4 layers69 × 31 mm
Silver
Foalyy/silver-kicad
Kicad project for the Silver open-source, long-range camera remote control
96 parts18GPL-3.0
2 layers71.1 × 67.9 mm
Microquad v1
HALtheWise/eclectronics-micro-quad- Size
- 71.1 × 67.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 79
- Nets
- 49
- Pads
- 284
- Tracks, vias
- 751, 61
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 Oct 2017
- Updated
- 17 Nov 2017
Overview
Microquad v1 is an open-source printed circuit board by HALtheWise, from the HALtheWise/eclectronics-micro-quad repository on GitHub. It is a 2-layer board of 71.1 × 67.9 mm with 79 parts on 49 nets, routed with 751 tracks and 61 vias.
It is built around the ATMEGA328PB-AU, FT230XS-R and MAX6333UR18D3, with the CD1206-S01575 and TPS2112APW among its other parts. Its parts include 16 diodes, 13 capacitors, 11 resistors, 6 transistors and 5 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5
ATMEGA328PB-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 27 2KB 32KB 8 Bit AVR Built-in FLASH Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Touch function TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
FT230XS-R
SSOP-16-150mil-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART SSOP-16-150mil USB Converters ROHSFTDIUSB Converters
MAX6333UR18D3
SOT-23-3-40℃~+125℃ 1 1.8V 100ms 700mV~5.5V Active Low Push-pull Voltage monitor SOT-23-3 Supervisor and Reset ICs ROHSMaxim Integrated (Analog Devices)Supervisor And Reset ICs
CD1206-S01575
1206-55℃~+125℃ 150mA 1V@50mA 2.5uA@75V 400mW 4A 4ns 75V Standalone 1206 Switching Diodes ROHSBournsSwitching Diodes
TPS2112APW
TSSOP-8-40℃~+85℃ 1 120mΩ 2.8V~5.5V 750mA Active High High Side Switch TSSOP-8 Power Distribution Switches ROHSTexas InstrumentsMonitors & Reset Circuits
README
README.mdeclectronics-micro-quad
Parts
79| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10uF | Capacitors_SMD:C_0805 | C1, C4, C5, C6, C7, C8, C9, C10 |
| 6 | BAS521LP-7 | Diodes_SMD:D_SOD-123F | D5, D7, D9, D11, D13, D15 |
| 6 | DNP | Diodes_SMD:D_2114 | D6, D8, D10, D12, D14, D16 |
| 6 | Motor_DC | motor:quad_motor_v1 | M1, M2, M3, M4, M5, M6 |
| 6 | Q_NMOS_GSD | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | 100nF | Capacitors_SMD:C_0603 | BC1, BC2, BC3, BC4, C2 |
| 5 | 1uF | Capacitors_SMD:C_0603 | C3, Cbat1, Cbat2, Creg1, Creg2 |
| 3 | 1k | Resistors_SMD:R_0603 | R3, R4, R10 |
| 3 | 402 | Resistors_SMD:R_0603 | R7, R8, Rbat2 |
| 3 | LED | LEDs:LED_0805 | D2, D3, D4 |
| 2 | 0.1µF | Capacitors_SMD:C_0603 | Cimu1, Cimu3 |
| 2 | 30.1 | Resistors_SMD:R_0603 | R1, R2 |
| 2 | LED-G | LEDs:LED_0805 | Drx1, Dtx1 |
| 1 | 0.1uF | Capacitors_SMD:C_0603 | Cbat3 |
| 1 | 10K | Resistors_SMD:R_0603 | Rbat1 |
| 1 | 10k | Resistors_SMD:R_0603 | R5 |
| 1 | 10nF | Capacitors_SMD:C_0603 | Cimu2 |
| 1 | 20K | Resistors_SMD:R_0603 | R6 |
| 1 | 2K | Resistors_SMD:R_0603 | Rbat3 |
| 1 | 4.75K | Resistors_SMD:R_0603 | R9 |
| 1 | ATMEGA328PB | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | BM71BLES1FC2 | eclectronics:BM71BLES1FC2 | FP1 |
| 1 | Battery 1x2 | Connectors_JST:JST_PH_S2B-PH-SM4-TB_02x2.00mm_Angled | Jbat1 |
| 1 | CD1206-S01575 | Capacitors_SMD:C_0402 | D1 |
| 1 | Conn_02x03 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | ICSP1 |
| 1 | FT230XS | Housings_SSOP:SSOP-16_3.9x4.9mm_Pitch0.635mm | U3 |
| 1 | MAX6333UR18D3 | TO_SOT_Packages_SMD:SOT-23 | U5 |
| 1 | MCP1703A-3302_SOT23 | TO_SOT_Packages_SMD:SOT-23 | U2 |
| 1 | MCP73812T | TO_SOT_Packages_SMD:SOT-23-5 | U4 |
| 1 | MPU-9250A | imulogger2:QFN40P300X300X105-25N | Uimu1 |
| 1 | POWER | motor:quad_switch | SW2 |
| 1 | RESET | Buttons_Switches_SMD:SW_SPST_B3U-1000P | SW3 |
| 1 | SERIAL | motor:quad_switch | SW1 |
| 1 | TPS2112A | Housings_SSOP:TSSOP-8_4.4x3mm_Pitch0.65mm | Ubat1 |
| 1 | USB_microB_2040002-1 | eclectronics:USB_microB_2040002-1 | J1 |
Questions
How big is the Microquad v1 PCB?
It measures 71.1 × 67.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Microquad v1 use?
79 parts, built around the ATMEGA328PB-AU, FT230XS-R, MAX6333UR18D3 and CD1206-S01575. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Microquad v1 KiCad files?
From the HALtheWise/eclectronics-micro-quad repository on GitHub, at the commit this page was made from: the board is microquad-v1/microquad-v1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Microquad v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask HALtheWise before reusing the design.
Similar boards
- 2 layers
- 2 layers100 × 88 mm
- 4 layers124 × 89.4 mm
ATMega 328 PU Board
olexsu/ATmega328_control_Board
Custom ATmega328 embedded control board designed in KiCad with Arduino firmware.
140 parts - 2 layers95.6 × 92.2 mm
Signal generator
Pejo-306/digital-function-generator
A digital function generator which outputs waveforms up to 10 kHz
63 partsMIT - 2 layers139.5 × 96 mm
- 2 layers56 × 40 mm
- 2 layers77 × 77 mm
Elektroniikkapaja vastaanotin
ripaskajaska/Wireless-weather-station
Aalto University’s ELEC-8701 Elektronics workshop course's repository for Axel Soderberg, Roope Jaskari and Kalle Aro
62 parts