2 layers
Fanstel kicad library
hemalchevli/Fanstel-kicad-library
KiCAD symbols and footprints for Fanstel blue-tooth modules.
9 parts17
4 layers28 × 63.8 mm
This repository will contain all the pcb design files for the wave product.
- Size
- 28 × 63.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 145
- Pads
- 332
- Tracks, vias
- 662, 118
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Feb 2025
- Updated
- 14 May 2025
Overview
Wave is an open-source printed circuit board by spawnID0001, from the spawnID0001/allpeople-wave-pcb repository on GitHub. It is a 4-layer board of 28 × 63.8 mm with 78 parts on 145 nets, routed with 662 tracks and 118 vias.
It is built around the BT40F, IM72D128V01XTMA1 and NPM1300-QEAA-R, with the SJ-43516-SMT-TR among its other parts. Its parts include 18 capacitors, 4 resistors, 4 ICs, 4 connectors and 3 diodes.
Main components
4
BT40F
SMD,15x20.8mmOTA (Over-The-Air) upgrade SMD,15x20.8mm Bluetooth Modules ROHSFanstelBluetooth Modules
IM72D128V01XTMA1
SMD-5P-36dB 1.2mm 1.8V 3mm 4mm 72dB 980uA Omnidirectional Omnidirectional pickup SMD-5P MEMS Microphones ROHSInfineon TechnologiesMEMS MicrophonesNPM1300-QEAA-R
QFN-32(5x5)Adjustable current limiting、Light load efficient mode、Output discharge QFN-32(5x5) Power Management - Specialized ROHSNordic SemiconPower Management - Specialized
SJ-43516-SMT-TR
SMD-20℃~+85℃ 12V 1A 3.5mm Headphone Jack Brass、Copper alloy Silver SMD Audio Connectors ROHSCUIAudio Connectors (Headphones)
README
README.md"# allpeople-wave-pcb"
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | 0 | Resistor_SMD:R_0402_1005Metric | 1.8V1, 1.8V2, 1.8V4, D-1, D+1, I2S_LRCK1, I2S_SCK1, I2S_SDI1, I2S_SDO1, MIC_CLK1, MIC_DAT1, MISO1, MOSI1, PDM_CLK1, PDM_DAT1, R1 +17 |
| 11 | 10uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C6, C7, C8, C9, C10, C11, C12, C13, C16, C17 |
| 3 | 0.1uf | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5, C14, C15 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3 |
| 3 | Inolux_IN-PI554FCH | LED_SMD:LED_Inolux_IN-PI554FCH_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3 |
| 3 | PTS815 SJM 250 SMTR LFS | Switch_Pushbutton:SW4_PTS815 SJM 250 SMTR LFS_CNK | SW1, SW2, SW3 |
| 2 | 2.2uH | Inductor_SMD:L_0402_1005Metric | L1, L2 |
| 2 | R | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 1 | .1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C18 |
| 1 | 1.2V | TestPoint:TestPoint_Pad_1.0x1.0mm | 1.2V1 |
| 1 | 1.8V | TestPoint:TestPoint_Pad_1.0x1.0mm | 1.8V3 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 4.7k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | BT40F | BT40F:XCVR_BT40F | U3 |
| 1 | Conn_01x02 | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J4 |
| 1 | GND | Battery:Battery_CR1225 | PAD4 |
| 1 | GND | TestPoint:TestPoint_Pad_D2.0mm | GND |
| 1 | IM72D128V01XTMA1 | Microphone:PG-LLGA-5-3_INF | U1 |
| 1 | MEM2067-02-180-00-A_REVB | Connector_TF:GCT_MEM2067-02-180-00-A_REVB | J3 |
| 1 | NPM1300-QEAA-R | WAVE:QFN50P500X500X90-33N | IC1 |
| 1 | NTC | TestPoint:TestPoint_Pad_D2.0mm | NTC |
| 1 | SJ-43516-SMT | Connector_Audio_SJ43:CUI_SJ-43516-SMT | J2 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | GND |
| 1 | USB4056-03-A_REVA2 | Connector_USBC:GCT_USB4056-03-A_REVA2 | J1 |
| 1 | VBAT | TestPoint:TestPoint_Pad_D2.0mm | V |
| 1 | ~ | WAVE:WAVE_CODEC | U2 |
Questions
How big is the Wave PCB?
It measures 28 × 63.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Wave use?
78 parts, built around the BT40F, IM72D128V01XTMA1, NPM1300-QEAA-R and SJ-43516-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wave KiCad files?
From the spawnID0001/allpeople-wave-pcb repository on GitHub, at the commit this page was made from: the board is pcb-files/Wave.kicad_pcb and its schematic pcb-files/Wave.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wave design in my own project?
Its repository states no licence, so its author keeps all rights: ask spawnID0001 before reusing the design.
Similar boards
- 2 layers29.2 × 18.3 mm
Bat IMU nRF5340
BigBroBob2/bat_tag_nrf5340dk
A custom-designed device to record free-flying bat kinematics, echos, and eye movement
21 parts - 4 layers320 × 320 mm
- 2 layers70.7 × 70.7 mm
Whistler mic array
ccc909/Whistler
Open-source 16-channel USB MEMS microphone array: KiCad PCB design, XMOS XU316 (xcore.ai) USB Audio Class 2 firmware with DFU, BOM and JLCPCB-ready production files. CERN-OHL-S.
96 parts1CERN-OHL-S-2.0 - 4 layers58 × 19.5 mm
Aam bom pcb
antonavhmx/AAM-PCB-
Este repositorio contiene el diseño de hardware y los archivos de manufactura industrial para una tarjeta de circuito impreso de 4 capas.
39 parts - 2 layers80 × 110 mm
NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0 - 4 layers47.1 × 33.5 mm
GamePad I2S audio
intergalaktik/Extension_Boards_for_Olimex_GateMate
Simple extension boards for Olimex GateMate FPGA Board
85 parts20 - 6 layers51 × 65 mm
