

Home Air Quality Monitor
- Size
- 40.4 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 69
- Pads
- 260
- Tracks, vias
- 483, 77
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Oct 2023
- Updated
- 1 May 2024
Overview
Home Air Quality Monitor is an open-source printed circuit board by sparkfun, from the sparkfun/Home_Air_Quality_Monitor repository on GitHub. It is a 2-layer board of 40.4 × 70 mm with 86 parts on 69 nets, routed with 483 tracks and 77 vias.
It is built around the ESP32-S3-MINI-1-N8, PASCO2V01BUMA1 and AP2112K-3.3. Its parts include 13 resistors, 12 capacitors, 8 ICs, 4 diodes and 4 connectors. It belongs with the sensors and measurement boards and the ESP32 boards of this library.
Main components
3ESP32-S3-MINI-1-N8
SMD-104.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3FN8 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi ModulesPASCO2V01BUMA1
-Gas SensorsInfineon TechnologiesAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | Fiducial_3mm | SparkFun-Aesthetic:Fiducial_1.5mm_Mask3mm | FID5, FID6, FID7, FID8, FID9, FID10, FID11, FID12, FID13, FID14 |
| 5 | 10k | SparkFun-Resistor:R_0603_1608Metric | R3, R7, R9, R11, R12 |
| 4 | 0.1uF | SparkFun-Capacitor:C_0603_1608Metric | C1, C2, C3, C8 |
| 4 | Fiducial_0.5mm | SparkFun-Aesthetic:Fiducial_0.5mm_Mask1mm | FID1, FID2, FID3, FID4 |
| 3 | Red | SparkFun-LED:LED_0603_1608Metric | D2, D3, D4 |
| 2 | 1.0uF | SparkFun-Capacitor:C_0603_1608Metric | C10, C11 |
| 2 | 10uF | SparkFun-Capacitor:C_0603_1608Metric | C4, C12 |
| 2 | 2.2k | SparkFun-Resistor:R_0603_1608Metric | R8, R10 |
| 2 | 5.1k | SparkFun-Resistor:R_0603_1608Metric | R1, R2 |
| 2 | ~ | SparkFun-Jumper:SMT-JUMPER_2_NC_TRACE_SILK | JP2, JP3 |
| 1 | 0.5A | SparkFun-Semiconductor-Standard:SOD-323 | D1 |
| 1 | 100k | SparkFun-Resistor:R_0603_1608Metric | R4 |
| 1 | 10nF | SparkFun-Capacitor:C_0603_1608Metric | C9 |
| 1 | 10uH | SparkFun-Capacitor:C_0805_2012Metric | L1 |
| 1 | 220_0603 | SparkFun-Resistor:R_0603_1608Metric | R15 |
| 1 | 4.7uF | SparkFun-Capacitor:C_0603_1608Metric | C6 |
| 1 | 470pF | SparkFun-Capacitor:C_0603_1608Metric | C5 |
| 1 | 47k | SparkFun-Resistor:R_0603_1608Metric | R5 |
| 1 | 47uF | SparkFun-Capacitor:PANASONIC_D | C7 |
| 1 | 5.62k | SparkFun-Resistor:R_0603_1608Metric | R6 |
| 1 | AP2112K-3.3 | SparkFun-Semiconductor-Standard:SOT23-5 | U6 |
| 1 | AP3012 | SparkFun-Semiconductor-Standard:SOT23-5 | U3 |
| 1 | Conn_01x08 | SparkFun-Connector:1X08 | J3 |
| 1 | Conn_01x12_FPC_0.5mm | SparkFun-Connector:FPC_12_0.5MM | J2 |
| 1 | ESP32-S3-MINI | SparkFun-RF:ESP32-MINI | U2 |
| 1 | G*** | kibuzzard-65B1D5EA | kibuzzard-65B1D5EA |
| 1 | G*** | kibuzzard-65B1E2D2 | kibuzzard-65B1E2D2 |
| 1 | G*** | kibuzzard-65B1DFAF | kibuzzard-65B1DFAF |
| 1 | G*** | kibuzzard-65B1E13C | kibuzzard-65B1E13C |
| 1 | G*** | kibuzzard-65B1D3B2 | kibuzzard-65B1D3B2 |
| 1 | G*** | kibuzzard-65B1E16C | kibuzzard-65B1E16C |
| 1 | G*** | kibuzzard-65B1D56F | kibuzzard-65B1D56F |
| 1 | G*** | kibuzzard-65ECB56E | kibuzzard-65ECB56E |
| 1 | G*** | kibuzzard-65B1E12C | kibuzzard-65B1E12C |
| 1 | G*** | kibuzzard-65B1E11D | kibuzzard-65B1E11D |
| 1 | G*** | kibuzzard-65B1D64A | kibuzzard-65B1D64A |
| 1 | G*** | kibuzzard-65B1D5D4 | kibuzzard-65B1D5D4 |
| 1 | G*** | kibuzzard-65B1D673 | kibuzzard-65B1D673 |
| 1 | G*** | kibuzzard-65F1350E | kibuzzard-65F1350E |
| 1 | G*** | kibuzzard-65B1E2FB | kibuzzard-65B1E2FB |
| 1 | G*** | kibuzzard-65B1E160 | kibuzzard-65B1E160 |
| 1 | G*** | kibuzzard-65B1E10A | kibuzzard-65B1E10A |
| 1 | G*** | kibuzzard-65B27CA0 | kibuzzard-65B27CA0 |
| 1 | G*** | kibuzzard-65B1E14E | kibuzzard-65B1E14E |
| 1 | G*** | kibuzzard-65B1E179 | kibuzzard-65B1E179 |
| 1 | G*** | kibuzzard-65B1E40B | kibuzzard-65B1E40B |
| 1 | LOGO | SparkFun-Aesthetic:SparkFun_Logo_15mm | G*** |
| 1 | MQ-4 Gas Sensor | SparkFun-Sensor:MQ-4 Gas Sensor | U4 |
| 1 | MQ-7 Gas Sensor | SparkFun-Sensor:MQ-7 Gas Sensor | U7 |
| 1 | Measure | SparkFun-Jumper:COMBO-JUMPER_2_NC_TRACE | JP1 |
| 1 | OSHW_Logo | SparkFun-Aesthetic:Creative_Commons_License | G1 |
| 1 | PASCO2V01BUMA1 | SparkFun-Sensor:LG-MLGA-14-1_Z8B00206105 | U5 |
| 1 | PTH_RA_h7.5mm | SparkFun-Switch:Momentary_PTH_RA_8-020_h7.5mm | SW1 |
| 1 | Qwiic_RA | SparkFun-Connector:JST04_1MM_RA | J4 |
| 1 | SEN55 | SparkFun-Connector:JST-6-SMD-1.25MM-LOCKING | U8 |
| 1 | SMD_4.6x2.8mm_h2.5mm | SparkFun-Switch:Momentary_SMD_4.6x2.8mm_h2.5mm | SW2 |
| 1 | Stand_off | SparkFun-Hardware:STAND-OFF | ST1 |
| 1 | TVS_ESD_USB | SparkFun-Semiconductor-Standard:SOT23-6 | U1 |
| 1 | USB_C_Receptacle | SparkFun-Connector:USB-C-16P | J1 |
| 1 | Val** | SparkFun-Aesthetic:OSHW_Logo_6mm | Ref** |
More from sparkfun/Home_Air_Quality_Monitor
1- 2 layers84 × 40.1 mm

