Skip to the content
2 layers100 × 100 mmNESPICO RevB, the printed circuit board in 3D

Status: schematic ERC 0 violations. PCB 100x100 mm, 2 layers, parts placed, NOT ROUTED (499 unconnected items). Freerouting 2.1.0 left about 271 nets unrouted after 4 passes. Do not order from fab/ yet.

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
106
Nets
144
Pads
660
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
12 Oct 2026
Updated
4 Nov 2026

Overview

NESPICO RevB is an open-source printed circuit board by spaghetti-computer, from the spaghetti-computer/lasagna repository on GitHub. It is a 2-layer board of 100 × 100 mm with 106 parts on 144 nets.

It is built around the 74LVC245APW,118, 74LVC541APW and 74HC165D,653-JSM, with the 74HCT74D, 74AHCT32PW,118 and 74HC595D,118 among its other parts. Its parts include 55 resistors, 19 capacitors, 16 ICs, 9 connectors and 1 diode. It belongs with the RP2350 boards of this library.

Main components

10

README

hardware/kicad/revb/README.md

LASAGNA2354 (ラザニア2354) Rev.B KiCad project (PROPOSAL, NOT FAB-READY)

Status: schematic ERC 0 violations. PCB 100x100 mm, 2 layers, parts placed, NOT ROUTED (499 unconnected items). Freerouting 2.1.0 left about 271 nets unrouted after 4 passes. Do not order from fab/ yet. The gerber zip has "UNROUTED" in its name on purpose.

Regenerate with: python3 gen_sch.py; python3 gen_pcb.py; python3 export_fab.py (design.py is the single source of truth)

Unverified / open items

  • Famicom 60-pin slot footprint: a 2x30 placeholder. Pitch and mechanics are not verified.
  • DA-15 expansion pinout is not verified.
  • RCA jack footprint is custom and not verified.
  • $4016 parallel decode is not implemented. Only the SJ3 alternate input exists.
  • CIRAM SRAM is omitted.
  • Status buffer vs PPU latch contention is avoided by firmware only.
  • 74HCT139 decode: possible glitch/race. Not analysed on hardware.
  • LVC245 drives the cart with 3.3 V levels (assumed OK for NMOS/CMOS mask ROMs). Not verified.
  • SN74AHCT574PWR (C129433) is a JLC Extended part. Stock was 0 when checked.
  • Routing: needs a denser placement, or a 4-layer board, or manual routing.

Parts

106
QtyValueFootprintReferences
5010kResistor_SMD:R_0603_1608MetricR1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +34
16100nFCapacitor_SMD:C_0603_1608MetricC10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25
5SN74AHCT574PWRPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU1, U2, U3, U4, U5
310uFCapacitor_SMD:C_0805_2012MetricC1, C2, C3
21kResistor_SMD:R_0603_1608MetricR98, R99
274HC165DPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU14, U15
274HCT74DPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU10, U11
274LVC245APWPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU6, U7
1220Resistor_SMD:R_0603_1608MetricR92
1470Resistor_SMD:R_0603_1608MetricR91
1500mA_PTCFuse:Fuse_1206_3216MetricF1
174AHCT32PWPackage_SO:TSSOP-14_4.4x5mm_P0.65mmU13
174HC595DPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU16
174HCT04DPackage_SO:SOIC-14_3.9x8.7mm_P1.27mmU9
174HCT139DPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU12
174LVC541APWPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU8
1910Resistor_SMD:R_0603_1608MetricR90
1AO3401APackage_TO_SOT_SMD:SOT-23Q1
1CART_ONLED_SMD:LED_0603_1608MetricD1
1CART_PWRButton_Switch_THT:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfileSW1
1CVBS_ALTConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ7
1Famicom_60pin_slotConnector_PinHeader_2.54mm:PinHeader_2x30_P2.54mm_VerticalJ3
1Famicom_expansion_DA15Connector_Dsub:DSUB-15_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mmJ5
1PU_CPU_ENJumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mmSJ1
1PU_PPU_ENJumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mmSJ2
1Pico2_pins1-20Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_VerticalJ1
1Pico2_pins40-21Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_VerticalJ2
1RCA_CVBSNESPICO_RevB:RCA_Jack_Generic_THT_UNVERIFIEDJ6
1SR_QH|STAT|PARJumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mmSJ3
1TP_ADDRConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ9
1TP_BUS_CTRLConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ8
1TP_SR_SPAREConnector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalJ10

