
Latest
minipadKB/minipad
The PCB and case files for the minipad, an RP2040-based 2-3-key keypad for the rhythm game osu!.

A
Keyboard is an open-source printed circuit board by Sparrowehawk, from the Sparrowehawk/TKL-keyboard-PCB repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 347.7 × 123.8 mm with 215 parts on 146 nets, routed with 1,107 tracks and 82 vias.
It is built around the RP2040, W25Q128JVSIQ and SRV05-4. Its parts include 87 diodes, 16 capacitors, 9 resistors, 5 switches and 4 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Hi :)
Disclaimer, this PCB has not been printed and tested THEREFORE please do a quick check before you do make something based off this.
Uses a diode-lattice which is controlled via a rp2040 MCU.
Any questions, message me on Discord: @sparrowe
| Qty | Value | Footprint | References |
|---|---|---|---|
| 87 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +71 |
| 77 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1u | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +61 |
| 8 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C9, C13, C14, C15, C16 |
| 7 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1.25u | MX77, MX78, MX79, MX81, MX82, MX83, MX84 |
| 5 | 1u | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4, C8, C10 |
| 5 | 5.1K | Resistor_SMD:R_0402_1005Metric | R1, R2, R4, R5, R6 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R3, R9 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | C11, C12 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1.5u | MX34, MX47 |
| 2 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2.25u | S3, S5 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | BOOT1, RST1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | Conn_01x04 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Fuse_Small | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | MX_SW_HS | PCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1.75u | MX51 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2.75u | S2 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_2u | S4 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_6.25u | S1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U3 |
| 1 | SRV05-4 | PCM_marbastlib-various:SOT-23-6-routable | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U4 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U1 |

minipadKB/minipad
The PCB and case files for the minipad, an RP2040-based 2-3-key keypad for the rhythm game osu!.

ScatteredDrifter/Buran-Ortho
A 39-key orthogonal keyboard with support for two knobs, based on a rp2040





ramonimbao/SpaceInvadersFRL
An F-rowless TKL keyboard case, plate, and PCB that uses the HiTek Series 725 switches.

xommmmmmmm/QueueNineChimera
A drop-in, multi-layout (ortho/row/alpha stagger) PCB with numpad for Keychron Q9
It measures 347.7 × 123.8 mm and has 2 copper layers, 1.6 mm thick.
215 parts, built around the RP2040, W25Q128JVSIQ and SRV05-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Sparrowehawk/TKL-keyboard-PCB repository on GitHub, at the commit this page was made from: the board is KiCad/keyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).