Similar boards
- 4 layers66 × 36 mm

Gas sensor
JamesTwallin/gas_sensor
A tiny plug-in board for the rev E phone-companion board. It stands upright in a notch in rev E's sensor end, between the two gas sensor cans, and pokes 4.5 mm out through a slot in the case face, so its tip sits in the…
81 parts7MIT - 4 layers78 × 46.3 mm

- 2 layers460.9 × 228.8 mm

DC-34-Badge panel
Cyber-Professionals-Enthusiast-Club/DC-34-Badge
CPEC Badge Kicad design files for DEFCON 34
276 parts3 - 4 layers129 × 79.8 mm

Rc car
alaotach/rc-car
Quixie is a small autonomous RC delivery car. The custom PCB handles motor control and sensor expansion; the firmware manages navigation, telemetry, and the locking cargo bay.
86 parts2 - 2 layers52 × 38.5 mm

Knob v2
1carusX/Knob
(最初计划走标准 BLE HID 键盘 + 无障碍服务捕获按键,实测目标车机没有暴露无障碍服务开关入口、这条路走不通,现已替换为上面这套自定义 GATT 方案,详见 docs/项目历程与架构.md。)
30 parts1 - 4 layers84 × 25.6 mm

Little Helper
wolkstein/minimal-esp32-ble-midi-ctrl
A simple Bluthooth Midi DAW transport control unit based on an esp32 mc
41 parts1GPL-3.0 - 4 layers88 × 58 mm

BIOCHEST ECG EMG
8aChristian/BIOCHEST-ECG-EMG
Figure 1: Full 4-Layer High-Density Medical PCBA with Galvanic Isolation Barrier & Routed Copper Tracks.
29 parts - 2 layers66.3 × 96.1 mm

Questions
How big is the Home Air Quality Monitor PCB?
It measures 40.4 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Home Air Quality Monitor use?
86 parts, built around the ESP32-S3-MINI-1-N8, PASCO2V01BUMA1 and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Home Air Quality Monitor KiCad files?
From the sparkfun/Home_Air_Quality_Monitor repository on GitHub, at the commit this page was made from: the board is PCBs/MainBoard.kicad_pcb and its schematic PCBs/EpaperDisplayPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Home Air Quality Monitor design in my own project?
Its repository states no licence, so its author keeps all rights: ask sparkfun before reusing the design.