2 layers25.4 × 25.4 mm
SparkFun Qwiic 1U Breakout
sparkfun/SparkFun_Default_KiCad_Setup
A handful of example KiCad projects containing the defaults most used by SparkFun.
67 parts4
2 layers19 × 7.6 mm
SparkFun Example Micro
sparkfun/SparkFun_Default_KiCad_Setup4A handful of example KiCad projects containing the defaults most used by SparkFun.
- Size
- 19 × 7.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 19
- Pads
- 52
- Tracks, vias
- 90, 14
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Aug 2023
- Updated
- 22 Oct 2026
Overview
SparkFun Example Micro is an open-source printed circuit board by sparkfun, from the sparkfun/SparkFun_Default_KiCad_Setup repository on GitHub. It is a 2-layer board of 19 × 7.6 mm with 35 parts on 19 nets, routed with 90 tracks and 14 vias.
It is built around the LIS3DH. Its parts include 4 resistors, 3 connectors, 2 capacitors, 1 IC and 1 diode.
Main components
1README
README.mdSparkFun Default KiCad Setup
A simple 2x2" board
The SparkFun Default KiCad Setup is a complete KiCad project that contains a schematic and PCB. These are meant to be used as the starting point for a new KiCad project. Additionally, this project's settings can be imported into KiCad for things like layer stackup, DRC warnings, trace and via defaults, and other commonly used settings that need to be set, but usually only once.
License Information
This product is open source!
Please review the LICENSE.md file for license information.
If you have any questions or concerns about licensing, please contact technical support on our SparkFun forums.
Distributed as-is; no warranty is given.
- Your friends at SparkFun.
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.75mm | SparkFun-Connector:TestPoint-0.75mm | TP5, TP6, TP7, TP8 |
| 2 | 2.2k | SparkFun-Resistor:R_0402_1005Metric | R1, R6 |
| 2 | Fiducial_0.5mm | SparkFun-Aesthetic:Fiducial_0.5mm_Mask1mm | FID3, FID4 |
| 2 | PTH_1x1mm | SparkFun-Connector:1x01_P2.0mm | J1, J5 |
| 1 | 0.1uF | SparkFun-Capacitor:C_0402_1005Metric | C3 |
| 1 | 10k | SparkFun-Resistor:R_0402_1005Metric | R2 |
| 1 | 10uF | SparkFun-Capacitor:C_0402_1005Metric | C4 |
| 1 | 4.7k | SparkFun-Resistor:R_0402_1005Metric | R3 |
| 1 | ADR | SparkFun-Jumper:Jumper_2_NO | JP3 |
| 1 | Flame | SparkFun-Aesthetic:SparkFun_Flame_3mm | G*** |
| 1 | G*** | kibuzzard-689A65FB | kibuzzard-689A65FB |
| 1 | G*** | kibuzzard-689A65F1 | kibuzzard-689A65F1 |
| 1 | G*** | kibuzzard-689A6605 | kibuzzard-689A6605 |
| 1 | G*** | kibuzzard-689A6665 | kibuzzard-689A6665 |
| 1 | G*** | kibuzzard-689A665F | kibuzzard-689A665F |
| 1 | G*** | kibuzzard-689A65D0 | kibuzzard-689A65D0 |
| 1 | G*** | kibuzzard-689A65DA | kibuzzard-689A65DA |
| 1 | G*** | kibuzzard-689A6672 | kibuzzard-689A6672 |
| 1 | G*** | kibuzzard-689A660E | kibuzzard-689A660E |
| 1 | G*** | kibuzzard-689A6668 | kibuzzard-689A6668 |
| 1 | I2C | SparkFun-Jumper:Jumper_3_NC-2_Trace | JP2 |
| 1 | LED | SparkFun-Jumper:Jumper_2_NC_Trace | JP1 |
| 1 | LIS3DH | SparkFun-Sensor:ST_LGA-16_3x3mm_P0.5mm_5x3 | U1 |
| 1 | LOGO | SparkFun-Aesthetic:qwiic_3mm | G*** |
| 1 | OSHW_Logo | SparkFun-Aesthetic:Creative_Commons_License | G4 |
| 1 | Qwiic_RA | SparkFun-Connector:JST_1x04_P1.0mm_Horizontal_SMD | J2 |
| 1 | Red | SparkFun-LED:LED_0402_1005Metric_Red | D1 |
| 1 | Standoff | SparkFun-Hardware:Standoff | ST1 |
| 1 | Val** | SparkFun-Aesthetic:OSHW_Logo_2.5mm | Ref** |
Questions
How big is the SparkFun Example Micro PCB?
It measures 19 × 7.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SparkFun Example Micro use?
35 parts, built around the LIS3DH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SparkFun Example Micro KiCad files?
From the sparkfun/SparkFun_Default_KiCad_Setup repository on GitHub, at the commit this page was made from: the board is Example-Qwiic Micro Breakout/SparkFun_Example_Micro.kicad_pcb and its schematic Example-Basic Board/SparkFun_Basic_Board_Example.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SparkFun Example Micro design in my own project?
Its repository states no licence, so its author keeps all rights: ask sparkfun before reusing the design.
More from sparkfun/SparkFun_Default_KiCad_Setup
2- 4 layers50.8 × 50.8 mm
SparkFun Basic Board Example
sparkfun/SparkFun_Default_KiCad_Setup
A handful of example KiCad projects containing the defaults most used by SparkFun.
20 parts4
Similar boards
- 2 layers52 × 26 mm
- 2 layers89.8 × 10.2 mm
- 4 layers83 × 83 mm
Blinkekatze
TobleMiner/blinkekatze
Blinkekatze, a replacement PCB to turn cat themed night-lights into interactive light displays
134 parts34 - 2 layers59.2 × 93.2 mm
Aws iot expresslink demo badge
aws/iot-expresslink
This device was designed and created for the AWS IoT ExpressLink Demo Badge Workshop, which was run at re:Invent 2022.
74 parts29MIT-0 - 8 layers50 × 50 mm
USB C PSU
LeoDJ/USB-C_PD_PSU
A 5-60V bidirectional buck-boost-converter, also capable of 240W USB PD EPR (48V 5A)
149 parts29 - 2 layers64.6 × 87.1 mm
- 2 layers56.5 × 66.8 mm
- 4 layers55.5 × 48 mm
