states no licence, so its author keeps all rights: ask SPECNOW before reusing the design.
Similar boards
- 2 layers71.1 × 67.9 mm
- 6 layers120.5 × 72.9 mm
- 2 layers89.7 × 36.8 mm
- 2 layers30 × 109 mm
Laser controller
adeboni/eurorack
This repository stores various eurorack module designs I've made
124 parts1GPL-3.0 - 2 layers70.8 × 108 mm
- 2 layers116.3 × 114.5 mm
- 4 layers85 × 60 mm