More from spaghetti-computer/lasagna

3
  • 2 layers100 × 62 mmLASAGNA2354 RevC, the printed circuit board in 3D

    LASAGNA2354 RevC

    spaghetti-computer/lasagna

    Status: schematic ERC 0 violations. PCB 100x100 mm, 2 layers, parts placed, NOT ROUTED (499 unconnected items). Freerouting 2.1.0 left about 271 nets unrouted after 4 passes. Do not order from fab/ yet.

    141 parts
  • 2 layers100 × 67 mmLASAGNA2354 Lite, the printed circuit board in 3D

    LASAGNA2354 Lite

    spaghetti-computer/lasagna

    Status: schematic ERC 0 violations. PCB 100x100 mm, 2 layers, parts placed, NOT ROUTED (499 unconnected items). Freerouting 2.1.0 left about 271 nets unrouted after 4 passes. Do not order from fab/ yet.

    78 parts
  • 2 layers100 × 82 mmNESPICO 8bit fixture, the printed circuit board in 3D

    NESPICO 8bit fixture

    spaghetti-computer/lasagna

    Status: schematic ERC 0 violations. PCB 100x100 mm, 2 layers, parts placed, NOT ROUTED (499 unconnected items). Freerouting 2.1.0 left about 271 nets unrouted after 4 passes. Do not order from fab/ yet.

    11 parts

Similar boards

  • 2 layers100 × 100 mmRioctrl shiftio, the printed circuit board in 3D

    Rioctrl shiftio

    festlv/rioctrl-hw

    Hardware design for modular CNC controller

    141 parts16CERN-OHL-S-2.0
  • 2 layers333.9 × 141.1 mmKaboom box, the printed circuit board in 3D

    Kaboom box

    NPC-jakobmoenster/Kaboom_Box

    Repository to hold documents for Kaboom Box

    249 parts
  • 2 layersLM80C R6, the printed circuit board in 3D

    LM80C R6

    leomil72/LM80C

    A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

    153 parts123GPL-3.0
  • 2 layers107.5 × 80.3 mmD32 disk controller, the printed circuit board in 3D

    D32 disk controller

    jimbro1000/DragonDiscController

    Recreation of DragonDos disc controller cartridge

    29 parts1MIT
  • 2 layers368.3 × 215.9 mmTTL 6510 Computer fab, the printed circuit board in 3D

    TTL 6510 Computer fab

    StefansAI/TTL-6510-Computer

    Yet another CPU made from TTL chips

    330 parts1
  • 4 layers296 × 220 mmInterposer, the printed circuit board in 3D

    Interposer

    AlexColello/discrete-nes

    A discrete logic implementation of the Nintendo Entertainment System where EVERY single gate output and EVERY memory bit is visible via LED. Watch a complete NES flip every bit in real-time.

    107 parts
  • 2 layers40 × 33 mmTiny vga, the printed circuit board in 3D

    Tiny vga

    mole99/tiny-vga

    Tiny VGA Pmod board designed in KiCad

    32 parts26CC-BY-SA-4.0
  • 4 layers65.6 × 41.4 mmPicopocket, the printed circuit board in 3D

    Picopocket

    korneliuszo/picopocket-hw

    Addon for Pocket386 based on rpi pico w

    88 parts11

Questions

How big is the NESPICO RevB PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the NESPICO RevB use?

106 parts, built around the 74LVC245APW,118, 74LVC541APW, 74HC165D,653-JSM and 74HCT74D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the NESPICO RevB KiCad files?

From the spaghetti-computer/lasagna repository on GitHub, at the commit this page was made from: the board is hardware/kicad/revb/NESPICO_RevB.kicad_pcb and its schematic hardware/kicad/NESPICO_Interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the NESPICO RevB design in my own project?

Its repository states no licence, so its author keeps all rights: ask spaghetti-computer before reusing the design.