2 layers86 × 54 mm
2 layers100 × 60 mm
PcBadge
spdidle/pcBadge1- Size
- 100 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 44
- Pads
- 138
- Tracks, vias
- 234, 20
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Jul 2026
- Updated
- 2 Jul 2026
Overview
PcBadge is an open-source printed circuit board by spdidle, from the spdidle/pcBadge repository on GitHub. It is a 2-layer board of 100 × 60 mm with 27 parts on 44 nets, routed with 234 tracks and 20 vias.
It is built around the ESP32-S3-WROOM-1-N8 and AMS1117-3.3. Its parts include 7 resistors, 6 capacitors, 3 ICs and 3 switches. It belongs with the ESP32 boards of this library.
Main components
2
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdFallout PCB Badge!
haii this pcb badge is a stupidly simple camera so you can clip your friends and keep the memory forever :p
Schematic
PCB 1
PCB 2
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | LOGO | LOGO | G***, G***, G***, G***, G*** |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R10, R23 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C10 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | OV2640 CAMERA BOARD | easyeda2kicad:SENSORM-TH_L35.7-W3.9-OV2640 | U3 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH-12mm | SW3 |
| 1 | TYPE-C 16PIN 2MD | easyeda2kicad:USB-C-SMD_TYPE-C-16PIN-2MD-073 | USB3 |
Questions
How big is the PcBadge PCB?
It measures 100 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PcBadge use?
27 parts, built around the ESP32-S3-WROOM-1-N8 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PcBadge KiCad files?
From the spdidle/pcBadge repository on GitHub, at the commit this page was made from: the board is hardware/pcBadge/pcBadge.kicad_pcb and its schematic hardware/pcBadge/pcBadge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PcBadge design in my own project?
Its repository states no licence, so its author keeps all rights: ask spdidle before reusing the design.
Similar boards
- 2 layers55 × 100 mm
- 2 layers110 × 100 mm
PidginTranslator
DevMubarak1/PidginTranslator
Handheld translator for Nigerian languages. No internet needed for common phrases, YarnGPT for everything else.
14 parts21MIT - 4 layers58.5 × 85.5 mm
- 2 layers50.6 × 71.1 mm
Open ESPilot
Tomas-Kuchta-FPV/Open-ESPilot
An open-source project to develop a custom ESP32-based flight controller designed primarily for use with ArduPilot. Focused on affordability, flexibility, and ease of integration with various robotic and UAV platforms.
109 parts18CERN-OHL-W-2.0 - 4 layers102 × 100 mm
Zelvicka
RoboticsBrno/Robutek
Robůtek je robotická platforma založená na čipu ESP32-S3. Je velice rozšitiřelný, ale ze základu umí jezdit, kreslit fixou, jezdit po čáře, pohybovat se bludištěm. Programování je přes Jaculus.
214 parts12 - 2 layers156 × 66 mm
Dash 6.8
romioRN/Dash6.8-hardware
wifi name "service", password 12345678, connect to 192.167.4.1
152 parts11Apache-2.0 - 4 layers100 × 100 mm
